• Journal of Adhesion and Interface
• /
• v.4 no.4
• /
• pp.1-6
• /
• 2003

After atmospheric pressure plasma treatment of polypropylene(PP) film surface, we measured the contact angle of the surface by using polar solvent (water) and non-polar solvent (diiodomethane). We also calculated the surface free energy of PP film by using the measured values of contact angles. And then we analyzed contact angle and surface free energy with changing the condition of atmospheric pressure plasma treatment. Upon each condition of atmospheric plasma treatment, contact angle and surface free energy showed an optimum value or leveled off.

• Polymer(Korea)
• /
• v.27 no.2
• /
• pp.98-105
• /
• 2003

The surface energy and the effect of functional groups on the surface of the ozone-treated low-density polyethylene (LDPE) film were studied. Treatment conditions were treatment time, total amount of transferred ozone, and ozone concentration. The introduction of polar groups on the surface of LDPE film after ozone treatment was confirmed by FTIR-ATR and XPS analyses. Surface fee energy of the LDPE film was examined by a contact angle method. The ozone treated-LDPE film showed a decreased water contact angles about 15$^{\circ}$ mainly due to the increased concentration of oxygen-containing functional groups, which was attributed to the increased surface free energy or $O_{IS}/C_{IS}$Also, the concentrations of the oxygen-containing functional groups on the surface of LDPE film increased with ozone treatment time and concentration, whereas no significant effects were found for the total amount of transferred ozone. From the dyeability test using Kubelka-Munk equation, it was found that the ozone treatment plays an important role in the growth of oxygen-containing functional groups of LDPE film, resulting in the improvement of dyeability for basic dyeing agent.

• Proceedings of the KSEEG Conference
• /
• 1999.04a
• /
• pp.273-275
• /
• 1999

• Elastomers and Composites
• /
• v.35 no.2
• /
• pp.98-105
• /
• 2000

Using FT-IR and contact angle measurements it is observed that the chemical surface treatments on virgin carbon blacks lead to a change of the surface properties, including surface functionality and surface free energy It is found that the developments of surface functional groups on acidically and basically treated (ACB and BCB in this study, respectively) carbon blacks are largely correlated with the specific component of surface free energy of the carbon blacks. However, a significant advantage of compounding composites is gained by BCB or NCB (nonpolar chemical treatment) specimens, resulting in improving the hardness, elongation at break, and tensile strength. Particularly, it is seen that the tensile strength of the composites are greatly depended on the London dispersive component of surface free energy determined from the contact angle measurements. It is then concluded that the London dispersion component of carbon blacks plays an important role in an organic rubbers-based compounding composite system.

• Transactions of the Korean Society of Mechanical Engineers B
• /
• v.35 no.5
• /
• pp.445-450
• /
• 2011

We studied the adhesion characteristics of polymer films (PC, PET, EVA) treated by atmospheric pressure plasma. The process parameters were the frequency, gas flow, and treatment time; we studied the effects of these parameters on the adhesion characteristics of the polymer materials. We used de-ionized water and diiodomethane as the polar and nonpolar solvents, respectively, for measuring the contact angles, and subsequently calculated the surface free energy of each polymer film. The adhesion characteristics were studied by carrying out a $180^{\circ}$ peel-off test. The polymer films treated with plasma developed a hydrophilic surface, which led to increased surface free energy and improved adhesion properties. From the results for contact angle, surface free energy, and adhesion strength, we obtained the optimal plasma-treatment conditions.

• Journal of the Korean Society for Marine Environment & Energy
• /
• v.8 no.3
• /
• pp.116-121
• /
• 2005

In the present paper, a new calculation algorithm far solving large scale environmental or geophysical flows with free surface is proposed where the non-hydrostatic pressure component is taken into consideration. Predictor-corrector fractional step approach with explicit, forward time marching scheme in the sigma coordinate system is employed. In order to validate the present calculation algorithm and to estimate the effects of non-hydrostatic pressure on resultant flow and free surface movements, example calculations are carried out for typical steady and unsteady flow problems. Present method can be applied to the meso-scale free surface flows with complex bottom topography where MAC-like 3-d hydrodynamic calculations are quite ineffective and uneconomic.

• Polymer(Korea)
• /
• v.29 no.2
• /
• pp.151-155
• /
• 2005

The effect of acid-base treatments of carbon blacks (CBs) was investigated in the mechanical properties of CBs/rubber composites. The surface characteristics of the CBs were determined by the pH, acid-base values, and surface energetics. Their mechanical properties of the composites were also evaluated by the crosslink density $(V_e)$ and tearing energy (T). As an experimental result, acidically treated CBs led to the increase of the specific component $({\gamma}s^{sp})$, resulting in decreasing the mechanical properties of the composites. However, basically treated CBs showed a higher value of the dispersive component $({\gamma}s^L)$ than that of the untreated or acidically treated CBs. It was also found that the interaction of the CBs-rubber was improved, resulting in the improvement of the crosslink density and mechanical properties of the composites. It was then remarked that the acid-base characteristics of the CB surfaces made an important role in improving the physical properties of the rubber matrix composites.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2009.06a
• /
• pp.334-334
• /
• 2009

본 논문에서는 질화갈륨 (GaN) 표면에 나노-스피어 리소그라피를 가능하게 하기 위하여 친수성으로 개질을 시도하였다. 플라즈마 처리 공정 변수인 공정 파워, 처리시간을 변화시키면서 표면을 개질하였으며, 친수성 개질을 확인하기 위하여 접촉각 및 표면 자유 에너지 변화를 측정 계산하였다. 또한 FT-IR 분석을 통하여 표면 작용기를 확인하였다. 최종적으로 본 실험의 결과로 얻어진 친수성이 질화갈륨 표면의 나노-스피어 리소그라피에 얼마나 큰 영향을 주는지 표면 모폴리지를 SEM을 이용하여 관찰하였다.

• Nuclear Engineering and Technology
• /
• v.3 no.1
• /
• pp.21-31
• /
• 1971

The part of the work of plastic deformation of metal goes into the changes in the total surface free energy. This contribution is dependent on the specific surface free energy, which is affected by the environment. Based on thermodynamical approach, volume constancy requirement and adsorption induced two distinct dislocation interaction mechanisms for strengthening or weakening of metals at surface, theoretical derivation has been made to show that the environmental contribution on the strain hardening, the stress and the energy required for plastic deformation can be expressed in terms of solid surface tension in vacuum (${\gamma}$$_{s}$), interfacial tension (${\gamma}$$_{se}$ ), surface dislocation density ($\rho$$_{s}$), internal dislocation density ($\rho$$_{i}$) and fraction of surface site uncoverage (f). On the basis of theoretical derivation, the various mechanical behaviours under different environments are predicted.d.d.

• Proceedings of the Membrane Society of Korea Conference
• /
• 1999.04a
• /
• pp.119-122
• /
• 1999