• Analytical Science and Technology
• /
• v.27 no.1
• /
• pp.22-26
• /
• 2014

1,4-Dioxane was classified as a Group 2B carcinogen by the International Agency for Research on Cancer. The compound was measured in surface water with a headspace gas chromatographic mass spectrometric detection. A 5 mL water sample was placed in a 10 mL headspace vial and saturated with NaCl, and the solution was spiked with 1,4-dioxane-d8 as an internal standard and sealed with a cap. Water samples were collected from twenty-two basins of Gum-River on June and September 2012, respectively. As a result, 1,4-dioxane was detected in the concentration range of $0.49-43.0{\mu}g/L$ (mean $2.0{\mu}g/L$) in the frequency of about 30% in surface water samples.

• The Journal of the Korea Contents Association
• /
• v.15 no.7
• /
• pp.343-352
• /
• 2015

This purpose of this study was to identify view of occupational therapy fieldwork supervisor and novice occupational therapists in job. 117 fieldwork supervisor and 104 novice occupational therapists that work on 58 domestic hospitals were chosen. The collected data were analyzed by using the SPSS 20.0 statistics package for Window which determined frequency, percentage, mean, standard deviation, median, and range. The following are the results of this study. First, fieldwork supervisor considered that basic refinement and manners are most important when they evaluate student. Second, novice occupational therapists responded that importance is 10 points, conduction is 7 points, and satisfaction is 6 points in general job. Third, importance of fieldwork supervisor for the job were problem identification and established intervention plan in intervention plan appears over the first 2 above. But, conduction of novice occupational therapists for the job were evaluation in all 4 of the top 5 except 2 place. The results of this study are expected to be used as direction guidance of fieldwork to the solve difficulty of novice occupational therapists.

• Journal of the Korean Society of Fisheries and Ocean Technology
• /
• v.39 no.3
• /
• pp.181-188
• /
• 2003

The objects of this study were to discuss the performance of its using magnetic compass and to do a trial manufacture of the apparatus generating artificial magnetic field of 3-axis type to assess the performance of compass using terrestrial magnetism in the various magnetic field. The results obtained were summarized as follows: The magnetic field of each axis showed the linearly increase in accordance with the increase of electrical current. Average range difference between measured and calculated values was 0.33∼1.93μT and there were no big difference. The magnitude and direction of magnetic field showed some change in the edge of Helmholtz coil, but it appeared to stabilize in the center. In the horizontal magnetic force of 0.30gauss and 0.40gauss, the measured and calculated values of the damping characteristic of magnetic compass showed a good agreement. However, the confidence level was low at the horizontal magnetic force of 0.50gauss.

• Journal of Korean Society of Coastal and Ocean Engineers
• /
• v.18 no.3
• /
• pp.262-267
• /
• 2006

For the concentration management in COD parameters, it requires the measurement and estimation of the COD pollutants load (hereinafter PL) in the watershed. The estimation method of the PL, however, is provided only based on the BOD parameters. The development of COD PL estimation schemes is expected to execute total PL management in coastal zone and needs to more observation and much time. This study provides COD PL estimation schemes using statistical information about ratio analysis with COD & BOD concentration of rivers and drainages of an industrial complex in Lake Shiwha and Incheon Coastal Zone watershed. The COD PL is computed with ease by multiplying the conversion factor, which is calculated as the sum of the average and 1 to 3 (safety factors) times standard deviation. The conversion factor of Lake Shihwa and Incheon Coastal Zone is estimated as 1.7, 2.3 and 2.9 with respect to the safety factor 1, 2, and 3, respectively.

• Proceedings of KOSOMES biannual meeting
• /
• 2006.11a
• /
• pp.163-168
• /
• 2006

In order to develop the deep ocean water, we performed to study the characteristics of vertical distribution of dissolved trace metals(Cd, Co, Cu, Ni, Pb, Zn) from Apr. to Oct., 2005 in the East Sea. Total six sampling sites were selected in Gangwon-Do and Gyeongsanbuk-Do. Accuracy of the analytical procedures was assessed by the SRM(CASS-4) for dissolved metals in seawater. The mean recoveries of CASS-4 ranged from 89.4% for Co to 99.8% for Cd. In this study, the dissolved metal concentrations varied with space, time and element. The metal concentrations showed wide range in the surface. Cd, Ni and Zn showed a nutrient-type profile with surface depletion and enrichment at depth. However, Co, Cu and Pb were irregular in the vertical distribution. All metal concentrations studied in this study are lower than the criteria of Korean drinking water.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.14 no.8
• /
• pp.3665-3671
• /
• 2013

This study was investigate to impact on safety accidents occurrence for the safety practices of middle school students learn the extent of the failure. A total of 292 patients and it survey data were collected from 5 November 2012 to 11 May 25 of research subjects. Research tools were used SPSS win17.0, the mean and standard deviation, Paired t-test, Pearson's correlation coefficient was used. Safey practice and cognitive failure of subjects was related to negative correlation and according as safety practices was higher, cognitive failure was low. According as safety practices and cognitive failure was low, Safety incidents experienced was high. Therefore, by applying safety practices and cognitive failure degree, it need to for research to come up with ways for the prevention of safety accidents. Besides, A variety of safety and accident prevention training programs by expanding the scope of the study in school, it should be done generalization of safety awareness, cultivate and Safety practice.

• Journal of the Korea Concrete Institute
• /
• v.26 no.3
• /
• pp.343-350
• /
• 2014

A probabilistic construction stage analysis using the Monte Carlo Simulation was performed to address the effects of uncertainty regarding the material properties, environmental factors, and applied forces. In the previous research, creep and shrinkage were assumed to be completely independent random variables. However, because of the common influencing factors in the material models for the creep and shrinkage estimation, strong correlation between creep and shrinkage can be presumed. In this paper, an Monte Carlo Simulation using CEB-FIB creep and shrinkage equations were performed to actually evaluate the correlation coefficient between two phenomena, and then another Monte Carlo Simulation to evaluate the statistical properties of axial strain affected by partially correlated random variables including the material properties, environmental factors, and applied forces. The results of Monte Carlo Simulation were compared with measured strains of a column on a first story in a 58-story building. Comparison indicated that the variation due to the uncertainty related with the material properties were most severe. And measured strains was within the range of mean+standard deviation.

• 전자공학회논문지 IE
• /
• v.45 no.2
• /
• pp.34-39
• /
• 2008

This study established the efficient system that retrieves the 3D model by using a statistical technique called the function of discriminant analysis. This method was suggested to search index, which was formed by the statistics of 128 feature vectors including those scope, minimum value, average, standard deviation, skewness and scale. All of these were sampled with Osada's D2 method and the statistics as a factor effecting a change turned the value of discriminant analytic function into that of index. Through the primary retrieval on the model of query, the class above the top 2% was drawn out by comparing the query with the index of previously saved class from the group of same models. This method was proved an efficient retrieval technique that saved its procedural time. It shortened the retrieval time for 3D model by 57% faster than the existing Osada's method, and the precision that similar models were found in the first place was recorded 0.362, which revealed it more efficient by 44.8%.

• Journal of the Korean Chemical Society
• /
• v.26 no.4
• /
• pp.229-234
• /
• 1982

Using solution technique, sulfur in the sulfide ore was indirectly determined by X-ray fluorescence spectrometry. The sample was dissolved with the mixed solution of B$r_2$ and HN$O_3$, and Si$O_2$, a major constituent, was repelled from the solution by HF treatment several times, B$a^{2+}$ solution was added to the solution to precipitate the S$O^4_{2-}$ ion as BaS$O_4$. Measuring the fluorescent X-ray intensity of excess Ba2+ ion in the filtrate, the content of sulfur in the original ore was back-calculated. Comparing the results by this method with the gravimetric method, the mean difference was ${\pm}1.7%$ in the range of 20 to 40% of sulfur content and the method was tolerably reproducible.

• Journal of the Korea Society of Computer and Information
• /
• v.16 no.1
• /
• pp.53-59
• /
• 2011

In many face recognition applications such as security systems, it is assumed that upright faces are given to the system. In order for the system to be used in more general environments, the system should be able to deal with the rotated faces properly. It is a generally used approach to rotate the face detection window and apply face detector repeatedly to detect a rotated face in the given image. But such an approach requires a lot of computation time. In this paper, a method of extracting the axis of symmetry for a given set of points is proposed. The axis of symmetry for the edge points in the face detection window is extracted in a way that is fast and accurate, and the face detector is applied only for that direction. It is shown that the mean and standard deviation of the symmetry detection error is $0^{\circ}$ and $3^{\circ}$ respectively, for the database used.