• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.18 no.4
• /
• pp.549-560
• /
• 1993

A simple closed form approximation is developed by a new approach presented in this paper for the microstrip surface dyadic Green's function which arises in the problem of an electric current point source on an infinite planar grounded dielectric substrate. This closed form approximation includes the effects of the space wave, the surface wave and their coupling within the transition region near the source, and remains accurate as near as $0.1{\pi}_1$ from the source point for a substrate thickness as large as $0.04{\pi}_1$, where, ${\pi}_1$, is the free space wavelength, This result can significantly facilitate the rigorous moment method analysis of microstrip antenna arrays on relatively this substrates of practical interest. Numerical results illustrating the accuracy of the closed form approximation are presented and CPU times associated with some mutual impedance calculations are also included.

• Proceedings of the Korean Institute of Navigation and Port Research Conference
• /
• 2023.11a
• /
• pp.127-128
• /
• 2023

해양수산 연구개발사업으로 추진하고 있는 "초고속해상무선통신망 무선설비 다각화 및 통신연계 기술개발"은 LTE-M. 무선설비 다각화 개발, 선내 극한환경 대응 무선 M-IoT 기술개발, 선박 M-S2X 기술개발 및 통신망 품질검증 객관화 고도화 연구로 구분되어 추진되고 있다. 해당 논문을 통하여 관련 주요 추진성과를 공유하고 향후 계획을 제시하고자 한다.

• Proceedings of the Korean Institute of Navigation and Port Research Conference
• /
• 2022.11a
• /
• pp.117-119
• /
• 2022

M-IoT 기술 개발과정에서 최종 사용자 및 관련 전문가들의 지속적이고 협력적인 참여를 유도하기 위한 리빙랩 환경 조성을 목표로 한다. 이에 방법론으로써 '선내 IoT 센서 데이터 모니터링을 위한 인터넷 홈페이지 구축'을 제시하여 선내 통신 시스템(표면파 기술) 기술검증 환경 지원 및 M-IoT 기술 기반 홈페이지 구축 과정과 향후 운영방향을 제시하였다.

• Proceedings of the Optical Society of Korea Conference
• /
• 2001.02a
• /
• pp.152-153
• /
• 2001

파장 가변형 광 필터와 파장 선택형 광 스위치는 파장분할다중 광통신 및 광 교환 시스템을 구현하는데 매우 중요한 소자들 중의 하나이다. 특히 음향광학효과를 이용한 파장 가변형 광 필터(AOTF ： Acousto-Optic Tunable Filter)는 150nm 이상의 넓은 파장 가변범위, 1.5nm이하의 좁은 통과대역폭, 수 $\mu\textrm{s}$ 정도의 비교적 빠른 스위칭 속도 그리고 여러 개의 파장 채널을 동시에 선택할 수 있는 장점들을 가지고 있지만, 한편으로 표면 음향파(SAW： Surface Acoustic Wave) 구동에 필요한 RF 파워와 부 모드 (sidelobe)가 비교적 크다는 단점 때문에 실용화에 많은 제약을 받아왔다. (중략)

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2007.10a
• /
• pp.758-760
• /
• 2007

Organic field-effect transistors (OFETs) are of interest for use in widely area electronic applications. We fabricated a copper phthalocyanine (CuPc) based field-effect transistor with different metal electrode. So we need the effect of the substituent group attached to the phthalocyanine on the surface potential was investigated by Kelvin probe method with varying temperature of the substrate. We were obtained the positive shift of the surface potential for CuPc thin film. We observed the electron displacement at the interface between Au electrode and CuPc layer and we were confirmed by the surface potential measurement.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2015.05a
• /
• pp.343-345
• /
• 2015

Currently, SAW Device has been used as a frequency filter using the property of passing only a desired frequency with a narrow bandwidth. However, the areas of activity in various fields since the permanent advantages can be widened by using a non-powered. These sensor tags using SAW Device has been done, but a lot of research, the development of the state still insufficient for Reader Platform. How to read the value of the ID Tag Using SAW Device has a time domain sampling (TDS) method and a frequency domain sampling (FDS) method. The purpose of the paper, we use the FDS method that requires high-speed processing with a relatively slow sampling rate does not require high-speed sampling. Reader Platform was the way to detect ID through PC as FDS way, but It is based on the Cortex-A9 processor and it works a low price, compact and real-time Reader Platform.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.11 no.12
• /
• pp.2374-2381
• /
• 2007

.We have studied to obtain the properly conditions about impedance matching of the SAW filter for the SPUDT type and the bidirectional transducer type later. And we have studied to obtain the SAW filter for the Slanted Finger Interdigital Transducer(SFIT), was formed on the Langasite substrate and was evaporated by Aluminum-Copper alloy and then we performed computer-simulated by simulator In case the SPUDT, we have employed that the number of pairs of the input and output IDT are 50 pairs and the thickness and the width of reflector are $5000{\AA}$ and $3.6{\mu}m$, respectively. And the of the bidirectional transducer, the width of IDT' fingers and the space between IDT' finger and reflector is $1.8{\mu}m$, respectively. Also, we have performed to series connected the SPUDT type with the bidirectional transducer type filter. The frequency response of the fabricated SAW filter has the property that the center frequency is about 190MHz and bahdwidth at the 3dB is probably 5.3MHz after when we have matched impedance. Also, we could obtain that ripple characteristics is less than 0.3dB and insert loss is probably -20dB after when we have matched impedance.

• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.21 no.4
• /
• pp.143-148
• /
• 2021

A systematic study of Bloch surface wave (BSW), which is created by guided mode resonance (GMR) of dielectric multilayer structures with a grating profile, is presented to analyze the sensing performance of bio-sensors. The effect of structural parameters on optical behavior is evaluated by using Babinet's principle and modal transmission-line theory. The sensitivity of designed bio-sensors is proportional to the grating constant at wavelength spectrum, and inversely proportional to the normal wave vector of incident electromagnetic wave at angular spectrum. Numerical results for two devices with SiO/SiO₂ and TiO₂/SiO₂ multilayer dielectric stacks are presented, showing that BSW can be exploited for the realization of efficient diffraction-based bio-sensors from infrared to visible-band range.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.28 no.12
• /
• pp.1007-1010
• /
• 2017

In this paper, a frequency selective surface(FSS) with bandstop operation for radio-frequency spectrum management is presented. The proposed FSS is composed of patterns of fractal-based miniaturized unit cells for stable performance for angles of incidence and polarizations. For practical applications requiring high productivity and environmental compatibility, we fabricated a film-type FSS by screen-printing using Ag ink, rather than a conventional manufacturing method using a printed circuit board. To validate this study, we measured the transmission characteristics of the proposed FSS using the free-space measurement method, and observed the received strength of signal penetrating the FSS film applied to a wall.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2006.05a
• /
• pp.346-351
• /
• 2006

본 논문은 콘크리트 표면 균열 영상에서 균열의 특징을 추출하기 위해, 영상 처리 기법을 적용하여 균열의 특징(길이, 폭, 방향)을 자동으로 추출 및 처리 할 수 있는 기법을 제안한다. 본 논문에서 적용된 영상 처리 기법으로는 균열 영상의 빛을 보정하기 위하여 모폴로지 기법인 채움(Closing)기법을 적용한다. 균열의 경계를 명확히 추출하기 위하여 고주파 강화 필터링을 적용한 후, 8가지 색상(검정, 빨강, 파랑, 초록, 노랑, 자주, 주황, 하늘)으로 명암 값을 분류하고 그 중 빈도수가 가장 높은 색상을 가진 명암 값을 제거한 후에 추출한 영상을 이진화한다. 이진화된 영상에서 콘크리트 표면 균열의 실거리 측정을 위한 임의의 선을 제거하기 위하여 위치 히스토그램을 적용하여 임의의 선을 제거한다. 임의의 선이 제거된 균열 영상에서 $5\times5$ 마스크를 적용하여 균열을 확대시키고, 3차례에 걸쳐 잡음 제거연산을 수행하여 균열의 후보 영역을 선택한 후, 후보 영역으로부터 특정 균열들을 추출한다. 추출된 특정 균열을 모폴로지 기법인 제거(Opening) 연산을 수행하여 균열의 특징이 일정하게 유지되게 하고 미세하게 끊어진 부분을 보정하여 균열의 특징(길이, 방향, 폭)을 측정한다. 실제 콘크리트 표면 균열영상을 대상으로 실험한 결과, 특정 균열이 효율적으로 추출되었고, 특정 균열의 길이, 방향, 폭의 등이 정확히 추출 및 계산되었다.