• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2016.10a
• /
• pp.896-899
• /
• 2016

Server management and power management are important to operate a data center stably and efficiently. By this paper, we introduce an web based application that is able to monitor and visualize energy consumption, help to energy consumption analysis of a data center due to provide server monitoring information such as temperatures for server, status of each device, power status using server management interfaces and power management modules in data center, also suggest the methods to implement them. This application takes advantage of IPMI which is server management standard interfaces and server management technology in manufacturer's individual way so it can do integrated monitoring for heterogeneous severs, and there is little monitoring load inside of server system because it doesn't need to install agent program for monitoring target system, and it can be used successfully to energy consumption analysis, server management in a data center due to realtime provided energy consumption and monitoring information.

• Journal of the Korea Institute of Information Security & Cryptology
• /
• v.20 no.5
• /
• pp.89-98
• /
• 2010

Wireless LAN (WLAN) is type of wireless service that has higher data transmission than current cellular networks. The usage is continually increasing. There are a lot of vulnerabilities in wireless network, due to the properties of the wireless environment, regardless of its popularity. IEEE announced the 802.11i security standard to solve these problems. The vulnerable point of messages used in the process of key distribution for 802.11i makes the target node attacked lose memory through continuous messages and blocks the legitimate WLAN service. In this paper, we proposed new schemes to solve this problem and compared our proposals with the current process. The proposed protocol eliminates the memory exhaustion problem on the client side by using methods for reduction of memory usage.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2023.05a
• /
• pp.71-71
• /
• 2023

국가물관리기본법에 의거하여 통합물관리 정책에 부합하는 농어촌용수 계획 및 관리를 위해 유역 및 용수구역 단위의 농업용수 공급 및 수요 분석이 요구되고 있다. 현재 농업용수는 개수로 방식 용수공급체계 및 수문 직접조작에 의한 용수배분체계로 공급량 대비 사용량의 비율이 48%에 불과하다. 또한, 농경지 상류와 하류의 공급량 차이가 크게 발생하며, 경지면적 감소가 공급 필요량 감소로 연결되지 않는다. 농업용수의 경우 기존 국가유역수자원 모델 (K-WEAP, MODISM)을 통한 물수지 분석시 순물소모량 개념의 회귀수량 산정으로 공급량과 회귀량의 왜곡이 발생하고 있으며, 이에 따른 공급량 왜곡, 유역내 복잡하고 다양한 농업용수 공급체계를 하나의 가상저수지로 단순화함으로서 유역내 들녘별 농업용수 과부족 분석 불가능, 하천과 저수지 공급 우선순위 현장과 불일치 등 농어촌용수구역의 특성 및 실제 현장을 반영하는데 한계가 있다. 본 연구에서는 기존 물수지 분석 모델을 개선하기 위한 농업용수 유역 물수지 분석 모델의 방법론을 제시하고 시범지역 적용을 통한 검증 및 적용성을 평가하고자 한다. 경기 안서 농촌용수구역을 대상으로 농어촌공사 및 지자체 관리 저수지, 양수장, 취입보, 관정 등 총 106개 개별 시설물 자료를 구축하였으며, 39개 지구로 세분화하였다. 한국농어촌공사의 계측 공급량 기반 수요량 및 개별 시설물에 대한 물수지 분석 후 지구 단위, 소유역 단위, 표준유역 단위의 상하류 및 시설물을 연계한 유역 물수지 모델을 제시하고자 한다.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2022.05a
• /
• pp.513-513
• /
• 2022

국가물관리기본법에 의거하여 통합물관리 정책에 부합하는 농어촌용수 계획 및 관리 요구에 따른 유역 및 용수구역 단위의 물관리 필요하며, 국가수자원계획의 물수급 정책 수립시 농업용수의 공급, 이용 및 관리 특성 고려되어야 한다. 현재 농업용수는 개수로 방식 용수공급체계 및 수문 직접조작에 의한 용수배분체계로 공급량 대비 사용량(벼의 생육에 사용된 수량)의 비율이 48%에 불과하고, 농경지 상류와 하류의 공급량 차이가 크게 발생하며, 경지면적 감소가 공급 필요량 감소로 연결되지 않는다. 현재 국가유역수자원모델 (K-WEAP, K-MODSIM)은 모델이 가진 분석 능력의 한계로 인하여 농업용수 물수급 해석에 왜곡이 발생하기 때문에, 농업용수 특성이 반영된 농업용수 수요·공급 표준화 모형이 필요하다. 본 연구에서는 기존 유역물수지모델 현황 및 농업용수 적용의 한계점을 파악하고, 농업용수의 공급 및 이용을 고려한 유역 물수지 모형 개발을 목표로 한다. 기존 농업용수 물수지 분석은 순물소모량 개념 적용에 따른 회귀수량 획일화와 이에 따른 공급량 왜곡, 유역내 복잡하고 다양한 농업용수 공급체계를 하나의 가상저수지로 단순화 함으로서 유역내 들녘별 농업용수 과부족 분석 불가능, 하천과 저수지 공급 우선순위 현장과 불일치, 노후된 기초자료 등의 한계가 존재하며, 이를 위한 개선방안을 도출하고자 한다. 또한, 농업용수 회귀수량의 경우 실측기반의 회귀수량 산정 방법을 제시하고자 하며, 단일 수원공 및 복합 수원공의농업용수 물수지 분석 방법을 개발하고자 한다. 본 연구의 목적은 농업용수 물수급 특성이 국가수자원계획에 반영할 수 있도록 기본 수자원모델(K-MODSIM)과 연계가능한 농업용수 표준 모형개발로써, 향후 국가수자원계획(국가물관리기본계획, 전국하천유역수자원관리계획, 농어촌용수이용 합리화계획 등) 수립에 반영될 수 있을 것으로 판단된다.

• Journal of the Institute of Electronics Engineers of Korea SD
• /
• v.48 no.1
• /
• pp.22-30
• /
• 2011

In this paper, we propose a memory efficient multi-rate Low Density Parity Check (LDPC) decoder for China Mobile Multimedia Broadcasting (CMMB). We find the best trade-off between the performance and the circuit area by designing a partially parallel decoder which is capable of passing multiple messages in parallel. By designing an efficient address generation unit (AGU) with an index matrix, we could reduce both the amount of memory requirement and the complexity of computation. The proposed regular LDPC decoder was designed in Verilog HDL and was synthesized by Synopsys' Design Compiler using Chartered $0.18{\mu}m$ CMOS cell library. The synthesized design has the gate size of 455K (in NAND2). For the two code rates supported by CMMB, the rate-1/2 decoder has a throughput of 14.32 Mbps, and the rate-3/4 decoder has a throughput of 26.97 Mbps. Compared with a conventional LDPC for CMMB, our proposed design requires only 0.39% of the memory.

• Clean Technology
• /
• v.23 no.1
• /
• pp.73-79
• /
• 2017

Recently usage of biomass is increased in pulverized coal power plants for reduction of $CO_2$ emission. Many problems arise when thermal share of the biomass is increased, and milling of the biomasses is one of the most important problems due to their low grindability when existing coal pulverizer is used. Grindability of coal can be measured through the HGI (Hardgrove grindability index) equipment as a standard, but method of measuring biomass grindability has not been established yet. In this study, grinding experiment of coal and biomass was performed using a lab-scale ball mill. One type of coal (Adaro coal) and six biomasses (wood pellet (WP), empty fruit bunch (EFB), palm kernel shell (PKS), walnut shell (WS), torrefied wood chip (TBC) and torrefied wood pellet (TWP)) were used in the experiment. Particle size distributions of the fuels were measured after being milled in various pulverization times. Pulverization characteristics were evaluated by portion of particles under the diameter of $75{\mu}m$. As a result, about 70% of the TBC and TWP were observed to be pulverized to sizes of under $75{\mu}m$, which implies that they can be used as alternative biomass fuels without modification of the existing mill. Other biomass was observed to have low grindability compared with torrefied biomass. Power consumption of the mill for various fuels was measured as well, and the results show that lower power was consumed for torrefied biomasses. This result can be used for characterization of biomass as an alternative fuel for pulverized coal power plants.

• Journal of the Korea institute for structural maintenance and inspection
• /
• v.18 no.4
• /
• pp.41-49
• /
• 2014

In this study, experimental research was carried out to evaluate the structural performance of the reinforced concrete beam using hybrid retrofitting with two materials (groove and embedding FRP rod, CFRP sheet) in existing reinforced concrete buildings. Seven reinforced concrete beams, retrofitted groove and embedding FRP rod (NER series) and groove and embedding FRP rod with CFRP sheet (NERL series), and standard specimen (NBS) were constructed and tested under monotonic loading. Design parameters of test specimens are the amount of groove and embedding FRP rod and lapping CFRP sheet. Test results showed that the maximum load carrying capacity of specimens with groove and embedding FRP rod and groove and embedding FRP rod with CFRP sheet (NERL series) were increased the by 12~46% and 22~77% respectively in comparison with the standard specimen NBS. Test specimens NER series were failed with the adhesion slip and concrete cover separation. And test specimens NERL series were failed with the adhesion slip due to the confining effect of lapping CFRP sheet.

• Analytical Science and Technology
• /
• v.36 no.6
• /
• pp.291-299
• /
• 2023

The benzo[a]pyrene in edible oils is extracted using methods such as Liquid-liquid, soxhlet and ultrasound-assisted extraction. However these extraction methods have significant drawbacks, such as long extraction time and large amount of solvent usage. To overcome these drawbacks, this study attempted to improve the current complex benzo[a]pyrene analysis method by applying the QuEChERS (Quick, Easy, Cheap, Effective, Rugged and Safe) method that can be analyzed in a simple and short time. The QuEChERS method applied in this study includes extraction of benzo[a]pyrene into n-hexane saturated acetonitrile and n-hexane. After extraction and distribution using magnesium sulfate and sodium chloride, benzo[a]pyrene is analyzed by liquid chromatography with fluorescence detector (LC/FLR). As a result of method validation of the new method, the limit of detection (LOD) and quantification (LOQ) were 0.02 ㎍/kg and 0.05 ㎍/kg, respectively. The calibration curves were constructed using five levels (0.1~10 ㎍/kg) and coefficient (R²) was above 0.99. Mean recovery ratio was ranged from 74.5 to 79.3 % with a relative standard deviation (RSD) between 0.52 to 1.58 %. The accuracy and precision were 72.6~79.4 % and 0.14~7.20 %, respectively. All results satisfied the criteria ranges requested in the Food Safety Evaluation Department guidelines (2016) and AOAC official method of analysis (2023). Therefore, the analysis method presented in this study was a relatively simple pretreatment method compared to the existing analysis method, which reduced the analysis time and solvent use to 92 % and 96 %, respectively.

• Journal of Korean Society of Environmental Engineers
• /
• v.39 no.9
• /
• pp.527-533
• /
• 2017

Environmental concern about smart phone is growing because it has short product life span while having intensive production technology and cost. In this study environmental impact of the smart phone is quantified using the LCA methodology based on the ISO 14040 series standards. The assessment considers potential environmental impacts across the whole life cycle of the smart phone including; pre-manufacturing; manufacturing; distribution; product use; and end-of-life stages. The pre-manufacturing stage is the most dominant life cycle stage causing the highest environmental impacts among all 10 impact categories assessed. The global warming impacts of the smart phone in the pre-manufacturing, distribution, use, manufacturing, and end-of-life stages were 52.6% 23.9%, 15.7%, 7.0%, and 0.8%, respectively. Sensitivity of the life cycle impact assessment results to the system boundary definition and assumptions made were quite high. Three components of the smart phone, PCB, battery, and display module were identified as the key components causing majority of the potential environmental impact in the pre-manufacturing stage. As such the slim and light-weight design and the use of environmental friendly materials are important design factors for reducing the environmental impact of the smart phone.

• Journal of the Korean Chemical Society
• /
• v.39 no.3
• /
• pp.204-212
• /
• 1995

The graphite furnace atomic absorption spectrophotometric determination of trace lead in water samples was studied using matrix modifiers. In order to modify the sample matrix, the type and optimum amount of the modifier were investigated with a given concentration of Pb solution. In fact, if the matrix is not modified, lead has low ashing and atomization temperatures as to give a low absorbance with bad reproducibility because of its volatility. Therefore, optimum modifiers should be used to stabilize the atomization. In this work, the ashing and atomization temperatures were raised from 400 and $1800^{\circ}C$, to 1,000 and $2000^{\circ}C$, by the addition of palladium to 50 ng/mL lead solution as a modifier. The concentration of palladium was 5.0 ${\mu}g/mL$ in the modified solution. Furthermore, if 1.5 ${\mu}g/mL$ of aluminum was mixed with the palladium modifier as an auxiliary modifier, the ashing temperature could be increased $150^{\circ}C$ additionally. With such a treatment, the sensitivity was improved more than 5 times of the solution unmodified and the reproducible results of less than 5% RSD were obtained in the samples of university's waste water and pipe-washing tap water. It could be concluded that this procedure was quantitative in the determination of trace lead from the recoveries of more than 88% obtained in the samples in which a given amount of lead was spiked.