오존을 이용한 마직물의 표백성 향상에 관한 연구

A Study on the Development of Bleaching efficiency for flex fabrics by Using Ozone Treatment

  • 이문수 (배재대학교 자연과학대학 의류학부) ;
  • 송경헌 (배재대학교 자연과학대학 의류학부) ;
  • 김경아 (배재대학교 자연과학대학 의류학부) ;
  • 송봉근 (한국화학연구소 화학소재연구단) ;
  • 이래연 (충남대학교 공과대학 섬유공학과)
  • Lee, Mun-Soo (Dept. of Clothing and Texiles, Pai-Chai University) ;
  • Song, Kyong-Hun (Dept. of Clothing and Texiles, Pai-Chai University) ;
  • Kim, Gyoung-A (Dept. of Clothing and Texiles, Pai-Chai University) ;
  • Song, Bong-Keun (Advanced materials div., Korea Research Institute of Chemical Technology) ;
  • Lee, Rae-Yohn (Dept. of Textile Eng., College of Eng., Chung Nam University)
  • 발행 : 1998.02.25

초록

오존을 이용한 마직물의 표백효과를 연구하기 위하여 오존 발생 장치에 의해서 생성된 오존을 물에 용존시킨 오존처리액으로 마직물을 처리하였다. 마직물의 오존처리를 위하여 오존 발생기와 오존 용존조를 사용하였고, 표백 효과를 측정하기 위하여 오존으로 처리된 마직물을 Hunter의 백도, 인장강도, SEM사진을 측정하였다. 발생 오존의 농도는 전압이 높을수록, 원료 산소가스의 유량이 적을수록 증가하였다. 처리포의 표백효과는 오존의 순수 농도가 증가함에 따라 증가하였다. 처리포의 백색도는 처리온도가 $0-15^{\circ}C$, 처리시간이 20분일 때가 최적의 상태를 나타내었다. 처리포의 인장강도는 처리시간이 길수록, 온도를 높여줌에 따라 저하하였다.

In order to study on the bleaching efficiency of flex fabrics, ozone which has been produced by an ozone generator, has been contacted with flex fabrics in water at various conditions. The equipments used for the ozone reatment of flex fabrics were the ozone generator and a liquor/ozone contactor. For the study of the bleaching efficiency on flex fabrics, the Hunter's whiteness, tensile strength, microscopic properties of the ozone treated flex fabrics were measured. The concentration of generated ozone was increased, as the voltage increase, flow ratio decrease and oxygen amount increase. The bleaching efficiency of ozone treated fabrics was increased with increasing the net concentration of ozone. The whiteness ozone of treated fabrics was found to be best when treated temperature was $0-15^{\circ}C$ and treated time was 20 min. The tensile strength of treated fabrics decreased as the treating time increased, and as the temperature raised.

키워드