• Applied Chemistry for Engineering
• /
• v.23 no.1
• /
• pp.71-76
• /
• 2012

Biofouling by marine organisms such as algae and barnacles causes lots of significant problems in marine systems such as a rise of the maintenance-repair cost for the ship and the marine structures. In this work, a fluoropolymer, perfluoropolyether (PFPE), was applied as an anti-biofouling coating material that prevents the adhesion of marine organisms and facilitates the removal of them. Water contact angles of various surfaces were tested to examine the hydrophobicity of the PFPE-modified surface. The PFPE-modified surface showed the water contact angle of $64.5^{\circ}$ which is a remarkable rise from $46.7^{\circ}$ of amine-treated surface. When the substrate was treated with PFPE, the adhesion on the of the barnacle and other marine organisms were repressed around 15% by the enhanced hydrophobicity. In addition, the removal the of the adhered marine organisms were better comparing to that of the surface prepared by PDMS. Surfaces of the substrate treated by PFPE were characterized through physical and chemical methods to analyze the biofouling results. Degree of biomolecular adhesion to the substrate was quantified by the measurement the fluorescence intensity of marine organisms dyed with green fluorescence. PFPE is expected to be applicable not only to anti-biofouling systems but also to medical devices where the prevention of protein adhesion is required.

• Journal of KIISE:Computer Systems and Theory
• /
• v.32 no.10
• /
• pp.520-529
• /
• 2005

A feature-based 3D modeling algorithm is presented in this paper. Since conventional methods use depth-based techniques, they need much time for the image matching to extract depth information. Even feature-based methods have less computation load than that of depth-based ones, the calculation of modeling error about whole pixels within a triangle is needed in feature-based algorithms. It also increase the computation time. Therefore, the proposed algorithm consists of three phases, which are an initial 3D model generation, model evaluation, and model refinement phases, in order to acquire an efficient 3D model. Intensity gradients and incremental Delaunay triangulation are used in the Initial model generation. In this phase, a morphological edge operator is adopted for a fast edge filtering, and the incremental Delaunay triangulation is modified to decrease the computation time by avoiding the calculation errors of whole pixels and selecting a vertex at the near of the centroid within the previous triangle. After the model generation, sparse vertices are matched, then the faces are evaluated with the size, approximation error, and disparity fluctuation of the face in evaluation stage. Thereafter, the faces which have a large error are selectively refined into smaller faces. Experimental results showed that the proposed algorithm could acquire an adaptive model with less modeling errors for both smooth and abrupt areas and could remarkably reduce the model acquisition time.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2013.02a
• /
• pp.445-445
• /
• 2013

유기태양전지는 간단한 제조공정, 낮은 제조단가, 가벼운 무게 및 우수한 유연성의 장점을 가지고 있기 때문에 모바일 기기의 응용에 많은 관심을 가지고 있다. 그러나 이종접합 유기태양전지의 광전 변환효율이 낮기 때문에 유기태양전지를 상용화하기 위해서는 광전변환 효율을 높이기 위한 연구가 필요하다. 본 연구에서는 태양전지의 광전 변환효율을 증진하기 위하여 열처리 시간 변화에 따른 이종접합 유기 태양전지의 특성에 미치는 효과를 조사하였다. 전자 주게 물질인 P3HT와 전자 받게 물질인 PCBM 물질을 특정용매에 녹여 패턴화된 ITO를 코팅한 glass 기판 위에 스핀 코팅 방법을 이용하여 glass/ITO/PEDOT:PSS/P3HT:PCBM/Al 구조를 가진 이종접합 유기태양전지를 제작하였다. UV-Vis 분광학, X-선 광전자 분광학 및 원자힘 현미경 측정을 하여 제작한 소자의 광학적 및 구조적 특성을 분석하였다. 이종접합 유기태양전지의 우수한 광흡수율과 평탄한 표면을 가지는 최적화 조건을 열처리 시간에 따라 비교 분석하였다. 제작한 소자들을 열처리를 하지 않은 소자와 다양한 시간 동안 열처리를 한 소자의 특성을 비교하였다. 제작한 이종접합 태양전지의 전류-전압 측정 결과를 분석하여 최대의 광전 변환효율을 가지는 최적의 열처리 조건을 결정하였다. 열처리를 할 경우 열처리를 하지 않은 소자보다 광전 변환효율이 증가함을 알 수 있었다.

• Journal of Sensor Science and Technology
• /
• v.8 no.2
• /
• pp.184-188
• /
• 1999

PbTe thin films of high quality were deposited on HF-treated Si(100) substrates at various substrate temperature by pulsed laser deposition technique. XRD patterns showed that PbTe layers were well-crystallized to a cubic phase with (h00) preferred orientation with the substrate temperature up to $300^{\circ}C$. PbTe films could not form at substrate temperature above $400^{\circ}C$ because of reevaporation of the Pb. According to AFM image, the surface of films was composed of small granular crystals and flat matrix. According to the increase of substrate temperature, the grain size at film surface becomes larger. By Hall-effect measurement, the carrier concentration and Hall mobility of n-type PbTe films grown by $T_{sub}=300^{\circ}C$ were $3.68{\times}10^{18}cm^{-3}$ and $148\;cm^2/Vs$, respectively.

• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.20 no.6
• /
• pp.101-107
• /
• 2020

Road surface measurement is an essential process for quantifying the degree and displacement of roughness in road surface management. For safer road surface management and quick maintenance, it is important to accurately measure the road surface while mounted on a vehicle. In this paper, we propose a sophisticated road surface measurement system that can be measured on a moving vehicle. The proposed road surface measurement system supports more accurate measurement of the road surface by using a high-performance line laser sensor. It is also possible to measure the transverse and longitudinal profile by matching the position information acquired from the RTK, and the velocity adaptive update algorithm allows a manager to monitor in a real-time manner. In order to evaluate the proposed system, the Gocator laser sensor, MRP module, and NVIDIA Xavier processor were mounted on a test mobile and tested on the road surface. Our evaluation results demonstrate that our system measures accurate profile base on the MSE. Our proposed system can be used not only for evaluating the condition of roads but also for evaluating the impact of adjacent excavation.

• Journal of the Korean Geosynthetics Society
• /
• v.18 no.4
• /
• pp.273-286
• /
• 2019

A derelict bridge called WoljungGyo was restored in Gyeongju, the capital city of ancient Silla. WoljungGyo was originally built in 760AD, and later rebuilt in 1280AD during the Goryeo Kingdom. The bridge lasted in working condition for at least 520 years. The bridge was uncovered to the remains of both abutments and four piers, with only one or two steps remaining. One of the foundation for piers showed evidence of partial settlement. The cause of the partial settlement is important for the successful restoration of the bridge so that an extensive investigation was carried out, which includes layer stratification by boring, 2-D stiffness profiling by surface-wave tests, and large scaled-plate load test for evaluating capacity. In addition to the field studies in the Woljunggyo bridge, 3-D finite element analysis was also conducted. Based on the results of the site investigation and the numerical analysis, it was concluded that the further ground improvement to build the piers was not necessary so that the gravels were placed and leveled underneath the existing pier stones to compensate partial settlement before the restoration.

• Journal of the Korean Geotechnical Society
• /
• v.37 no.3
• /
• pp.31-41
• /
• 2021

A dozer is a construction machinery used to move soil mass along large open tracts of land. Soil thrust generated on the soil-track interface determines the performance of the dozer; to improve the tractive performance of the dozer, the outer surface of the continuous-track is designed to protrude with grousers. In this study, we calculated soil thrust of the dozer equipped with grousers with various shape ratios, and evaluated the optimal grouser shape ratio considering ground conditions. Grouser generated additional soil thrust on the side of the continuous-track (e.g., side soil thrust) and converted the shearing surface (e.g., from soil-track interface to soil-soil interface), increasing the soil thrust of dozer by about 1.3 to 1.6 times. The effect of grouser's shape ratio on the soil thrust of dozer differed with the relative density of the ground. As the shape ratios of grouser increased, soil thrust of dozer decreased at the relative density of 40% and increased at the relative density of 80%. Based on these results, it can be concluded that the shape ratio of grouser severely affects the dozer's performance; thus, careful consideration of the optimal shape ratio of grouser is of great importance in the mechanical design, evaluation, and optimization of the undercarriage of dozers.

• 한국해양학회지
• /
• v.20 no.3
• /
• pp.6-19
• /
• 1985

Hydrographic data and daily time series of longshore wind, sea level and sea surface temperature were used in order to explain why the upwelling effect in SST is especially prominent near Ulgi-Gampo although the sea level records along the whole southeast coast show a nearly uniform upwelling-downwelling response to wind. Regional difference in intensity of the wind-induced upwelling represented by the SST decrease is attributed to the combined influence of two factors; one is the baroclinic tilting of isotherms due to the East Korea Warm Current (EKWC) near the Ulgi-Gampo coast, the other is the topographic effects around the southeast coast. Baroclinic tilting effect of EKWC which is generally strongest near the coast of Ulgi to Gampo results in both of the shoaling of cold water and the westward trapping of the coldest bottom water over the shallower shelf rather than the deepest troough region off that coast regardless of the season. Therefore, becacse of the cold water ready for upwelling at the subsurface layer, SST responds very rapidly to the upwelling-favorable winds of summer only off the Ulgi-Gampo coast. Spreading isobaths from Pusan to Gempo can reinforce the upwelling of the cold bottom water and its westward trapping.

• Journal of the Korean Magnetics Society
• /
• v.3 no.2
• /
• pp.87-93
• /
• 1993

Iron nitride (Fe-N) magnetic thin films were deposited using a DC magnetron sputtering system. Microstructures and magnetic properties were examined as a function of deposition power and nitrogen gas input ratio. The nitrogen content in the film was found to be the major factor determining the microstructure and the magnetic properties. The films deposited at low nitrogen input ratios have an $\alpha$-Fe structure of which the lattice is expanded due to the nitrogen atoms incorporated at the interstitial sites. As the nitrogen content in the film increases, the degree of lat-tice expansion increases and the value of saturation magnetization decreases linearly. The films with a high degree of lattice expansion give very low values of coercivity, which is attributed to the disturbance of colunmar growth and the decrease of surface roughness. Further increase in the nitrogen input ratio causes the phase transfonnation from $\alpha$-Fe to $Fe_{2-3}N$, resulting in the marked reduction in the saturation magnetization. The phase transformation occurs when, regardless of deposition conditions, the nitrogen content reaches at 15 at.% and the lattice is expanded by 5%.

• Korean Journal of Materials Research
• /
• v.4 no.1
• /
• pp.81-89
• /
• 1994

Ti film of lOnm thickness and Co film of 18nm thickness were sequentially e-heam evaporated onto Si (100) substrates. Metal deposited samples were rapidly thermal-annt.aled(KTA) in thr N1 en vironment a t $900^{\circ}C$ for 20 sec. to induce the reversal of metal bilayer, so that $CoSi_{2}$ thin films could be formed. The sheet resistance measured by the 4-point probe was 3.9 $\Omega /\square$This valur was maintained with increase in annealing time upto 150 seconds, showing high thermal stab~lity. Thc XRII spectra idrn tified the silicide film formed on the Si substrate as a $CoSi_{2}$ epitaxial layer. The SKM microgr;iphs showed smooth surface, and the cross-sectional TKM pictures revealed that the layer formed on the Si substrate were composed of two Co-Ti-Si alloy layers and 70nm thick $CoSi_{2}$ epl-layer. The AES analysis indicated that the native oxide on Si subs~rate was removed by TI ar the beginning of the RTA, and Ihcn that Co diffused to clean surface of Si substrate so that epitaxial $CoSi_{2}$ film could bt, formed. In thc rasp of KTA at $700^{\circ}C$. 20sec. followed by $900^{\circ}C$, 20sec., the thin film showed lower sheet resistance, but rough surface and interface owing to $CoSi_{2}$ crystal growth. The application scheme of this $CoSi_{2}$ epilayer to VLSI devices and the thermodynarnic/kinetic mechan~sms of the $CoSi_{2}$ epi-layer formation through the reversal of Co/Ti bdayer were discussed.