• Laser Solutions
• /
• v.8 no.2
• /
• pp.21-32
• /
• 2005

The excimer laser ablation of a polymer occurs by the excitation of chemical bonds to energy levels that are above the dissociation energy. In this process, however, fragmented debris is finally ejected explosively by the scission of bonds and accumulates on the material surface. In the present work, a process for eliminating surface debris contamination generated by the laser ablation of a polymer is developed. The proposed approach for removing surface debris utilizes an erasable ink pasted on a polymide. The ink pasted polyimide is ablated by KrF excimer laser. The surface debris ejected from the polyimide is then combined with the ink layer on the polymer. Finally, both the surface debris and the ink layer are removed using adhesive tape or alcohol solvent. The results suggest that the erasable ink method is a simple, low cost, and extremely effective debris eliminating process.

• Proceedings of the Materials Research Society of Korea Conference
• /
• 1994.11a
• /
• pp.60-60
• /
• 1994

• Proceedings of the Korean Vacuum Society Conference
• /
• 2013.02a
• /
• pp.610-610
• /
• 2013

그래핀을 구성하는 탄소 원자는 모두 표면에 존재하기 때문에, 맞닿아 있는 물질에 따라 그래핀의 물리적 특성에 민감한 영향을 미치기도 한다. 본 연구에서는 라만분광법과 원자 힘 현미경(atomic force microscopy, AFM)을 이용하여 통상적인 열처리 조건에서 그래핀에 탄화수소가 흡착될 수 있는 가능성을 탐구하였다. 산소가 없는 조건에서 열처리된 그래핀으로부터 D, G, 2D 봉우리와 겹쳐지는 폭이 넓은 새로운 라만 봉우리들이 관찰되었다. 열처리 시간, 온도 및 진공도에 따른 라만 스펙트럼의 변화와AFM에 의해 확인된 표면의 구조 변화로부터 새로이 관찰된 라만 봉우리는 탄화수소의 탄화에 의해 그래핀의 표면에 형성된 비결정성 탄소물질(amorphous carbon)임을 확인하였다. 기계적 박리법과 화학기상증착법으로 시료를 준비할 때 사용된 폴리머 잔유물이 열처리 과정에서 탄화수소를 배출하는 것으로 판단된다. 이 연구는 그래핀 소자의 작동에 있어서 환경적인 효과를 이해하고 탄화에 의해 그래핀 표면에 만들어진 비결정질 탄소를 정량화하는데 도움을 줄 것이다.

• Conservation Science in Museum
• /
• v.22
• /
• pp.1-14
• /
• 2019

The excavation of the south mound of Hwangnamdaechong Tomb in Gyeongju has yielded diverse types of shell artifacts. Among the them, this paper investigated fragments of shell ornaments with gilt-bronze frames, the use of which has not been identified. It was revealed that the artifacts are in fact nautilus cups, which had never been found previously in excavations in Korea. A nautilus is a species marine mollusk known to be the closest to prehistoric ammonites. It has brown stripes on the surface of the shell and septa inside, and a siphuncle penetrating to the center of the septa. It is known that nautilus cups were made and used in China, but only three examples have thus far been identified. These surviving cups have metal ornaments and are dated to the Western and Eastern Jin periods of China. No nautilus cups have been found in Japan, and the shell ornaments investigated in this study were determined to be the first nautilus cups ever found in Korea. Nautilus cups are mentioned in ancient documents and literature, including in poems by the Tang Dynasty poet Li Bai and in Joseon-period documents. This paper presents the biological characteristics of nautili, cases of excavation of nautilus cups outside Korea, and findings from the basic research of the nautilus cup from Hwangnamdaechong Tomb.

• Journal of the Korean Institute of Telematics and Electronics A
• /
• v.29A no.1
• /
• pp.33-40
• /
• 1992

Several etching phenomena were observed and analyzed in diaphragm process performed on 4-inch (100) Si wafers for sensor application. In case of deep etching to above 300$\mu$m depth, the etch-defects appeared at etched surface could be classified into three categories such as hillocks, reaction products, and white residues. It was known that the hillock had a pyramidal shape or trapizoidal hexahedron structure depending on the density and size of the reaction products. The IR spectra showed that the white residue, which was due to the local over-saturation of Si dissolved in solution, was mostly Si-N-O compounds mixed with a small amount of H and C etc. Also, the difference in both the existence of etch-defects and etch rate distribution over a whole wafer was investigated when the etched surfaces were downward, upward horizontally and erective in etching solutions. The obtained data were analyzed through flow pattern in the etching bath. As the results, the downward and erective postures were favorable in the etch rate uniformity and the etch-defect removal, respectively.

• Applied Microscopy
• /
• v.39 no.4
• /
• pp.365-371
• /
• 2009

This study was investigated to observe morphological changes of two pre-astronauts' hair, male and female by electron microscopy and to analyze its tensile strength by using rheometer. The surface of those two pre-astronauts' hair, which were very rough and irregular, contained separated scales and destroyed remnants of cuticular cells. Also, there were many holes on the cytoplasm of the cuticular cells which forms the cuticle layer. The destruction begins when the endocuticle where the holes form gets destroyed. And then, The tensile strength of female pre-astronaut's hair was 14.60 mm which is 10% reduced, compared to that of the normal healthy hair. Thus, this result thought to be due to the prolonged change of the biorhythm and psychological instability of the pre-astronauts.

• Journal of Biosystems Engineering
• /
• v.33 no.2
• /
• pp.136-141
• /
• 2008

Fecal contaminations on poultry carcasses, not easily discemable by human eyes, are potential harbor sites of pathogenic Escherichia Coli (E. coli O157:H7). Development of sensitive detection methods for fecal contamination is essential to ensure safe production of poultry products. Fluorescence has been shown to be very sensitive in detecting fecal and other biological substances that can harbor pathogens. In this study, fluorescence excitation-emission spectra of poultry fecal matter were compared with spectra for poultry skin and meat. Results indicated that the combinations of fluorescence intensities at the wavelength of 520 nm, 579 nm, 625 nm, and 635 nm with 411 nm excitation showed above 97% accuracy for differentiation of the contaminants from poultry tissues. Excitation and emission bands determined could be used for constructing a real-time fluorescence imaging device for detection of harmful residues on poultry carcasses.

• Journal of Conservation Science
• /
• v.27 no.3
• /
• pp.301-312
• /
• 2011

Epoxy resin has superior durability and adhesive strength and proper physical strength so that it is used to diversity materials for multi-purposes. However epoxy resin is hardly removed after hardening specially once it is applied to artefacts, it is difficult to remove them under re-conservation. This paper is an experimental study on removing epoxy resin applied to iron objects using Nd:YAG laser cleaning system. Tests conducted in this study investigated how increasing laser energy and pulses would give effect on samples. The samples were prepared in a way that epoxy resin, itself pure and one which was mixed with pigment and they were applied to iron coupons and corroded iron coupons respectively. As a result of experiment, pure epoxy resin applied to corroded iron coupons was ablated at high laser energy but epoxy resin applied to iron coupons and mixing with pigment were not ablated but discolored and bubbled due to laser-induced heat generation. Results of FT-IR showed no component alteration of shifted resins and no residues on the surfaces ablated by laser irradiation. From SEM-EDS for removed surfaces, the debris from epoxy resin and melting iron was observed. Therefore, this study demonstrated the possibilities and limitations for laser cleaning to remove epoxy resin from iron objects.

• Journal of Korea Foundry Society
• /
• v.5 no.3
• /
• pp.47-51
• /
• 1985

FMC(FULL MOLD CASTING)법(法)이란 발포 polystyrene모형을 사용하여 조형후, 주형으로부터 모형을 발형치 않은채, 용탕을 주입하여 주물을 제조하는 방법을 말한다. 합성수지 발포체를 주조용(用) 모형의 재료로써 사용하는 방법은 1956년 미국의 슈로이어(H. F. Shroyer)에 의하여 발명되었으나 이것은 실제 주조에 응용하기에는 여러 곤란한 문제가 있어, 단순히 착상에 그치고 공업적으로 적용할 수 있는 기술을 확립치는 못하였다. 그후 서독 아헨대학교수로서 당시 발포폴리스티렌을 포함하는 각종단열재 제조회사 G+H 사(社)의 A. Wittmoser에 의하여 1962년에 처음으로 공업적으로 이용되어, 현재 서독, 미국, 일본등 유럽전역에서 응용되고 있다. 당사(當社)는 1977년6월 5일 첫 가동된 이후, 동(同)그룹 사(社)인 현대자동차로부터 자동차금형 (Press Die)주조를 FMC법(法)으로 생산하여 달라는 요구를 받고, 그해 12月부터 개발시험에 착수하여 이듬해 6월(月)부터 본(本) FM주조를 적용하여왔다. 그러나 1) 폴리스티렌 모형의 주입시(時) 부(不)기화 잔유물에 의한 주물표면결함 2) 도형제 박리 현상에 의한 표면결함 3) 주입시(時) 다량의 매연발생 및 4) 조형시(時) 모형의 변형에 의한 칫수결함 등의 문제가 대두되어 품질면에서는 1982년6월(月)에 와서야 어느정도 정상궤도에 도달하여 본격적인 FM 생산을 해오고 있는 중이다. 여기서 그동안 당사가 경험한 대형주물 (자동차금형:$1{\sim}10$톤/개)에 있어서의 FM 주조법의 적용사례를 본지(本誌)를 통하여 간단히 소개하고자 한다.

• Proceedings of the KIEE Conference
• /
• 2007.07a
• /
• pp.286-287
• /
• 2007

본 논문에서는 최근 유체소자 재료로써 많이 사용되고 있는 polymethyl methacrylate (PMMA)의 레이저 직접식각에 관한 특성을 나타내었다. 식각을 위한 레이저 원으로 기본파가 1064 nm, 반복율이 10 Hz인 Nd:YAG 레이저의 4고조파 성분 ($\lambda$=266 nm)을 사용하였다. X-Y-Z 축으로 이동 가능한 스테이지의 수평 이동속도를 변화시키며, 표면으로 조사되는 펄스 수를 제어하였다. 식각 후 광학현미경으로 식각 단면을 조사하여 식각 깊이와 폭을 측정하였다. 측정된 식각 깊이로부터 식각률을 계산하고, 그 값과 레이저 빔 밀도와의 관계를 알아보았다. 그 결과 시료 표면에 조사되는 레이저 빔 밀도의 로그값과 선형적인 관계를 갖는 것을 확인할 수 있었다. 또한 주사전자현미경을 이용하여 채널 형상 및 채널 내벽을 관찰하였다. 마이크로 채널 내벽에 식각 과정에서 발생한 생성물의 제거를 위해, 레이저 식각과 함께 질소가스 블로잉을 해주었다. 질소 블로잉 압력 1500 torr에서 식각 잔유물이 제거된 내벽을 볼 수 있었다. 실험결과, Nd:YAG 4고조파를 이용하여 PMMA 기판상에 유체 이동을 위한 마이크로 채널을 형성시킬 수 있었다.