• Journal of the Korean Society of Surveying, Geodesy, Photogrammetry and Cartography
• /
• v.20 no.4
• /
• pp.359-366
• /
• 2002

To survey satellites using only GPS can sometimes cause an impossible situation due to the many different geographical conditions as city cannon and obstacles. Although the GLONASS satellite system does not have the ability to survey itself accurately since it currently lacks of the number of usable satellites, it is able to bridge the gap when combined with GPS. This research used the GPS receiver to perform four analyzing methods to bring out the independent surveying method of GPS and combined surveying method of GPS and GLONASS(4 methods - number of satellites able to receive, precision of raw data, standard deviation from known point and RTK surveying). The result of test surveying satellites showed that 11 hours were possible to measure a minimum of 4 satellites when using an independent surveying method and 4 hours in unified surveying method in a month. Also, the precision of raw data using GPS and GLONASS surveying is 0.08~l.8m better than the GPS surveying in standard deviation. The deviation of known points by GPS and GLONASS also showed better accuracy by 3~l1mm. The RTK showed the range of differences in deviation of survey by leaning towards the GPS independent survey in Northing coordinate and leaned towards the Easting coordinate when GPS and GLONASS were combined. Nonetheless, it can't be said that the unified method is better, because it has limits to its capability.

• The Journal of the Korea Contents Association
• /
• v.15 no.11
• /
• pp.410-421
• /
• 2015

The purpose of this study is to review the contents of the legislation(2015.5.12.) for shop key money concretely and to find an effective way in making an improvement of practical protection in the process of tenant's shop key money collection. From this point of view, this study tries to make some legislative suggestions as follows. First of all, the code of conflicting definition between 'shop key money' and 'shop key money contract' in the amended Commercial Building Lease Protection Act need to be harmonized with each other because they are likely to face potential problems in the protection of tenant's shop key money collction as well as risks for confusion. In the second place, it requires to strengthen the protection of tenant's shop key money collection by approval of direct opposing power of shop key money itself on condition that it satisfies a certain prerequisites. In addition, the ambiguous codes related to the landlord's disturbance should be distinctly arranged and the distribution principle of demonstration about landlord's disturbance on tenant's shop key money collection also should be made clear. Finally, the standard level of shop key money by region, business district, and category of business should be set and announced by Ministry of Land and Transport.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.28 no.11C
• /
• pp.1077-1087
• /
• 2003

In this paper, we proposed an architecture of a cryptosystem with various operating modes for the network security and implemented in hardware using the ASIC library. For configuring a cryptosystem, the standard block ciphers such as AES, SEED and 3DES were included. And the implemented cryptosystem can encrypt and decrypt the data in real time through the wired/wireless network with the minimum latency time (minimum 64 clocks, maximum 256 clocks). It can support CTR mode which is widely used recently as well as the conventional block cipher modes such as ECB, CBC and OFB, and operates in the multi-bit mode (64, 128, 192, and 256 bits). The implemented hardware has the expansion possibility for the other algorithms according to the network security protocol such as IPsec and the included ciphering blocks can be operated simultaneously. The self-ciphering mode and various ciphering mode can be supported by the hardware sharing and the programmable data-path. The global operation is programmed by the serial communication port and the operation is decided by the control signals decoded from the instruction by the host. The designed hardware using VHDL was synthesized with Hynix 0.25$\mu\textrm{m}$ CMOS technology and it used the about 100,000 gates. Also we could assure the stable operation in the timing simulation over 100㎒ using NC-verilog.

• KIPS Transactions on Computer and Communication Systems
• /
• v.6 no.3
• /
• pp.105-112
• /
• 2017

PCI Express is a bus technology that connects the processor and the peripheral I/O devices that widely used as an industry standard because it has the characteristics of high-speed, low power. In addition, PCI Express is system interconnect technology such as Ethernet and Infiniband used in high-performance computing and computer cluster. PGAS(partitioned global address space) programming model is often used to implement the one-sided RDMA(remote direct memory access) from multi-host systems, such as computer clusters. In this paper, we design and implement a OpenSHMEM API based on PCI Express maintaining the existing features of OpenSHMEM to implement RDMA based on PCI Express. We perform experiment with implemented OpenSHMEM API through a matrix multiplication example from system which PCs connected with NTB(non-transparent bridge) technology of PCI Express. The PCI Express interconnection network is currently very expensive and is not yet widely available to the general public. Nevertheless, we actually implemented and evaluated a PCI Express based interconnection network on the RDK evaluation board. In addition, we have implemented the OpenSHMEM software stack, which is of great interest recently.

• Journal of Genetic Medicine
• /
• v.8 no.1
• /
• pp.28-34
• /
• 2011

Most clinicians understand clinical trials as the evaluation process for new medicine before their use. However, clinical trials can also be applied to laboratory diagnostic tests (LDTs) to verify diagnostic accuracy and efficacy before their clinical laboratory implementation for patients. The clinical trial of LDT has two distinctive characteristics that are different from the case of pharmaceuticals and thus worth special consideration. One of them is the level of evidence. The well-designed randomized controlled trials (RCTs) are known to provide the best evidence to prove the clinical efficacy of any pharmaceutical products. However, RCTs lose practicality when applied to LDTs due to various issues including ethical complications. For this reason, comparative study format is considered more feasible approach for LDTs. In addition pharmaceuticals and LDTs are different in that the user's intervention is not required for the former but critical to the latter. Moreover, in the case of pharmaceuticals, end-products are produced by manufacturers before being used by clinicians. However, in LDTs, once reagents and instruments are provided by manufacturers, they are first utilized by clinical laboratories to produce test results in order for clinicians to use them later. In other words, when it comes to LDTs, clinical laboratories play the role of manufacturers, providing reliable test results with improved quality assurance. Considering the distinctive characteristics of LDTs, we would like to offer detailed suggestions to successfully perform clinical trials in LDTs, which include analytical performance measures, clinical test performance measures, diagnostic test accuracy measures, clinical effectiveness measures, and post-implementation surveillance.

• The Proceeding of the Korean Institute of Electromagnetic Engineering and Science
• /
• v.5 no.4
• /
• pp.83-93
• /
• 1994

1886년 고트리브 다이믈러와 칼 벤즈가 가솔린 자동차를 개발한 이후 100여년이 지난 지금 자동차는 비약적으로 진보, 발전하여 현대 산업사회와 개인의 생활에 있어 산업운송수단과 이동수단으 로서 필요불가결하게 되어 밀접한 관계를 갖고 있다. 우리나라 자동차 공업의 역사는 자동차가 사회적, 경제적 효용에 따라 그 생산과 보유대수가 날이 갈수록 증가 일로에 있으며, 자동차의 생산대수는 전세 계에서 년간 약 50,606천대('94년)로서 중요한 국가 기간 산업으로 자리하고 있다. 한편 전기, 전자공업의 발전에 따른 자동차의 Car Electronics가 많이 채용되게 됨에 따라 현재의 자 동차에는 대부분이 전자제어 System으로 구성되어 있다. 최근에는 Micro Processor를 이용한 전자부품이 많이 사용되어 전자파에 대한 문제가 다양하게 발생 하고 있다. 예를 들면 미국 캘리포니아주에서 전자점화제어장치와 연료분사 장치를 설치한 구미의 자동 차가 주행중 28MHz, 28W의 아마추어 무선을 탑제한 자동차가 통과할 때 엔진이 고르지 못한 보고가 있 었고, 화학섬유로된 옷을 착용한 전자부품이 다른 부품에 영향을 주는 사례가 맣아지고 있다. 따라서 자동차에는 여러가지의 전장품, 전자기기를 탑재하기 때문에 자동차 자체에서 발생하는 것과 외부로 부터 받는 전자장해 EMI(Electromagnetic Interference), EMS(Electromagnetic Susceptibility) 가 문제로 되어 자동차 및 부품 maker에 의한 EMC(Electromagnetic Compatibility) 평가의 중요성이 고조되고 있다. 차제무전기, 차제무전기, Car-Radio는잡음방해를 많이 받기도 하지만, 잡음원이 되기 도 한다. 또한 Engine 제어, 차속제어, Brake 제어등에 이용되는 전자제품은 방해에 의한 오동작 또는 파괴가 발생하여 주행기능, 안전성에 문제가 야기되지 않도록 해야 한다. 이러한 전자기 환경은 모두 RF(Radio Frequence)와 자동차에서의 전자파 장해 문제의 원이 될 수 있다. 자동차 및 그 부품의 전자기 방해에 관한 규격화는 1987년부터 괄목할 만하게 진행되어 이에 따른 규제 움직임이 IEC(International Electrotechnical Commission: 국제전기기술위원회) 산하의 하부기 구인 CISPR(International Special Committeeon Radio Interference: 국제 무선 장해 특별위원회)가 전자기 방해파에 대한 측정법 통일안을 제안 하였고, ISO(International Standardization Organiza- tion: 국제표준화 기구) 가운데 TC 22/SC3가 자동차의 전장품에 대한 장해를 논의히고 있다. 특히, 자동차의 EMC에 관한 국가 규격은 국제 규격에서 저술한 바와 같이 특별히 규정된 것이 없고 VDE(Verband Deutscher Elektrotechniker: 서독전기기술 협회)와 SAE(Society of Automotive Engi- neers: 자동차 기술자 협회)에서 비교적 활발하고 Jaso(Japanese Automobile Standards Organization: 일본 자동차 표준협회)에서 많이 진행중에 있다. 본 고에서는 자동차의 전자제어에 따른 잡음 발생 요인과 전자파 간섭 관련 자동차 규격과 시험평가 방법에 대해 간단히 소개 하였다.

• Journal of the Korean Institute of Illuminating and Electrical Installation Engineers
• /
• v.12 no.2
• /
• pp.99-107
• /
• 1998

This dissertationhas confirmed the non-flam mability of cast mold transformer that is increasingly used lately. As a research progress, the investigation has been performed on the installation status and each line of the subway system which have the most mold transformer accidents, and the impediment status of the transformer for rectifier and the high-voltage distribution transformer per each manufacturer. Then, a high voltage mold of the actual mold transformer has been installed in the horiwntal heating furnace and the heat has been applied by the standard heating temperature curve of KSF 2257(Fireproof testing meth od of the construction structures: 1993). Accordingly, the combustibility of the mold transformer based on the test results has been found that 78 minutes has been required for the complete burning per the KSF 2257 combustion test curve and that, after stopping the heat application of the horizontal furnace after ignition, the flame progress has not been made but shown as the self-extinguishing characteristics when the flame progress has been checked. Thus, the non-flammability and self-extinguishability of the mold transformer have been confirmed. The result of this dissertation has indicated that the accident involving mold transformer has been progressed and expanded by the dielectric breakdown or void due to the crack in the mold rather than a fire accident caused by a short-circuit or an overload.r an overload.

• Spatial Information Research
• /
• v.12 no.2
• /
• pp.151-163
• /
• 2004

This study aims to develop a standard protocol by which users can exchange data information efficiently between KOSDIC and GIS. The ultimate goal from this study is to propose a data exchange format using KOSIC. The background of this study is that GIS industry sector is vigorously developing linked to spatial information construction such as UIS, LIS, EIS, AM/FM through supporting by regional government institution. According to do, the format of data transformation becomes major issue. GIS data can easily transfer to CAD version but when CAD data convert to GIS format (DWG->DXF->SHP) cannot get high success rate due to errors and problems. In addition, CAD data feature is made from oriental structure which is made of point and line faeture so that GIS system is impossible to data transformation. In the reason, the biggest problem is discordance of symbolization in integration and standard of data format. By investigation the usability of this study, conclusion are drawn efficient alternative plan in data transformation. Though this wort we will be able to provide a better transformation of data conversion between CAD format and GIS format. Accordingly, it is of important to enrich the integrated construction information infrastructure, which accommodates ever-changing constructions environment.

• Proceedings of the Korean Association of Geographic Inforamtion Studies Conference
• /
• 2002.03b
• /
• pp.127-141
• /
• 2002

GIS환경에서 도시모형(urban model)의 적용을 목적으로 사회·경제적 데이터(socio-economic data)를 활용하는 과정은 도시현상이 갖는 복잡성과 변동성으로 인해 하나의 특정시간에서의 상황을 그대로 저장한 형태인 스냅샷 모형(snapshot model)만으로는 효율적인 공간분석의 실행이 불가능하다. 또한 도시모형을 적용하는 과정에서 GIS의 대상이 되는 공간, 속성, 시간의 정의는 분석목적에 따라 다르게 정의되어질 수 있으며 이에 따라 상이한 결과가 도출될 수 있다. 본 연구는 30년 간의 부산시 인구분포의 동적 변화과정 관측을 위해 시간개념을 결합한 Temporal GIS를 구축하고 이를 활용하여 인구밀도모형 및 접근성모형을 적용하는 과정을 통해 보다 효율적이고 다양한 결과를 제시할 수 있는 GIS 활용방안을 제시하고자 하였다. 흔히 공간현상의 계량화와 통계적 기법의 적용을 위한 데이터 처리과정은 많은 오차와 오류를 유발할 수 있다. 이러한 문제의 해결을 위해서는 우선적으로 분석목적에 맞는 데이터의 정의(Data Definition), 적용하고자 하는 모형(Model)의 유용성 검증, 적절한 분석단위의 설정, 결과해석의 객관적 접근 등이 요구된다. 이와 더불어 변동성 파악을 위한 시계열 자료의 효율적 처리를 위한 방법론이 마련되어져야 한다. 즉, GIS환경에서의 도시모형의 적용에 따른 효율성과 효과성의 극대화를 위해서는 분석목적에 맞는 데이터모델의 설정과 공간DB의 구축방법이 이루어져야 하며 분석가능한 데이터의 유형에 대한 충분한 고려와 적용과정에서 분석결과에 중대한 영향을 미칠 수 있는 요소들을 미리 검증하여 결정하는 순환적 의사결정과정이 필요하다., 표준패턴을 음표와 비음표의 두개의 그룹으로 나누어 인식함으로써 DP 매칭의 처리 속도를 개선시켰고, 국소적인 변형이 있는 패턴과 특징의 수가 다른 패턴의 경우에도 좋은 인식률을 얻었다.r interferon alfa concentrated solution can be established according to the monograph of EP suggesting the revision of Minimum requirements for biological productss of e-procurement, e-placement, e-payment are also investigated.. monocytogenes, E. coli 및 S. enteritidis에 대한 키토산의 최소저해농도는 각각 0.1461 mg/mL, 0.2419 mg/mL, 0.0980 mg/mL 및 0.0490 mg/mL로 측정되었다. 또한 2%(v/v) 초산 자체의 최소저해농도를 측정한 결과, B. cereus, L. mosocytogenes, E. eoli에 대해서는 control과 비교시 유의적인 항균효과는 나타나지 않았다. 반면에 S. enteritidis의 경우는 배양시간 4시간까지는 항균활성을 나타내었지만, 8시간 이후부터는 S. enteritidis의 성장이 control 보다 높아져 배양시간 20시간에서는 control 보다 약 2배 이상 균주의 성장을 촉진시켰다.차에 따른 개별화 학습을 가능하게 할 뿐만 아니라 능동적인 참여를 유도하여 학습효율을 높일 수 있을 것으로 기대된다.향은 패션마케팅의 정의와 적용범위를 축소시킬 수 있는 위험을 내재한 것으로 보여진다. 그런가 하면, 많이 다루어진 주제라

• Korean Journal of Weed Science
• /
• v.7 no.1
• /
• pp.98-106
• /
• 1987

The effect of carbofuran (2, 3-Dihydro-2,2-dimethyl-benzofuran-7-ylmethyl carbamate) on rice growth was evaluated as a direct growth stimulant of rice. For this, several laboratory and field trials conducted from 1981 to 1986 at the Yeongnam Crop Experiment Station. Carbofuran solution affected the germination of rice seed. The growth of seminal roots was adversely affected by the increase of carbofuran concentrations while the length of single root became longer with the concentration increment up to 50 ppm. Carbofuran application (0.18g ai/$m^2$) at the rice nurserybed significantly enhanced the rice growth and recovered from the Low temperature damage. The enhancement effect was more pronounced at the plot that applied carbofuran before rice seeding as soil incorporation than top-dressing. The effect of growth enhancement further extended to transplanted lowland rice. This effect was greater at double cropping area (late of June transplanting) compared to single cropping area (May transplanting). Among important agronomic traits, the increment of panicle number was the most important direct effect for increasing rice grain yield by carbofuran application. Carbofuran application also exhibited the reducing effect against low temperature damage at reductive division stage and at rice heading stage and against submergence damage at booting stage through enhancement of fertile grain ratio, ripening ratio or photosynthetic activity.