• Journal of the Korea Concrete Institute
• /
• v.21 no.4
• /
• pp.531-537
• /
• 2009

In this study alkali reactivity of crushed stone was conducted according to the ASTM C 227 that is traditional mortar bar test, and C 1260 that is accelerated mortar bar test method. The morphology and chemical composition of products formed in mortar bar, 3 years after the mortar bar tests had been performed, were examined using scanning electron microscopy (SEM) with secondary electron imaging (SEI) and electron probe microanalysis (EPMA) with backscattered electron imaging (BSEI). The crushed stone used in this study was not identified as being reactive by ASTM C 227. However, mortar bars exceeded the limit for deleterious expansion in accelerated mortar bar test used KOH solution. The result of SEM (SEI) analysis, after the ASTM C 227 mortar bar test, confirmed that there were no reactive products and evidence of reaction between aggregate particles and cement paste. However, mortar bars exposed to alkali solution (KOH) indicated that crystallized products having rosette morphology were observed in the interior wall of pores. EPMA results of mortar bar by ASTM C 227 indicated that white dots were observed on the surface of particles and these products were identified as Al-ASR gels. It can be considered that the mortar bar by ASTM C 227 started to appear sign of alkali-silica reaction in normal condition. EPMA results of the mortar bar by ASTM C 1260 showed the gel accumulated in the pores and diffused in to the cement matrix through cracks, and gel in the pores were found to be richer in calcium compared to gel in cracks within aggregate particles. In this experimental study, damages to mortar bars due to alkali-silica reaction (ASR) were observed. Due to the increasing needs of crushed stones, it is considered that specifications and guidelines to prevent ASR in new concrete should be developed.

• The Journal of Korean Academy of Prosthodontics
• /
• v.52 no.2
• /
• pp.105-112
• /
• 2014

Purpose: The aim of present investigation was to find out the influence of several times iatrogenic mobilization in the initial stage of implant installation on bone-implant osteointegration. Materials and methods: The experimental implants (3.75 mm in diameter, 8.0 mm in length) were made of commercially pure (Grade IV) titanium, and were treated with RBM ($MegaGen^{(R)}$: Ca-P) on lower 4.0 mm part. Only lower part of implant was inserted to bone and the implants were nonsubmerged. The 130 implants (two in each tibia) were inserted into the monocortical tibias of 33 rabbits which each weighed more than 3.5 kg (Female, New Zealand White). According to the removal torque interval, the groups were divided into 13 groups, group I (1 day), group II (1 day + 2 days), group III (1 day + 2 days + 3 days), group IV (1 day + 2 days + 3 days + 4 days), group V (2 days), group VI (2 days + 4 days), group VII (2 days + 4 days + 6 days), group VIII (2 days + 4 days + 6 days + 8 days), group IX (4 days), group X (4 days + 7 days), group XI (4 days + 7 days + 10 days), group XII (4 days + 7 days + 10 days + 14 days) and control group. In the control group, the removal torque was measured at 8 weeks with a digital torque gauge (Mark-10, USA). In the experimental groups, the removal torque was given once, twice, three times or four times by experiment design before the final removal torque and the value was measured each time. The implants were then screwed back to their original positions. All the experimental groups were given a final healing time of 8 weeks after placement, in which values were compared with the control groups and the 1st, 2nd, 3rd or 4th removal torque values in each experimental group. Results: In comparison of the final removal torque tests among experimental groups, the removal torque value of experimental groups except group XII were not statistically different that of control group. And the values of group I and II were significantly higher than the values of group VI, VIII, X, XI, and XII. In addition, the values of group III, IV, and V were significantly higher than group XI and XII. In comparison of the removal torque in the each experimental group, the final removal torque were significantly higher in all groups except group VIII, X, XI, and XII. Conclusion: If sufficient healing time was allowed, a few mobilization of fixture at the very early stage after the implant placement in the rabbits didn't interrupt the final bone to implant osseointegration.

• Journal of the korean academy of Pediatric Dentistry
• /
• v.30 no.1
• /
• pp.54-60
• /
• 2003

This study evaluated the influence of chemomechanical caries removal agent $Carisolv^{TM}$(MediTeam, Sweden) for composite resin adhesion to sound human permanent and primary dentin. The buccal/labial surfaces of 80 permanent molars and 80 primary incisors were used. Four types of adhesives and one composite resin were used; AQ Bond(Sun Medical, Japan), Clearfil SE Bond(Kuraray, Japan), Single Bond(3M, USA), Scotchbond Multi-Purpose(3M, USA) and Z100(3M, USA). One drop of $Carisolv^{TM}$(MediTeam, Sweden) was pretreated on the dentin for 0 second(control) and 60 seconds. The specimens were thermocycled for 1,000 times in baths kept 5 degrees C and 55 degrees C with a 30 seconds dwell time. Shear bond strengths were tested and the data was statistically analyzed using one-way ANOVA with subsequent post hoc Scheffe test at p<0.05. $Carisolv^{TM}$ treatment significantly decreased the shear bond strength. Shear bond strength of permanent dentin was significantly higher than that of primary dentin. Clearfil SE Bond treatment groups showed the highest shear bond strength and AQ Bond treatment groups showed the lowest shear bond strength.

• Korean Journal of Environmental Agriculture
• /
• v.37 no.1
• /
• pp.15-20
• /
• 2018

BACKGROUND: The global mean surface temperature change for the period of 2016~2035 relative to 1986~2005 is similar for the four representative concentration pathway (RCP)'s and will likely be in the range of $0.3^{\circ}C$ to $0.7^{\circ}C$. Climate change inducing higher temperature could affect not only crop growth and yield, but also dynamics of carbon in paddy field. METHODS AND RESULTS: This study was conducted to evaluate the effect of elevated temperature on the carbon dynamics in paddy soil and rice growth. In order to control the elevated temperatures, the experiments were set up as the small scale rectangular open top chambers (OTCs) of $1m(width){\times}1m(depth){\times}1m(height)$ (Type 1), $1 m(W){\times}1m(D){\times}1.2m(H)$ (Type 2), and $1m(W){\times}1m(D){\times}1.4m(H)$ (Type 3). The average temperatures of Type 1, Type 2, and Type 3 from July 15 to October 30 were higher than the ambient temperatures at $0.4^{\circ}C$, $0.5^{\circ}C$, and $0.9^{\circ}C$, respectively. For the experiment, Wagner's pots (1/2,000 area) were placed inside chambers. The pots were filled with loamy soil, and chemical fertilizer and organic compost were applied as recommended after soil test. The pots were flooded with agricultural water and rice (Shindongjin-byeo) was planted. It was observed that TOC (total organic carbon) of the water increased by the elevated temperatures and the trend continued until the late growth stage of the rice. Soil TOC contents were reduced by the elevated temperatures. C/N ratios of the rice plant decreased by the elevated temperature treatments. Thus, it was assumed that the elevated temperatures induced to decompose soil organic matter. Elevated temperatures significantly increased the culm length (P<0.01) and culm weight (P<0.05) of rice, but the number and weight of rice panicle did not showed significant differences. CONCLUSION: Based on the results, it was suggested that the elevated temperatures had an effect on changes of soil and water carbons under the possible future climate change environment.

• The Sea:JOURNAL OF THE KOREAN SOCIETY OF OCEANOGRAPHY
• /
• v.17 no.2
• /
• pp.112-119
• /
• 2012

This study investigated the diel and tidal distributions of the two mysids, Archaeomysis kokuboi and Acanthomysis nakazatoi, in relation to their growth stages in the sandy surf zone of Yongil Bay, located on the southeastern part of Korean Peninsula. Sampling was conducted with a sledge net at every two hours for almost 24 hours at three sites: water edge, water surface and sand bottom both in 1-m deep water areas. The abundance of Archaeomysis kokuboi juveniles was too low to count both in day and night samples. While there was no difference in immature A. kokuboi abundance between day and night in the bottom or water edge, that at the water surface was significantly higher at night than daytime. The abundance of A. kokuboi adults, especially of males, in the bottom was significantly higher in daytime than night and no individuals appeared to the water surface either day or night. In comparison, the abundance of Acanthomysis nakazatoi juveniles between day and night did not differ significantly at all the three sites, with the highest number being distributed in the bottom. The abundance of immatures between day and night also did not differ significantly and no individuals appeared to the water surface either day or night. The abundance of A. nakazatoi adults, especially females, in the bottom was significantly higher at night than daytime and there was no significant difference in abundance between day and night in the other sites. There was also no significant difference in abundances of the two species between ebb and flood tides, except for A. kokuboi immatures which appeared significantly more during the ebb tides at the water surface. Overall, the distribution of the two sympatric species, A. kokuboi and A. nakazatoi, was not the same in the sandy surf zone. Its difference seems to depend on their stages of growth, and the change in their abundance may be influenced more by diurnal rhythms than tidal effects. The population density of A. nakazatoi in the sandy surf zone was much higher than that of A. kokuboi, and relatively higher densities in all growth stages of the former were found in the sandy bottom ranging from juveniles to adults. These results indicate that A. nakazatoi has exceedingly better ability of sand burrowing even from the juvenile stage, and thus is an ecologically better adapted species in the sandy surf zone than another sympatric species, A. kokuboi.

• Journal of the Korean Society of Food Science and Nutrition
• /
• v.43 no.5
• /
• pp.720-728
• /
• 2014

In order to characterize the quality of Doenjang, fermented Korean soybean paste, subjected to long-term aging, this study performed physico-chemical analyses and sensory evaluation according to aging period (from 1 to 9 years). Regarding the proximate composition of Doenjang according to aging period, moisture, crude protein, crude lipid, crude ash, and salt contents showed little differences among Doenjang samples. Amino-type nitrogen content was 1,046.7 mg% in the 1 year-aged sample, 990.9~996.9 mg% in the 2~5 year-aged samples, and 1,214.1~1,304.8 mg% in the samples fermented more than 5 years. ${\Delta}$E value, reflecting total color differences between the samples, increased according to aging period. Ratios of linoleic and linolenic acids, which are essential fatty acids in soybeans, constituted 55% of total fatty acids, which was the most abundant among all fatty acids. The major free sugar in Doenjang was fructose at a content of 1.6~2.2% in 1~9 year-aged Doenjang. Glycoside form of isoflavones in Meju constituted 77.1%, and the aglycon form constituted 22.9%. However, the glycoside type of isoflavones in soybeans was converted to aglycon type in Doenjang through fermentation and aging. In the sensory evaluation of Doenjang samples, brown color, salt smell, soy sauce flavor, and viscosity all increased according to aging period, whereas sweet flavor, roast smell, beany flavor, salty taste, and acrid taste showed no significant differences. In cluster analysis of the sensory attributes of Doenjang according to aging period, 1 year-aged Doenjang was significantly different between 2 year- and 3~5 year-aged Doenjang.

• Korean Journal of Fisheries and Aquatic Sciences
• /
• v.33 no.6
• /
• pp.533-540
• /
• 2000

Gonadal development, gametogenesis, reproductive cycle, gonad index, flesh weight rate, and first sexual maturity of the turban shell, Lunella coronata coreensis were investigated by histological observation. The materials used were collected monthly from the rocky intertidal zone of Daehang-ri, Buan-gun, Jeollabuk-do, on the west coast of Korea, from July 1998 to June 1999. Sex of L coronata coreensis was separate. The gonad was widely located in the spirals of the visceral mass buried in the digestive gland. The ovary and testis were composed of a number of oogenic follicles and speymatogenic follicles, respectively. Monthly variations in the gonad index increased from March ($23.86{\pm}3.73$) when the water temperature increased and reached the maximun in July ($49.76{\pm}6.47$). And then, the gonad index sharply decreased in September ($15.58{\pm}2.33$). The flesh weight rate ranged from $25.2{\%}$ to $32.3{\%}$, and its variation showed a similar pattern to the gonad index. Individuals $<5.9 mm$ in shell height could not take part in reproduction in both sexes. Percentages of first sexual maturity of female and male specimens ranging from $7.0{\~}7.9 mm$ in shell heights were $84.6{\%}\;and\;91.7{\%}$, respectively, and $100{\%}$ in those over 8.0 mm in shell height in both sexes took part in reproduction. By studying the monthly changes of the morphological features and sizes of germ cells during gametogenesis in the gonad, the reproductive cycle of this species could be devided into five successive stages: early active (December to April), late active (January to July), ripe (May to August), spawning (July to September), and recovery (September to March). The spawning period of this species was once a year between July and September, and the main spawning occurred in July when the seawater temperature reached above $24.8^{\circ}C$. The fully ripe eggs were $150{\~}160\;{\mu}m$ in diameter.

• Korean Journal of Fisheries and Aquatic Sciences
• /
• v.33 no.6
• /
• pp.529-532
• /
• 2000

To establish a food safety of dried layer, heat treatment effect on the bacterial density of dried layers was investigated. And a modified process developing experiment for dried layer products using closing type drying oven was carried out. tittle bacterial density difference on the dried layer products were found before and after heat treatment at $90^{\circ}C$ for 6 hrs called Hwaip treatment having been used for long term storage. Direct or indirect heat treatment of dried lavers using gas burner and frying pan reduced about 1 to 3 log cycle of viable cell count from $10^8\;CFU/g\;to\;10^5\;CFU/g$. Heat treatment by direct surface contact type cooking machine being used in the market place for cooked dried layer products could reduce the viable cell count on the layer product from $2.2{\times}10^5{\~}5.2{\times}10^7\;CFU/g\;to\;7.0{\times}10^2{\~}5.0{\times}10^5\;CFU/g$, Ultraviolet irradiation (20 W, 30 cm) to one or both side of the dried laver products reduced the viable cell count from $2.2{\times}10^6\;CFU/g\;to\;8.0{\times}10^5\;CFU/g\;and\;2.0{\times}10^5\;CFU/g$, respectively. The viable cell count of the dried layer products produced by modified process using a closing type dryer was about $10^3\;CFU/g$ and lower 3 log cycle than that in the products collected in market place and made by open type dryer.

• The Journal of Korean Society for Radiation Therapy
• /
• v.18 no.1
• /
• pp.1-5
• /
• 2006

Purpose: IMRT quality assurance(Q.A) is consist of the absolute dosimetry using ionization chamber and relative dosimetry using the film. We have in general used 0.015 cc ionization chamber, because small size and measure the point dose. But this ionization chamber is too small to give an accurate measurement value. In this study, we have examined the degree of calculated to measured dose difference in intensity modulated radiotherapy(IMRT) based on the observed/expected ratio using various kinds of ion chambers, which were used for absolute dosimetry. Materials and Methods: we peformed the 6 cases of IMRT sliding-window method for head and neck cases. Radiation was delivered by using a Clinac 21EX unit(Varian, USA) generating a 6 MV x-ray beam, which is equipped with an integrated multileaf collimator. The dose rate for IMRT treatment is set to 300 MU/min. The ion chamber was located 5cm below the surface of phantom giving 100cm as a source-axis distance(SAD). The various types of ion chambers were used including 0.015cc(pin point type 31014, PTW. Germany), 0.125 cc(micro type 31002, PTW, Germany) and 0.6 cc(famer type 30002, PTW, Germany). The measurement point was carefully chosen to be located at low-gradient area. Results: The experimental results show that the average differences between plan value and measured value are ${\pm}0.91%$ for 0.015 cc pin point chamber, ${\pm}0.52%$ for 0.125 cc micro type chamber and ${\pm}0.76%$ for farmer type 0.6cc chamber. The 0.125 cc micro type chamber is appropriate size for dose measure in IMRT. Conclusion: IMRT Q.A is the important procedure. Based on the various types of ion chamber measurements, we have demonstrated that the dose discrepancy between calculated dose distribution and measured dose distribution for IMRT plans is dependent on the size of ion chambers. The reason is small size ionization chamber have the high signal-to-noise ratio and big size ionization chamber is not located accurate measurement point. Therefore our results suggest the 0.125 cc farmer type chamber is appropriate size for dose measure in IMRT.

• Journal of radiological science and technology
• /
• v.37 no.2
• /
• pp.93-100
• /
• 2014

Recently the development of portable digital wireless imaging system, which acquires digital radiation images by using wireless LAN telecommunications function in an easy and fast way, provides lots of convenience for people. Considering the characteristics of portable imaging tests on emergency and critical patients, this study aims to suggest guidelines for Digital wireless detector by evaluating the effect of de-centering of focus-grid and displacement of subject in detector on the quality of image. The equipments used for this study were Elmo-T6 Digital Mobile X-ray system (SIMAZU Corp.), el' Tor ($14{\times}17$ "Wireless detector), Grid (10:1) and Chest & head phantom. After acquiring post-processing image according to dose increase and de-centering image of grid-focus and head phantom displacement image, this study compared, analyzed and evaluated these images by using a digital image analysis program by Image J. In the change of images based on dose increase, images were rough in the dose of 0.5 mAs, while there was no difference among images in the proper dose of 1~2 mAs and, especially from 2.5 mAs, average value of pixels radically decreased, affecting contrast. Over 3 mAs, contrast dropped due to saturation phenomenon of lungs. As the result of analysis using Image J program, with the increase of displacement between focus-grid and head phantom, the frequency of low pixel value also increase, causing the outline of surface image to disappear, which in turn affects contrast. For better quality imaging, a radiographer must be aware before the time of test that the image quality can be changed based on the critical patient's posture, movement, respiration, displacement of X-ray tube and distance of imaging.