• Restorative Dentistry and Endodontics
• /
• v.30 no.5
• /
• pp.355-362
• /
• 2005

The purpose of this study was to compare the effect on marginal leakage of a resin surface sealant (Biscover) applied before or after polymerization of composite resin to unsealed composite restorations. Thirty Class V cavities with the occlusal margin in enamel and cervical margin in dentin or cementum were prepared on the buccal surfaces of sound extracted molars and restored with a microfilled light-cured composite resin (Micronew). Restorations were randomly assigned into one of three equal groups (n = 10): a control group - no surface sealing, group 1 - applied Biscover after polymerization of the composite resin. and group 2 - applied Biscover before polymerization of the composite resin. Specimens were thermocycled, immersed in a $20\%$ methylene blue solution for 4 hoots, sectioned longitudinally, and analyzed for leakage at the occlusal and gingival margins. The results of this study were as follows 1. In sealed group, group 2 showed higher microleakage than group 1 at both occlusal and gingival margins. but there was no significant difference between two groups (p > 0.05). 2. Unsealed control group showed a little higher microleakage than sealed group at occlusal margins, and a little Higher or similar microleakage than sealed group at gingival margins (p > 0.05) 3. Control group and group 2 showed significantly less microleakage at the occlusal margins, but group 1 showed no significantly difference between microleakage at the occlusal and gingival margins.

• The Korean Journal of Zoology
• /
• v.25 no.1
• /
• pp.9-28
• /
• 1982

Cyclical changes in the fine structures of the surface epithelial, stroma and glandular cells of guinea pig endometrium during the estrous cycle were studied by transmission and scanning electron microscopy. Cytochemical studies were made in order to investigate the ultrastructural localization of the acid phosphatase, alkaline phosphatase and ATPase in these cells. The results obtained are as follows: 1. The endometrial surface epithelium was pseudostratified columnar during estrus and meterstrus, and simple columnar during proestrus and diestrus. The characteristic features observed in these cells include increased nucleocytoplasmic ratio at proestrus, elongated shapes of both the nucleus and the entire cell, increased volume of the cytoplasm and cytoplasmic bulding into the lumen during estrus, and smaller surface epithelial cells during metestrus. 2. In the cytoplasm of surface epithelial cells, the numbers of mitochondria and free ribosomes were increased, and rough endoplasmic reticulum and Golgi complex appeared during estrus, and the degenerated cells, lipid droplets, multilamellated bodies and lysosomes appeared during diestrus. 3. During estrus, scanning electron microscopic observations of endometrial surface showed a regular arrangement with polygonal outlines of epithelial cells, distinct intercellular border, and bulged surface into the lumen, whereas flat surface and indistinct cell border were characteristic during meterstrus and diestrus. 4. Microvilli which aligned on the surface were longer and most abundant during estrus while short and aparse during other phases. 5. Cytochemical studies indicated that during metestrus acid phosphatase activities were localized in the microvilli and vacuoles, and alkaline phosphatase activities were significant around luminal surface and lateral cell membrane in the surface epithelial cells. ATPase activities were present on the microvilli and cell membrane during proestrus and estrus.

• Korean Journal of Materials Research
• /
• v.2 no.3
• /
• pp.213-219
• /
• 1992

The microstructure, dopant distribution and electrical properties of the $As^{+}$ ion-implanted surface layer differ significantly depending on the methods of subsequent heat treatments, furnace annealing(FA) and rapid thermal annealing(RTA). The amorphous layer created by ion implantation was recrystallized during the thermal annealing through solid phase epitaxial (SPE) growth. The dopant distribution and electrical properties are discussed with respect to the TEM cross-sectional microstructure observed. The microstructure, dopant distribution and electrical properties depended upon especially the annealing time of the heat treatment.

• Journal of Advanced Marine Engineering and Technology
• /
• v.36 no.1
• /
• pp.78-84
• /
• 2012

Mold may experience deterioration of molding quality as the abrasion of mold occurring due to friction between mold and molded product works as allowance in the course of press process. Therefore, to improve the wear-resistance of mold, methods like nitriding, carburizing, flame and induction surface hardening treatment etc have been applied. However, as such methods are accompanied by problems like shape limitation or product deformation etc, laser surface treatment technology is under review as surface treatment method that can solve such problems. Therefore, in this study, mold material cast iron was surface-treated by using high power diode laser. In previous report 1 and report 2, the heat treatment characteristics were compared by the differences of die materials and shapes, then this paper observed microstructure by using optical microscope and scanning electronic microscope to analyze the structural difference of hardened zone, interface area and base metal after heat treatment. And the structural condition was grasped through EDS. As a result of microstructure, hardened zone showed formation of acicular martensite.

• Proceedings of the Korean Institute of Surface Engineering Conference
• /
• 2015.11a
• /
• pp.211-212
• /
• 2015

이번 실험에서는 건식 도금방법을 이용한 알루미늄 도금강판의 조성 및 두께에 따른 내식성 평가를 염수분무 실험을 통해 측정하였다. 실험 결과 도금 조성 내 Silicon의 조성이 증가할수록, 일반적인 건식도금 방법보다 조직 성장 시 도금 층에 각을 주어 도금하는 것이 내식성을 향상시키는 것으로 관찰되었다.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2009.04b
• /
• pp.9-11
• /
• 2009

열전박막은 유비쿼터스 센서 네트워크에서 사용될 초소형 자가발전 장치로 각광받고 있다. 본 실험에서 는 상온에서 주로 사용되는 $BiSbTe_3$ 열전물질을 유기 금속화학 증착법(MOCVD)을 이용하여 (0001) Sapphire기판 위에 성장하였다. 일반적으로 사용되는 기판의 세척 및 에칭과정을 거쳐 성장된 $BiSbTe_3$ 박막의 표면형상은 부분적으로 성장되지 않으며 불규칙한 결정립을 포함하는 박막의 형상을 나타내었으나 성장 전 기판의 표면처리 통하여 성장된 박막의 표면 형상을 크게 개선시킬 수 있었다. 이는 표면처리를 통하여 기판표면에 미세 결함을 형성 시켜 초기 박막성장 시 핵생성이 용이하도록 하였기 때문으로 해석되었다. 이러한 표면 처리기법은 성장된 박막의 열전 특성에 크게 영향을 끼치지 않았다. 따라서 다양하고 저가의 박막형 열전소자의 제작에 응용될 수 있을 것으로 기대된다.

• Journal of Life Science
• /
• v.30 no.8
• /
• pp.722-730
• /
• 2020

As one of the most serious health risk factors, air pollution can no longer be ignored. Particulate matter (PM) is an important and harmful component of air pollution that originates from a variety of sources. Numerous recent studies have linked PM to a range of conditions including cancer, cardiovascular, respiratory, and skin disease. The eye, despite being directly exposed to air pollution, has been investigated in very few of these studies. In this review, we describe the evidence from in vitro and in vivo studies, as well as epidemiological investigations, that supports the association between exposure to PM and the development of ocular conditions such as surface and retinal disease and glaucoma. Based on the results of previous studies, we suggest that PM exposure can lead to oxidative stress, inflammation, autophagy, and, ultimately, ocular surface disease. Nevertheless, almost no studies focus on ocular surface damage from PM while some epidemiological and clinical studies report on the posterior of the eye. However, the underlying pathological mechanisms in the posterior following PM exposure have yet to be identified, and further studies are therefore warranted of the ocular surface as well as the posterior part of the eye.

• Proceedings of the Korean Institute of Surface Engineering Conference
• /
• 2013.05a
• /
• pp.88-91
• /
• 2013

현재 활용되고 있는 침탄질화기술과 QT + 저온 플라즈마 침질탄화 기술로 소재의 표면특성을 향상시켜 상대적인 비교를 위해 미세조직, 경도, XRD, GDS 및 Wear Test를 실시하였다. 비교결과 확산층에서의 경도는 침탄처리한 시편이 상대적으로 높았지만, 표면경도 및 Wear Test의 경우 QT+플라즈마 침질탄화처리한 시편이 더 좋은 결과를 보였다.

• Journal of dental hygiene science
• /
• v.10 no.4
• /
• pp.295-300
• /
• 2010

The aim of this study were to elucidate effects of fluoridated bleaching agents and post-treatment fluoride application on the color and microhardness of enamel surface. Twenty freshly extracted human adult molar were each sectioned into halves, the specimens divided and treated according to four experimental groups: 1, untreated controls: 2, treatment with 10% carbamide peroxide (CP) bleaching agent; 3, treatment with 10% CP containing 0.11% fluoride; 4, treatment with 10% CP followed by a 0.9% sodium fluoride gel application. Group 2-4 were compared with the baseline data. treated 8 h per day for 14 days then immersed in distilled water for 2 weeks. Changes in enamel color and microhardness were evaluated on Days 7 and 14. All the bleached enamel specimens revealed increased whiteness and overall color value. Groups 2 and 4 showed significantly decreased enamel microhardness compared to their baseline. The specimens treated with fluoridated bleaching agents showed relatively less reduction in enamel microhardness than those treated with nonfluoridated agents during the bleaching treatment. The addition of fluoride did not impede the tooth whitening. The fluoridated bleaching agents reduced the microhardness loss of enamel.

• Journal of Korea Foundry Society
• /
• v.41 no.3
• /
• pp.241-251
• /
• 2021

7000-series aluminum alloys are noted for their superior strength compared with other Al alloys, and their billets are generally fabricated by direct-chill (DC) casting. Surface defects in a DC-cast aluminum billet are mainly related to exudation and the meniscus freezing phenomenon, which are influenced by alloy compositions, casting speed, and casting temperature. 7000-series aluminum alloys have a wide freezing range during solidification, which makes it easy for casting defects to occur. In this study, we investigated surface defect evolution in casting billets of Al-8Zn-2Mg-2Cu alloy fabricated by a DC casting process. The billets showed "wavy" or "dotted" surfaces. The wavy surface was formed by meniscus freezing at a lower casting speed (200 mm/min) and temperature (655 ℃). In the wavy surface, refined dendritic cells were observed in a concave region due to the constitutional supercooling caused by meniscus freezing. Meanwhile, at a higher casting temperature (675 ℃), the dotted surface was formed by pore formation. In the dotted surfaces in the billet formed at a high casting speed (230 mm/min), an exudation layer was formed by the high metallostatic head pressure. The dotted region and the smooth region had a refined dendritic morphology and a columnar morphology at the exudation layer, respectively. This is attributed to the formation of gas pores in the dotted region.