• Proceedings of the Korean Vacuum Society Conference
• /
• 2010.02a
• /
• pp.66-66
• /
• 2010

$SnO_2$ 나노선은 n-type 반도체 특성을 띄며 트랜지스터, 가스 센서, pH 센서 등 여러 분야에 걸쳐 다양하게 사용되고 있다. $SnO_2$ 나노선은 그 자체만으로 시계방향의 전기적 히스테리시스를 보이며 이것은 나노선 표면에 흡착된 물이나 산소가 발생시키는 전자 갇힘 현상이 가장 큰 원인으로 작용한다. 특히 고분자를 게이트 절연막으로 사용할 경우 게이트 절연막의 전기적 히스테리시스가 소자 특성에 영향을 미치게 되며, 고분자 절연막의 히스테리시스는 $SnO_2$ 나노선의 히스테리시스와 반대인 반시계 방향의 특성을 보인다. 고분자 내에서 발생하는 히스테리시스는 고분자 사이에 흡착된 물 분자나 고분자의 높은 극성을 가지는 작용기 등이 원인으로 작용한다. 전기적 히스테리시스는 FET소자를 구동하는데 있어 부적절한 특성으로, 이것의 원인을 이해하는 것은 중요하며 히스테리시스의 방향과 크기를 조절할 수 있는 기술 또한 중요하다. 본 연구에서는 폴리이미드(PMDA-ODA)를 게이트 절연막으로 사용하여 플렉시블 기판을 만들고 그 위에 $SnO_2$ 나노선을 슬라이딩 전이 방식으로 정렬하여 플렉시블 FET를 제작하였다. 제작된 소자는 $0.7cm\;{\times}\;0.7cm$ 넓이 안에 300개의 FET가 존재하며 SEM 이미지를 통해 넓이 $50{\mu}m$, 길이 $5{\mu}m$의 FET채널에 약 150개의 나노선이 연결되어 있는 것을 확인했다. 이 소자의 히스테리시스는 폴리이미드의 교차결합 정도에 따라, 그리고 폴리이미드 절연막을 제작할 때의 습도에 따라 변하게 된다. 교차결합이 많아지고 습도가 낮아질수록 폴리이미드 절연막 내부에 흡착되는 물분자가 줄어들게 되고 절연막의 히스테리시스가 사라지며 시계방향의 나노선 히스테리시스가 지배적이 된다. 반대로 교차결합이 줄어들고 습도가 높아질수록 폴리이미드 절연막 내부에 물분자가 늘어 나면서 시계반대방향의 폴리이미드 히스테리시스가 FET의 전기적 특성에서 눈에 띄게 나타난다. 이 실험을 통해 고분자 절연막을 사용한 $SnO_2$ 나노선 FET의 전기적 히스테리시스를 조절할 수 있었으며, 소자의 히스테리시스를 없앨 수 있는 가능성에 대해서 논하고자 한다.

• Journal of the Korea Society for Simulation
• /
• v.32 no.3
• /
• pp.1-8
• /
• 2023

Modeling of artificial targets in Synthetic Aperture radar (SAR) mainly simulates radar signals reflected from the faces and edges of the 3D Computer Aided Design (CAD) model with a ray-tracing method, and modeling of the clutter on the Earth's surface uses a method of distinguishing types with similar distribution characteristics through statistical analysis of the SAR image itself. In this paper, man-made targets on the surface and background clutter on the terrain are integrated and made into a three-dimensional (3D) point cloud scatterer model, and SAR image were created through computational signal processing. The results of the SAR Stripmap image generation of the actual automobile based SAR radar system and the results analyzed using EM modeling or statistical distribution models are compared with this 3D point cloud scatterer model. The modeling target is selected as an bridge because it has the characteristic of having both water surface and ground terrain around the bridge and is also a target of great interest in both military and civilian use.

• Analytical Science and Technology
• /
• v.30 no.5
• /
• pp.279-286
• /
• 2017

Determination of the order of latent fingerprints deposition on the surface of thermal paper, often found in crime scenes, is related to the study of time course and aging of fingerprints and can provide additional information in criminal investigations. A preliminary study was performed to determine the deposition order of fingerprints left with two different conditions of deposition pressure and time (in seconds) after 1 day intervals for 7 days on thermal paper (receipt and fax thermal paper) using an iodine fuming method. The resultant images of the visualized fingerprints were analyzed with densitometric image analysis to measure the changes in the areas of the ridges, which can be correlated to the deposition order. No significant variation was found with the different types of thermal paper. The average areas of the friction ridges increased gradually or were similar to the values from day 1 for 3 days, and then a continual decrease was shown from day 4 through day 7. The area values from day 6 and day 7 were less than half of those from day 1. Furthermore, the test with overlapped fingerprints showed the possibility of differentiation between fingerprints that are 1-3 and 6-7 days old based on the clarity visible to the naked eye. Additional experiments with the deposition conditions can prove that the current method is valuable for the determining the order of fingerprint deposition on thermal paper.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2008.06a
• /
• pp.345-345
• /
• 2008

최근 전자 소자의 고주파화, 소형화에 대한 요구가 증대 되면서 많은 소자들을 하나의 시스템에 3차원적으로 실장시키는 SOP (System-on-Package)가 새로운 대안으로 떠오르고 있으며 SOP를 실현하기 위해서는 집적기판에 대한 저온화 공정 기술이 절실히 필요한 실정이다. 현재 집적기판에 사용되는 재료로서 세라믹이 널리 알려져 있지만 세라믹은 취성이 있으며 $1000^{\circ}C$ 이상의 고온화 공정 프로세스를 필요로 하는 근본적인 약점이 있다. 이에 본 연구에서는 상온에서 고속으로 치밀한 성막을 가능케 하는 Aerosol Deposition Method (ADM)를 이용하여 최초로 세라믹-폴리머 복합체 후막을 성공적으로 제작하였다. XRD와 FT-IR 분석 결과 $Al_2O_3$-PMMA, $Al_2O_3$-PI 혼합물을 출발 파우더로 사용하여 제조한 후막이 세라믹-폴리머 복합체임을 확인할 수 있었다. 또한 SEM 분석결과 $Al_2O_3$-PMMA 복합체와 $Al_2O_3$-PI 복합체의 표면 양상이 매우 다르다는 점을 확인하였으며 $Al_2O_3$-PMMA 복합체의 성막률이 $Al_2O_3$-PI 복합체의 성막률에 비해 매우 낮음을 확인하였다. 이러한 현상들은 폴리머 파우더들의 경도와 탄성 차이 때문인 것으로 사료되어 이를 증명하기 위한 실험을 실시하였다. 결국 PMMA 막과 PI 막에 대한경도측정결과와 PMMA 파우더와 PI 파우더의 유성 볼밀링 전후에 대한 SEM 이미지를 통해 PMMA 파우더가 PI 파우더에 비해 경도가 낮으며 반면 탄성이 높다는 것을 간접적으로 확인할 수 있었다. 이와 같은 분석을 통하여 ADM을 이용한 세라믹-폴리머 복합체 후막의 제조에 있어 폴리머 파우더의 경도와 탄성이 매우 큰 영향을 미친다는 것을 알 수 있었다. 본 연구에서는 세라믹-폴리머 복합체 후막을 성공적으로 제조하기 위해서 폴리머 파우더의 적절한 선택이 중요함을 알 수 있었으며 ADM을 이용한 세라믹-폴리머 복합체 후막의 제조에 대한 가이드 라인을 제시할 수 있을 것으로 기대된다.

• Korean Chemical Engineering Research
• /
• v.51 no.3
• /
• pp.388-393
• /
• 2013

The study was focused to evaluate the possibility for combination membrane of bacterial cellulose (BC) and graphene with high electrical properties. BC with natural polymer matrix was known to have strong physical strength. For the combination of graphene with BC, the surface of graphene was modified with oxygen plasma by changing strength and time of radio waves in room temperature. Water contact angle of modified graphene grew smaller from $130^{\circ}$ to $12^{\circ}$. XPS analysis showed that oxygen content after treatment increased from 2.99 to 10.98%. Damage degree of graphene was examined from $I_D/I_G$ ratio of Raman analysis. $I_D/I_G$ ratio of non-treated graphene (NTG) was 0.11, and 0.36 to 0.43 in plasma treated graphene (PTG), increasing structural defects of PTG. XRD analysis of PTG membrane with BC was $2{\theta}$ same to BC only, indicating chemically combined membrane. In FT-IR analysis, 1,000 to 1,300 $cm^{-1}$ (C=O) peak indicating oxygen radicals in PTG membrane had formed was larger than NTG membrane. The results suggest that BC as an alternation of plastic material for graphene combination has a possibility in some degree on the part like transparent conductive films.

• Korean Journal of Optics and Photonics
• /
• v.16 no.6
• /
• pp.516-520
• /
• 2005

We proposed an efficient phase stepping method for the use in fiber-optic ESPI. To improve phase-stepping accuracy and efficiency, a fiber-optic Michelson interferometer was phase-modulated by a ramp-driven fiber stretcher, resulting in 4$\pi$ phase excursion in the PD interference signal. The zero-crossing points of the signal, which have consecutive $\pi$ phase difference, were carefully detected and used to generate trigger signals for the CCD camera. From the experimental results by using this algorithm, $\pi$/2 phase-stepping errors between the speckle patterns were measured to be less than 0.6 mrad with 100 Hz image capture speed. Also it has been shown that the error from the nonlinear phase modulation and environmental perturbations could be minimized without any feedback algorithm.

• The Korean Journal of Malacology
• /
• v.25 no.3
• /
• pp.203-210
• /
• 2009

Optical properties and color analysis of nacreous layers were performed using various pearl shells. The cross section and microstructure of the surface in each nacreous layers were observed through a SEM (Scanning Electron Microscope), and the diffraction pattern on SEM images was analyzed using FFT (Fast Fourier Transform). Through these analysises, it was verified that the color and optical characteristics are closely related to the structure of nacreous layers. Incident angle-dependent reflection spectrum was used to examine the phenomena of color differenceas the direction of observation. Quantified values on the color change were obtained by CIE $L^*a^*b^*$ color scale. Using this research, database for the characteristics of natural pearl shells can be established, and the precise analytic method for observation of pearl shells was suggested.

• Journal of the Korean Vacuum Society
• /
• v.17 no.1
• /
• pp.73-79
• /
• 2008

In order to apply for transparent conductive oxide(TCO), we deposited ZnO thin films on the glass at room temperature by RF magnetron sputtering method. Deposition conditions for high transmittance and low resistivity were optimized in our previous studies. Under the deposition condition with the RF power of 200 W, target to substrate distance of 30 mm and working pressure of 5 mTorr, highly conductive($7.4{\times}10^{-3}{\Omega}cm$) and transparent(over 85%) ZnO films were prepared. Highly oriented ZnO film in the [002] direction were obtained with specifically designed ZnO targets. Systematic study on dependence of deposition parameters on electrical and optical properties of the as-grown ZnO films were mainly investigated in this work. And for application tests using these films as transparent conductive oxide anodes, wet chemical etching behaviors of ZnO films were also investigated using various chemicals. Wet-chemical etching behavior of ZnO films were investigated using various acid solutions. The concentrations of these different acid solutions were controlled to study the etching shapes and etching rate. ZnO films were anisotropically etched at various concentrations and wet etching led to crater-like surface structure. Also we firstly found that the etching rate and etching shapes of ZnO films strongly depended on the etchant concentrations (i.e. pH) and the etching rate is exponentially decreased with increasing pH values regardless of the acid etchants.

• Journal of Conservation Science
• /
• v.35 no.2
• /
• pp.117-129
• /
• 2019

In this study, black-glazed porcelain excavated from the Shinan shipwreck is analyzed to distinguish its characteristics. Glazes of Hong-Tang kiln are thin and exhibit little vitrification, whereas the Ci-Zhou-type and Cha-Yang kilns are similar in terms of their cross section. However, Raman mapping images reveal difference in the distribution area of magnetite. In this study, firing experiments are conducted to determine how iron oxides change properties in black glazes. The results show that when hematite is fired to a temperature greater than $1250^{\circ}C$, it becomes magnetite. Therefore, it is estimated that a firing temperature of approximately $1200^{\circ}C$ is suitable for the Hong-Tang kiln. In addition, glazes of the Ci-Zhou-type and Cha-Yang kilns are fired at approximately $1300^{\circ}C$. However, when the characteristics of firing in ancient kilns are considered, porcelain can be fired for a sufficiently long period to extend to glaze surfaces.

• Economic and Environmental Geology
• /
• v.42 no.5
• /
• pp.403-412
• /
• 2009

The objective of this study is to investigate the geochemical change of feldspar minerals by supercritical $CO_2$, which exists at $CO_2$ sequestration sites. High pressurized cell system (100 bar and $50^{\circ}C$) was designed to create supercritical $CO_2$ in the cell and the surface change and the dissolution of plagioclase and orthoclase were observed when the mineral surface reacted with supercritical $CO_2$ and water (or without water) for 30 days. The polished slab surface of feldspar was contacted with supercritical $CO_2$ and an artificial brine water (pH 8) in the experiments. The experiments for the reaction of feldspar with only supercritical $CO_2$ (without brine water) were also conducted. Results from the first experiment showed that the average roughness value of the plagioclase surface was 0.118 nm before the reaction, but it considerably increased to 2.493 nm after 30 days. For the orthoclase, the average roughness increased from 0.246 nm to 1.916 nm, suggesting that the dissolution of feldspar occurs in active when the feldspars contact with supercritical $CO_2$ and brine water at $CO_2$ sequestration site. The dissolution of $Ca^{2+}$ and $Na^+$ from the plagioclase occurred and a certain part of them precipitated inside of the high pressurized cell as the form of amorphous silicate mineral. For the orthoclase, $Al^{3+}$, $K^+$, and $Si^{+4}$ were dissolved in order and the kaolinite was precipitated. In the experiments without water, the change of the average roughness value and the dissolution of feldspar scarcely occurred, suggesting that the geochemical reaction of feldspars contacted with supercritical $CO_2$ at the environment without the brine water is not active.