• The Journal of Natural Sciences
• /
• v.10 no.1
• /
• pp.93-102
• /
• 1998

In order to study on the bleaching efficiency of flex fabrics, ozone which has been produced by an ozone generator, has been contacted with flex fabrics in water at various conditions. The equipments used for the ozone reatment of flex fabrics were the ozone generator and a liquor/ozone contactor. For the study of the bleaching efficiency on flex fabrics, the Hunter's whiteness, tensile strength, microscopic properties of the ozone treated flex fabrics were measured. The concentration of generated ozone was increased, as the voltage increase, flow ratio decrease and oxygen amount increase. The bleaching efficiency of ozone treated fabrics was increased with increasing the net concentration of ozone. The whiteness ozone of treated fabrics was found to be best when treated temperature was $0-15^{\circ}C$ and treated time was 20 min. The tensile strength of treated fabrics decreased as the treating time increased, and as the temperature raised.

• Analytical Science and Technology
• /
• v.12 no.4
• /
• pp.318-325
• /
• 1999

Sludges from the wastewater of hanji production were analysed to see that sludges from the bleaching process, the bleach washing process, and the paper preparation process were fibrous, while sludges from the process cooking with NaOH and the process of final chemical and microbiological treatment were non-fibrous. Sludge solution from the bleaching process had the most amount of solid matters. Sludges from the bleaching process, the bleach washing process, and the final chemical and microbiological treatment process contained about 80-90 %(w/w) moisture. Owing to hypochlorite ion, pH of sludge from the bleaching process was higher than any other sludge samples. The inorganic components of sludges were determined by ICP-AES. The major inorganic component of sludge from the process cooking with NaOH was Na, while the sludge from the bleaching process had Na and Ca, major components in the final chemical and microbiological treatment process were Ca and Al. Trace amount of Mg, Fe, K, P, Mn and Ti were observed in sludges. Sludge from the bleaching process had ashes more than any other sludges. Shape of sludges observed by SEM was appeared to fibrous or crystalline, and the breadth of fibrous sludge was $5{\sim}50{\mu}m$. The sludge from the bleaching process had the most amount of matters soluble by cold and hot water and by alcohol-benzene.

• Proceedings of the Korean Society for Emotion and Sensibility Conference
• /
• 2004.11a
• /
• pp.34-34
• /
• 2004

• Analytical Science and Technology
• /
• v.14 no.3
• /
• pp.266-273
• /
• 2001

One pulp manufacture facility was selected as surveying facilities to examine the discharged rate and generation mechanism of dioxin in bleaching stag wastewater. The analytical method was established in the wastewater and the sample was collected and analyzed. The outlet concentration of bleaching stage was increased 5 times for 2,3,7,8-TCDF and 7 times for OCDD, and the discharged ratio between PCDFs and PCDDs was surveyed about 2:3. The 2,3,7,8-TCDF and 2,3,7,8-TCDD were mainly detected in acid wastewater of bleaching stage that is known as the typical discharged patterns of chlorine bleaching stage.

• Journal of the Korean Society of Clothing and Textiles
• /
• v.18 no.1
• /
• pp.15-22
• /
• 1994

The formation of carbonyl group was dominant to other functional groups. Concentrations of both carboxyl and peroxide groups were found to rapidly reach low steady state values that increased slightly with increa-sing temperature and relatice humidity. Since the deg-radation of cellulose samples was in the initial stage and the conversion of glycosidic bonds and hydroxyl groups were very small, it was found that changes in the physical and chemical properties could be fitted to a first-order reaction model.

• Analytical Science and Technology
• /
• v.11 no.1
• /
• pp.13-19
• /
• 1998

In the dye sensitization for the solar energy conversion with a photoelectrochemical cell containing allylthiourea, the time profile of the sensitized photocurrent showed a rise and fall with the irradiation time. The dye solution before and after irradiation was analyzed by means of spectroscopic methods. A new precipitation reaction between sensitizer and supersensitizer and photobleaching of the dye appeared to be involved in the decreased photocurrent.

• Analytical Science and Technology
• /
• v.14 no.5
• /
• pp.422-431
• /
• 2001

One pulp manufacture facility was selected as surveying facility to examine the discharged amount and generation mechanism of dioxins excepts for bleaching stage wastewater. In recovery and finishing process, 2,3,7,8-TCDF, OCDD and OCDF were mainly detected, and the ratio of PCDDs and 1,2,3,4,7,8-HxCDD as the concentration of 2,3,7,8-substitute isomer were discharged which is known as the typical emission pattern of pulp and paper manufacture facility, and the 1,2,3,7,8-PeCDD and 1,2,3,4,7,8-HxCDD were discharged more than 90% in toxic equivalent concentration. Also, the OCDD and 2,3,7,8-TCDF for 2,3,7,8-isomer concentration, and 1,2,3,7,8-PeCDD and 2,3,7,8-TCDF as toxic equivalent concentration were discharged in effluent. The detected PCDDs/PCDFs concentration were surveyed 0.2266 ng-TEQ/L for influent and 0.0377 ng-TEQ/L for effluent.

• Resources Recycling
• /
• v.18 no.2
• /
• pp.16-29
• /
• 2009

This paper describes characteristics of pollutants in wastewater from the pulp and paper industry and biological technologies for the wastewater treatment. The wastewater from the pulp and paper industry contains high concentrations of biochemical oxygen demand (BOD) and chemical oxygen demand (COD) and shows high toxicity and strong black-brown color. In particular, organic chlorinated compounds such as dioxins and furans may be formed by the chlorination of lignin in wood chips. Thus the pulp and paper industry is recently trending toward total chlorine-free (TCF) bleaching processes. All biological technologies for pulp and paper wastewater treatment are based on the contact between wastewater and bacteria, which feed on organic materials in the wastewater, thus they reduce BOD concentration in it. Both aerobic and anaerobic treatments were found to be effective for the wastewater treatment. Furthermore, advanced technologies such as fungal application and combined biological-filtration process have been also introduced to the wastewater treatment field. These technologies would be useful for water recycling to reduce water consumption throughout pulp and paper making process.

• Journal of Ginseng Research
• /
• v.23 no.1 s.53
• /
• pp.1-7
• /
• 1999

Photosynthetic rates and leaf bleaching were measured under light of far-red, red, orange, green, blue and white in order to clarify the effect of light qualities on photosynthesis in Panax species, P. ginseng and P. quinquefolium. Photosynthetic rate of P. ginseng and P. quinquifolium showed higher in the order under the light of red > orange > blue > white > green. Degree of leaf bleaching in P. quinquifolium showed severer in the order under the light of far-red > red > white > blue > orange > green. These suggest that shading material with blue or orange color is good for ginseng growth. As for the effect of temperature, the photosynthesis was increased with increasing temperature untill $25^{\circ}C$ and thereafter decreased. Therefore, it was clarified that the optimum temperature for photosynthesis of P. ginseng and P. quinquefolium was $25^{\circ}C$. And the dark respiration rate of ginseng leaf also increased with increasing air temperature. Especially, the dark respiration rate increased by $80\%$ for P. ginseng and by $73\%$ for P.quinquefolium at above $30^{\circ}C$ as compared with $25^{\circ}C$. In general, the photosynthesis rate was higher in P. quinquifolium than in P. ginseng and ranged from 3.54 to 4.04 mg $(CO_2{\cdot}dm^{-2}{\cdot}hr^{-1})$ for P. quinquefolium and from 2.08 to 2.59 mg$(CO_2{\cdot}dm^{-2}{\cdot}hr^{-1})$ for P. ginseng.