• Journal of Sensor Science and Technology
• /
• v.7 no.6
• /
• pp.446-451
• /
• 1998

Recently, conductive polymer is known to be direct-drive active material which can convert electrical energy directly into mechanical energy. In this paper, the polymerized thickness of polypyrrole is measured with change of polymerization conditions and the mechanical bending is analyzed for various polymerized thickness. In order to detect of mechanical bending, bending beam method using the bridge shaped sample is used. Thickness of polypyrrole is proportional to polymerization time in fixed current density. Also it shows a linear relation with the applied current except high current density. Maximum displacement appears at the thickness of $18.35{\mu}m$ which has been polymerized at $5.4{\mu}A/mm^2$ and for 120min and actuated at the frequency of 0.1Hz.

• Journal of the Korean Chemical Society
• /
• v.39 no.4
• /
• pp.294-300
• /
• 1995

The photoelectrochemical behavior of polypyrrole films on Pt, glassy-C and indium tin oxide(ITO) under illumination was studied in aqueous solution containing a redox couple such as I-/I2 or Fe(CN)64-/Fe(CN)63-. Polypyrrole(PPy) was coated on Pt, glassy-C and ITO electrodes using electrochemical polymerization of pyrrole by potentiostatic method. Illumination of the PPy film results in the increase of cathodic and anodic currents at redox potentials of the redox species. These enhanced currents are caused both by the semiconductor characteristics of PPy and by the photothermal acceleration of redox reaction at PPy-electrode surface, and are dependent on the pH of redox solutions and the dopants in PPy.

• Proceedings of the Korean Fiber Society Conference
• /
• 1998.04a
• /
• pp.121-125
• /
• 1998

1977년 polyacetylene(PA)이 할로겐 도핑에 의해 금속에 필적하는 도전성을 나타낸다는 것이 발견된 이래 전도성 고분자는 전기 전도도 및 전자 상태를 자유롭게 제어 할 수 있다는 특징 때문에 2차 전지 및 연료 전지, 가스분리막, 우주 항공용 경량 도전재료, 대전방지제등의 넓은 응용분야를 가지며 현재에도 기초 연구 및 응용 연구의 양면에서 활기를 띠고 있다.(중략)

• Proceedings of the Korean Fiber Society Conference
• /
• 1998.04a
• /
• pp.126-129
• /
• 1998

전기 전도성 고분자는 전하 이동체의 종류에 따라 이온과 전자 전도성 고분자로 구분되며 전자 전도성 고분자는 절연체인 고분자에 전도체를 혼합하는 전도성복합체와 본질적으로 전도성을 갖는 고분자로 나뉘어진다. 전도성복합체는 제법이 간단하여 이미 전기ㆍ전자산업에 많이 이용되고 있지만 일정한 전도도의 유지와 가공성 향상 및 염가의 제품 제조는 아직 과제로 남아있다.(중략)

• Proceedings of the Korean Fiber Society Conference
• /
• 2001.10a
• /
• pp.314-315
• /
• 2001

전기 전도성 고분자는 폴리 아세틸렌을 적절한 electron withdrawing group이나 electron donating group을 이용하여 도핑하면 전도도의 증가를 가져온다는 보고 이래로 활발하게 연구되어져 왔다. 그 중에서 폴리피롤은 높은 전도도와 산화안정성, 인체에 무해한 특성 때문에 여러 분야에 응용되고 있으며 분자전자장치나 고체 배터리의 전극, 축전기의 고체 전해질, 전자파 차폐 재료, ion센서, 위장막의 제조 등의 용도전개 잠재력이 무궁하다. (중략)

• Membrane Journal
• /
• v.22 no.1
• /
• pp.35-45
• /
• 2012

We prepared the highly ordered nano-wires of polypyrrole, polyaniline conductive polymers and polypyrrole/ polyaniline conductive copolymers by templating the anodic aluminum oxide (AAO) porous membrane, in which pore diameter was 20 nm, 100 nm and 200 nm. Those conductive polymers were grown from pore inner surface of AAO membrane forming hollow tubes and then wire structures were formed after 3 hour polymerization. By removing AAO membrane templates using sodium hydroxide solution, the conductive polymer nano-wires were successfully obtained, of which diameter and length were close to the ones of nano-pores in AAO membrane template. Crystallinity and thermal stability of the conductive polymer nano-wires were higher than irregular ones that prepared by solution polymerization. Furthermore, the electrical resistance of conductive polymer nano-wires were reduced by about 4~60% compared with that of the irregular polymers prepared by solution polymerization.

• Composites Research
• /
• v.23 no.3
• /
• pp.31-36
• /
• 2010

A new material, carbon-nanofiber/polypyrrole (CNF/PPy) composite films, with different CNF weight ratios were fabricated electrochemically. Compared to the fabrication process based on simple physical mixing, the flexibility of the new film has been improved much better than the previous similar material. Pure PPy films were also fabricated by the new electrochemical process for the comparison of difference. Several SEM images were taken at two locations (electrode-side and solution-side) and at the cross section of the samples. Electrical conductivity of the composite films was measured by the four-probe method. The conductivity of the pure PPy film 0.013cm thick was 79.33S/cm. The CNF/PPy composite film with 5% CNF showed a conductivity of 93S/cm. One with 10% CNF showed a conductivity of 126 S/cm. The conductivity of PPy improves, as the CNF weight ratio increases. The good conductivity of CNF/PPy composites makes them a candidate for a small bending actuator. A bending sensor consists of PPy and PVDF, which can be operated in the air, was designed and the bending deflection was calculated using FEM.

• Journal of the Korea Organic Resources Recycling Association
• /
• v.30 no.2
• /
• pp.5-15
• /
• 2022

In this study, heated tobacco biomass was prepared as an active material for supercapacitor device. Retrieved tobacco leaf from the heated tobacco was carbonized at various temperature(800/850/950℃). Carbonized tobacco leaf material synthesized at 850℃ exhibited the highest C/O ratio, indicating the finest carbon quality. In addition, polypyrrole was coated onto the carbonized leaf material for increasing the electrochemical performance via low-temperature polymerization method. As-synthesized carbonized leaf material at 850℃(CTL-850)-based electrode and polypyrrole-coated carbonized leaf material(CTL-850/PPy)-based electrode displayed outstanding specific capacitances of 100.2 and 155.3F g^-1 at 1 A g^-1 with opertaing window of -1.0V and 1.0V. Asymmetric supercapacitor device, assembled with CTL-850 as the negative electrode and CTL-850/PPy as the positive electrode, manifested specific capacitance of 31.1F g^-1(@1 A g^-1) with widened operating voltage window of 2.0V. Moreover, as-prepared asymmetric supercapacitor device was able to lighten up the RED Led (1.8V), suggesting the high capacitance and extension of operating voltage window. The result of this research may help to pave the new possibility toward preparing the effective energy storage device material recycling the biomass.

• Journal of the Korean Electrochemical Society
• /
• v.5 no.3
• /
• pp.143-152
• /
• 2002

The growth of Polypyrrole film has been investigated during electropolymerization in an aqueous solution on bare and SAM modified gold electrodes by in-situ EQCM and ex-situ AFM. According to the result of cyclic voltammetry measurements, in the case of a bare gold electrode, the electrochemical deposition of polypyrrole were dependent on the limiting oxidative potential, but not on scan numbers. When the limiting potential higher than 0.8 V was applied on the electrode, the amount of polypyrrole deposited on a gold electrode was rapidly increased and the abnormal mass change attributed to the rearrangement of polypyrrole films was observed as the scan number increased. The polypyrrole film Prepared on electrodes modified with 1-dodecanethiol SAM or thiophene SAM grew 3-dimensionally with the rearrangement of film. However, in the case of BPUS SAM, 2-dimensional layer-by-layer growth of film was observed without the rearrangement of film. AFM images showed films with chain-shaped and/ or donut-shaped polymers when grown rapidly and a wrinkled film at the steady state condition.

• Journal of the Korean Electrochemical Society
• /
• v.8 no.2
• /
• pp.99-105
• /
• 2005

In this study, the $PPy/CLO_4$ and PPy/PVS composite electrodes were prepared at various polymerization potential by incorporating electrolyte anions of different anion size during constant potential polymerization. The reulting Polypyrrole surfaces were inspected by SEM, and their electrochemical Properties were investigated with CV and ac impedance method. The results of electrochemical analysis were suggested that anion for $PPy/CLO_4$ electrode and cation fir PPy/PVS electrode were transferred during redox reaction. As constant potential of polymerization was increased, the charge transfer resistance of $PPy/CLO_4$ and PPy/PVS was decreased and the electric double layer capacitances of $PPy/CLO_4$ was higher than that of PPy/PVS. The change of PPy/PVS surface was relatively smaller than that of $PPy/CLO_4$ according to electropolymerization potential.