• Proceedings of the Korean Society Of Semiconductor Equipment Technology
• /
• 2007.06a
• /
• pp.144-148
• /
• 2007

레이저 변위 센서를 이용한 비접촉식 표면거칠기 측정 방법에 관하여 접촉식과 비교 평가함으로 신뢰성을 확인하였으며, 비교측정하기 위하여 시편을 제작하고 접촉식 방법과 비접촉식 방법으로 측정하고 비교 분석하였다. 분석 결과 접촉식에 비해 비접촉식의 측정에서의 값은 신뢰할 수준으로 판단되었다.

• Ecology and Resilient Infrastructure
• /
• v.8 no.1
• /
• pp.1-8
• /
• 2021

A surface image velocimeter (SIV) measures the velocity of a particle group by calculating the intensity distribution of the particle group in two consecutive images of the water surface using a cross-correlation method. Therefore, to increase the accuracy of the flow velocity calculated by a SIV, it is important to accurately calculate the displacement of the particle group in the images. In other words, the change in the physical distance of the particle group in the two images to be analyzed must be accurately calculated. In the image of an actual river taken using a camera, camera lens distortion inevitably occurs, which affects the displacement calculation in the image. In this study, we analyzed the effect of camera lens distortion on the displacement calculation using a dense and uniformly spaced grid board. The results showed that the camera lens distortion gradually increased in the radial direction from the center of the image. The displacement calculation error reached 8.10% at the outer edge of the image and was within 5% at the center of the image. In the future, camera lens distortion correction can be applied to improve the accuracy of river surface flow rate measurements.

• Korean Journal of Optics and Photonics
• /
• v.10 no.3
• /
• pp.201-207
• /
• 1999

The fiber-optical confocal scanning interference microscope with a simple configuration was constructed with a 4-port fiber-optic coupler, and the new method based on the phase shifting method was proposed for surface profiling by the system. In the method, the height of a specimen was determined from the phase of confocal beam. It was verified experimentally that the method was applicable to even the confocal interference microscope with a long-wavelength source and a low NA objective, and that the scanning time could be drastically reduced compared with the conventional method. Finally, it was found that our method is less sensitive to the variation of surface reflectivity than the conventional method.

• Journal of the Korean Applied Science and Technology
• /
• v.32 no.3
• /
• pp.522-527
• /
• 2015

We applied a displacement current measurement technique for the study of L-${\alpha}$-dilauryl phosphatidylcholine (DLPC) monolayer. Displacement current was generated at the DLPC monolayer on the water surface, while induced by compression and expansion of the monolayer. Generation of Maxwell displacement current (MDC) was observed when surface areas per DLPC molecule were approximately $200{\AA}^2$ and $40{\AA}^2$. We investigated MDC for monolayer compression cycles, and found that MDC reached the maximum at the molecular area, which was measured right before surface pressure began to increase during compression cycles. The monolayer surface morphology of Langmuir-Blodgett (LB) films was characterized using atomic force microscope (AFM). As a result, we measured the result from the microscopic properties shown in the AFM images of LB films that molecules in the monolayer were in good orientations and the thickness of the monolayer ranged from 5 to 10 nm.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2006.05a
• /
• pp.15-16
• /
• 2006

In-process surface roughness prediction is studied in this research. To implement in-process prediction, spindle displacement is introduced. Machined surface's roughness is assumed to be expressed in terms of spindle displacement. In-process measurement of spindle displacement is conducted using CCDS (cylindrical capacitive displacement sensor). Two prediction models are developed. One is simple linear model between measured surface roughness and values by spindle displacement. The other is multiple regression model including machining parameters like spindle speed, fee rate and radial depth of cut. Relation between machined surface roughness and roughness by spindle displacement are verified.

• Journal of the Korean Geosynthetics Society
• /
• v.12 no.4
• /
• pp.133-141
• /
• 2013

This paper describes the earthquake risk evaluation of 15 sites of architectural heritages, which are considered ground conditions of sites in Seoul. In order to acquire the input data of earthquake response analysis, surface wave exploration was performed at the site. Earthquake response analysis and 3D earthquake safety evaluation were carried out under the base of scenario earthquakes. Ground displacements of areas, which are located on architectural heritages, are showed about 0.5 mm ~ 9.7 mm, and it was analyzed to small affected by earthquakes. In case of Naksungdae three-story stone pagoda, ground displacement is similar to the others. However, displacement of three-story stone pagoda with granite is 30 mm on the top, because the greatest occurrence of that is caused by stress release at seismic wave effect.

• Korean Journal of Optics and Photonics
• /
• v.8 no.3
• /
• pp.199-203
• /
• 1997

Fine displacement of spherical suface was detected and analyzed by Twyman-Green interferometer and the interferogram analysis using Fourier transform method. The surface profile was obtained from single interferogram by introducing the carrier freguency to the interferogram. The interferogram was processed in the spatial frequency domain by fast Fourier transform, and the phase distribution was obtained by inverse Fourier transform. The 3-dimensional distribution for the surface displacement was obtained. It was compared with the calculated surface displacement and the error was less than λ/10.

• Journal of the Korean Magnetics Society
• /
• v.22 no.5
• /
• pp.183-187
• /
• 2012

In this paper, fluid movement of magnetic fluid which has free surface is investigated in a container subjected to a horizontal oscillation. Here, the vertical magnetic field is applied from the bottom of this container. The experiment is performed on the magnetic fluid in a rectangular and a cylindrical container and the effects of magnetic force exerted on the magnetic fluid are investigated on the resonance frequency and liquid surface displacement. The increase of magnetic field affects on the maximum resonance point and the liquid surface displacement. In result, it changes the amplitude of the surface wave and the period of sloshing fluid movement.

• Proceedings of the Korean Society Of Semiconductor Equipment Technology
• /
• 2006.10a
• /
• pp.120-125
• /
• 2006

본 연구에서는 기존의 레이저 변위센서 대신 접촉형 변위센서를 이용하여 마스크-기판간 갭 간격 및 평형 조절 장치를 구현함으로써 기판의 표면 상태에 관계없이 정확한 마스크-기판간 갭의 조정, 평형 유지가 가능하도록 하였다.

• Proceedings of the KSRS Conference
• /
• 2009.03a
• /
• pp.190-195
• /
• 2009

서남극 빙상의 감소 속도는 급격히 가속화되고 있으며, 전 지구적 해수면 상승과 기후변화 예측을 위해 이 지역에 대한 지속적인 관찰이 요구되고 있다. 본 연구에서는 서남극 Canisteo 반도와 주변 지역이 촬영된 2쌍의 ERS-1/2 tandem pair에 4-pass 위상차분간섭기법을 적용하여 위상차분간섭도를 생성하였고, 빙하와 해빙, 그리고 빙붕의 표면 변화를 관찰하였다. 위상차분간섭도에서 센서 방향으로의 변위를 추출한 결과 해안 빙하와 그에 인접한 정착빙은 같은 방향의 움직임을 나타냈다. 특히 빙하와 맞닿은 부분의 정착빙은 그 움직임이 다른 부분에 비해 컸는데, 이는 빙하의 하강 및 유실이 해빙에 영향을 끼치는 것으로 판단된다. 정착빙의 가장자리에 위치한 해빙은 해류의 영향에 기인하는 움직임을 보였으며, 이 해빙의 유형이 부빙 또는 유빙임을 알 수 있었다. 반도 양옆에 위치한 빙붕은 모두 센서 방향으로의 움직임을 보였으나 그 크기에서 차이를 나타냈다. 빙붕의 표면에서는 원형의 국부적 함몰이 다수 관찰되었는데, 이는 남극저층수의 적은 유입으로 인해 형성된 melt pond로 추정된다.