• Transactions of the Korean Society of Mechanical Engineers
• /
• v.13 no.1
• /
• pp.125-134
• /
• 1989

Pseudo-random load waves for fatigue testing were generated by personal computer simulation and preliminary study was performed on the growth behavior of surface fatigue crack under random ladings. The closure behavior and growth rates of surface fatigue crack were significantly influenced by the characteristics of random waves. It was also found that the growth rates of surface fatigue crack under random loadings could not be always described by the effective stress intensity factor based on the concept of crack closure.

• Korean Journal of Remote Sensing
• /
• v.26 no.1
• /
• pp.9-20
• /
• 2010

The LIDAR data can be efficiently utilized for automatic reconstruction of 3D models of objects on the terrain and the terrain itself. In this paper, we attempted to generate simulated waveforms of FW (Full-Waveform) LIDAR (LIght Detection And Ranging). We performed the geometric modeling of the sensor and objects, and the radiometric modeling of the waveform intensity. First, we compute the origins and directions of the sub-beams by considering the divergence effects of a laser beam. We then searched for the locations at which the sub-beams intersected with the objects, such as ground, buildings and trees. Finally, we generate the individual waveforms of the reflected sub-beams and the waveform of the entire beam by summing the individual ones. With the experimental results, we confirmed the waveforms were reasonably generated, showing the characteristics of the surfaces the beam interacted with.

• Proceedings of the Korean Institute of Surface Engineering Conference
• /
• 2012.11a
• /
• pp.69-69
• /
• 2012

• Tribology and Lubricants
• /
• v.6 no.1
• /
• pp.89-98
• /
• 1990

시일의 접촉면이 경사지고, 정현파형이 존재하며 코닝이 있는 경우에 대한 해석을 하였다. 또한 시일링 간극에 존재하는 유체는 비압축성 점성유체이다. 이러한 요소들을 고려한 레이놀즈 방정식의 일반해를 구하기 위하여 멱급수 근사이론을 이용하여 압력분포를 구하였고, 이 결과를 이용하여 시일의 누설 유동량 및 마찰 토오크를 해석하였다. 계산 결과에 의하면 시일 접촉면의 표면파형이나 코닝에 비하여 경사정도가 시일의 성능에 커다란 영향을 주고 있음을 보여주고 있다.

• The Journal of Information Technology
• /
• v.7 no.2
• /
• pp.69-76
• /
• 2004

This paper presents the results of spectral analysis about waveforms and leakage current waveforms on contaminated silicon insulators under various environment conditions.(salt fog, clean fog, rain). The larger the leakage current during 200ms, the higher the power spectrum at 60Hz. If contaminated insulators suffers from high salt density fog, the leakage current occurs with high crest value intermittently, results in the low spectrum. Analysis of leakage current data showed that this electrical activity was characterized by transient arcing behavior contaminants are deposited on the insulator surface during salt fog tests. This provides a path for the leakage current to flow along the surface of the insulator. It is important to have an indication of the pollution accumulation in order to evaluate the test performance of a particular insulator. If the drop in surface resistivity is severe enough, then the leakage current may escalate into service interrupting flashover that degrade power quality.

• Transactions of the Korean Society of Mechanical Engineers
• /
• v.13 no.1
• /
• pp.161-169
• /
• 1989

A stability problem on wave instability of natural convection flow along isothermal vertical cylindrical surfaces has been formulated, accounting for the non-parallelism of the basic flow and thermal fields. Then the problem is solved numerically under the simplifying assumption of the parallelism of the basic flow quantities. It is shown that the flow corresponding to the same characteristic boundary layer thickness becomes more stable as the value of the curvature parameter increases. The stability characteristics for Pr=0.7 appear to be more sensitive to the curvature parameter than those for Pr=7.

• Proceedings of the Korean Institute of Surface Engineering Conference
• /
• 2001.06a
• /
• pp.32-33
• /
• 2001

• Proceedings of the Korean Institute of Surface Engineering Conference
• /
• 1999.05a
• /
• pp.81-81
• /
• 1999

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.24 no.1
• /
• pp.83-90
• /
• 2020

A commercial flow measurement radar sensor estimates a quantity of flowed water using surface flow rate. In this way, the amount of water flowing per unit time cannot be measured accurately because of using an estimation result and it can't response environmental changes. For more accurate flow measurements we need width of waterway, water level and distance that water moved per unit time. Commonly two sensors are used to measure water level and flow rate. In this paper, we propose a method to simultaneously measure the water level and surface flow velocity using a single FMCW radar sensor and design the transmission waveform. In order to verify the waveform design, received signal is modelled based on transmission waveform. In addition, we consider phenomenons and problems that may occur in signal processing.

• Proceedings of the KIEE Conference
• /
• 2009.07a
• /
• pp.720_721
• /
• 2009

일반적으로 BLDC 모터는 고효율 고토크의 특성을 가지고, 넓은 속도 범위에 걸쳐 높은 효율을 유지 하고 제어가 용이하므로 널리 사용 되고 있다. 이러한 BLDC 모터는 구동 원리에 의해서 역기전력의 파형이 구형파를 가지는 것이 유리하다. 또한 BLAC 모터는 효율, 역률, 전력밀도 및 토크 밀도가 높은 장점을 가지고 정현파 역기전력을 요구한다. 매입형 영구자석형 동기전동기 중 할박 구조로 인해서 자속을 집중 시키는 Spoke type 모터의 회전자 표면은 철심으로 이루어져 있기 때문에 회전자 표면의 형상을 Arc설계를 통해서 형상 최적화가 가능하다. 회전자 표면의 Arc 설계를 통해서 공극의 자속밀도 분포의 변화를 줄 수 있어 BLDC 구동 시 요구하는 구형파 역기저력 파형과 BLAC 구동 시 요구되는 정현파 역기저력 파형을 Arc 설계 각도에 따라 다르게 발생 시킬 수 있다. 이를 통해서 역기전력을 형태를 구형파와 정현파 형태를 가지도록 설계하여 BLDC와 BLAC 구동 시에 성능을 FEA를 통해서 비교 평가 하여, 구동 방식에 따른 Spoke type IPM 모터의 형상 설계방법을 제시한다.