• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• v.9 no.2
• /
• pp.913-916
• /
• 2005

In this study, an additional microstrip patch with a comb-pattern slot is positioned on the conventional single layer microstrip patch antenna. Numerical results of the antenna bandwidth and the antenna gain are increased compared with those of the conventional single layer microstrip patch antenna.

• The Korean Journal of Mycology
• /
• v.38 no.1
• /
• pp.69-74
• /
• 2010

The 2 strains of Pleurotus ostreatus showing very severe and mild symptom of brown blotch were selected, and their F1 hybrid strains were made by mating of their single spore isolates. Hydrophobicity of fruiting body surface and brown blotch severity of the parental and their 11 F1 hybrid strains showing different level of severity of brown blotch were determined. Correlation coefficient (R) between disease severity and hydrophobicity were 0.68 and 0.70 on two independent experiments. Correlation coefficient between disease severity and disease incidence that was determined in the oyster mushroom farm were 0.46 and 0.52 on two independent experiments. When GFP-tagged Pseudomonas tolaasii was monitored with confocal microscope on cap surface of fruiting body, more cells of the pathogen were clustered on the severe strain than the mild strain, which indicates that the bacterial pathogen proliferates more on the severe strain. These results suggest that hydrophobicity of oyster mushroom fruiting body affects disease severity of the brown blotch disease; the longer the bacterial suspension stays on fruiting body surface more severe symptom of the blotch develops.

• The Journal of the Acoustical Society of Korea
• /
• v.19 no.2
• /
• pp.33-39
• /
• 2000

We have studied to obtain the frequency characteristics of the Surface Acoustic Wave(SAW) bandpass filter, having low shape factor, it's interdigital transducer(IDT) was formed on the 35° Y-cut X-propagation Quartz substrate and was evaporated by Aluminium. And then, we performed computer-simulation by a simulator. And, we can design that the apodization weighted type IDT as an input transducer of the filter and the withdrawal weighted type IDT as an output transducer of the filter from the results of our computer-simulation. Also, we have employed that the number of pairs of the input and output IDT are 2200 pairs and 1000pairs, respectively and used the Kaiser-Bessel window function in order to minimize the effect of ripple. And, while the width and the space of IDT's finger are 6㎛ m and 5.75㎛, respectively and we could obtain the resonable results when the IDT thickness was 6000Å in consideration of the ratio of SAW's wavelength, and IDT aperture is 2mm. Frequency response of the fabricated SAW bandpass filter has the property that the center frequency is about 70MHz, shape factor is less than 1.3, bandwidth at the 1.5dB is probably 1.3MHz, out-band attenuation is almost -45dB, insertion loss is 19dB and ripple in the width of bandpass is 1dB approximately. Therefore, these frequency characteristics of the fabricated SAW bandpass filter are agreed well with the designed values.

• Journal of Conservation Science
• /
• v.35 no.5
• /
• pp.440-452
• /
• 2019

This research has analyzed SI, the traditional steel, and SIHS(SI + HS), SICS(SI + CS), and SINiS(SI + NiS), the materials that were produced through welding and reprocessing three modern steel- HS, CS, and NiS- that have different carbon content. The purpose of the analyzation was to improve the definition of the multi-layered pattern that appears in the forging process. In observing modified structures on the commissures of three modern steel that have different carbon component to the SI, SINiS produced the most significant multi-layered pattern as well as the excellent welding quality. The excellent welding quality was due to the content of nickel which helped the forge welding process with other materials. There was no significant difference in crystal grain per materials, and SICS showed the highest hardness. At the measurement of EPMA for commissures of the materials, SINiS showed the highest definition of the multi-layered pattern due to the nickel and carbon content. The results above showed that the carbon steel with nickel content is the best material for the most definite multi-layered pattern, expressed from the multi-layered structure which is a characteristic of traditional forge welding technology. It is expected that the result of this research can be utilized as the technical data in further researches regarding the relics excavated from ancient welding process and their multi-layered structure and patterns.

• Journal of Plant Biology
• /
• v.37 no.2
• /
• pp.203-221
• /
• 1994

Pollen grains of 19 taxa belonging to 12 genera in 5.families of the Korean gymnosperms were investigated by LM, SEM and TEM, and their morphological characters were described and palynological keys were made for each family. From the taxonomic viewpoint, palynological characters are very available to intergeneric and intrageneric classifications since their distinctive differences in pollen shape, size, condition of surface, sculpture pattern and presence of air bladders and projection except for the intrageneric classification of the genus Pinus since the overlapped characters such as pollen size and sculpture pattern. Pollen grains of Picea koraiensis in the family Pinaceae are distinguished from thc genera Pinus and Abies for the reasons that shape of air bladders are irregular, air bladders are bigger than pollen body, and pollen wall is thin. Compared with the genera Abies and Pinus that have air bladders, Picea koraiensis is closely related to Abies in that pollen body wall become gradually thin from pole of proximal face to air bladder, surface of pollen body is not rough, and pollen size is similar to that of the genus Abies. The presence of ektexine and enexine in proximal face, and the connections of the former to air bladder wall and the latter to distal face were elucidated by the investigation of pollen grains with air bladders through TEM. Endexine of the families of Taxaceae, Taxodiaceae and Cupressaceae was also obse-rved as a pile of laminae. From the observation by SEM, sculpture pattern of air bladder was foveolate with fine pits on surface. Sculpture pattern of air bladder is reticulate under LM, but observed by TEM, it resulted from the transmission of netted structure in air bladder.

• Korean Journal Plant Pathology
• /
• v.3 no.4
• /
• pp.285-290
• /
• 1987

Septoria brown spot caused by Septoria glycines Hemmi is one of the serious fungal diseases in soybean. Since little has been known about the disease progress in the field, the present study was conducted to determine the factors affecting the disease progress in the soybean plant. Disease severity and pattern of the progress of the Septoria brown spot were different with varieties. Susceptibility of soybean plants increased with increase of plant age and leaf maturity in order from the primary leaf to the newly expanded leaf. It seemed to be related with conidial germination on the leaves. Germination and germtube elongation were more inhibited by the diffusates obtained from upper leaves than those from lower leaves and they were higher in a susceptible variety than in a moderately resistant one.

• Applied Microscopy
• /
• v.36 no.3
• /
• pp.195-208
• /
• 2006

Using light and scanning electron microscopy morphological studies of pollens were conducted to determine the sectional boundary and the relationships among eight species of section Zygophyllidium and its five related species of subg. Poinsettia. Pollen characters of 13 species were described, and their diagnostic keys were presented here. Based on the sculpturing patterns and the results of numerical analysis using 10 pollen characters 13 species were divided into four Pollen types: type I, having micro-reticulate shaped pollen (E. hexagona, E. lagunensis, E. hexagonoides and E. bilobata), type II, having reticulate shaped pollen (E. delicatula, E. extipulata, E. dentata, E. heterophylla, E. pulcherrima and E. cyathophora), type III, micro-reticulate shaped pollen with platten muri (E. lacera), and type IV, haying foveolate shaped pollen grains (E. chersonesa and E. eriantha). The results of pollen morphological studies suggest that the sect. Zygophyllidium should be delimited based on only four species, E. hexagona, E. lagunensis, E. hexagonoides and E. bilobata, E. delicatural and E. exstipulata of sect. Zygophyllidium must be transferred to subg. Poinsettia based on pollen morphology. E. eriantha and E. chersonesa having forveolate sculpturing pattern of pollen grains seem to be closely related with species from subg. Agaloma, and additional studies of these species are needed to determine the species relationships within Agaloma group.

• Journal of the Korean Society for Precision Engineering
• /
• v.22 no.2
• /
• pp.202-209
• /
• 2005

A new effective thick-layered RP process, Transfer-type Variable Lamination Manufacturing using expandable polystyrene foam (VLM-ST) has been developed with thick layers and sloped surfaces. VLM-ST has the innate advantages by virtue of its working principle: high building speed, low cost for introduction and maintenance of VLM-ST apparatus, little staircase surface irregularities of parts. Despite these advantages in VLM-ST, the surface roughness of VLM-ST parts is still inadequate to be used as RP master patterns for rapid tooling (RT). This paper describes the systematic and effective methodology to remove the laminated pattern and improve the surface roughness for VLM-ST parts. From the results of surface finishing of VLM-ST parts, it can be seen that the laminated pattern is completely removed and the surface characteristics such as surface roughness, surface hardness, and paintability are improved.

• Korean Journal of Plant Resources
• /
• v.33 no.2
• /
• pp.116-129
• /
• 2020

The genus Sedum comprises about 400 taxa with worldwide distribution, and about 20 taxa of the genus Phedimus distributed from Asia to Europe. According to some taxonomists, Phedimus and Sedum are two separate genera of the family Crassulaceae; however, in Korea Phedimus has been treated as a subgenus Aizoon within the genus Sedum. This ambiguous taxonomic treatment of the genus Phedimus needs further confirmation. In the study, we investigated morphological characteristics such as the whole plant height, leaf morphology, and seed coat features of these two genera. We believe that these characters are very important to distinguish Phedimus and Sedum. The result indicated that the seed surface pattern was the most useful diagnostic character. The Sedum had a hexagonal pattern with a single nipple protrusion, whereas the Phedimus had a rectangular pattern with papilla on both ends. The results of this study strongly support the separation of Phedimus from Sedum and thus Phedimus need to be treated as an independent genus.

• Proceedings of the Korean Society of Dyers and Finishers Conference
• /
• 2011.03a
• /
• pp.84-84
• /
• 2011

국내 섬유산업은 해외로부터의 저가 섬유제품이 대량으로 유입되는 속에서도 산업전반에 꾸준히 고부가 가치화를 지향하고 있다. 소비자의 요구에 부응하여 섬유소재에도 다양한 신개념과 이를 충족시킬 수 있는 기술이 요구되고 있으며, 그 가운데 하나의 영역을 구축해 나가고 있는 분야가 면 리플가공과 같은 표면 형태 가공이며, 최근 들어 폴리에스테르 입체(3D)가공제의 개발 및 가공 방법도 이런 흐름에 부응하여 업계에서 절실한 개발을 요구하고 있는 분야 중 하나이다. 현재 까지 폴리에스테르 섬유의 입체가공 기술은 엠보싱무늬를 조각한 금속 롤러에 열을 가하여 폴리에스터 직물에 찍는 방법으로 원단 표면의 입체적인 무늬를 만들어 내는 방법이 대부분이다. 최근 면 리플가공과 같은 표면 형태 가공이 섬유소재의 새로운 트랜드로 나타나면서 폴리에스테르와 같은 합성섬유에서도 이러한 소재의 질감을 얻고자 많은 시도가 이루어지고 있다. 본 연구에서는 5종의 폴리에스테르의 입체가공용 바인더를 포뮬레이션하여 현재 시장성이 있는 폴리에스테르 아이템 5종에 대한 입체가공효과 및 적용성을 고찰하였다. 합성 포뮬레이션 된 바인더는 수용성으로 만들어졌으며, 입체가공 전 후의 원단 외관, 처리 후 수세의 용이성 및 무늬의 입체성효과 등을 확인하였으며, 가공 전후의 원단 물성평가 연구도 동시 진행하였다. 폴리에스테르 섬유의 새로운 패션 소재로의 응용에 초점을 두고 시장의 수요가 폭발되고 있는 폴리에스테르 섬유 및 나일론 등 합성섬유의 3차원 입체 가공(디보싱) 제품을 생산할 수 있는 가공제 및 가공방법의 개발은 신규시장 창출에 큰 기여를 할 수 있을 것으로 판단되며, 다양한 날염업체의 수요를 충족시키고, 섬유산업의 글로벌화에 대응하여 훈련된 영업 인력과 E-commerce를 통한 외산 제품과의 경쟁력 확보로 신규시장 진입기회를 창출할 것으로 기대한다.