• The Korean Journal of Rheology
• /
• v.6 no.2
• /
• pp.96-103
• /
• 1994

열방성 액정 고분자인 백트라와 폴리페닐렌 설파이드와의 블렌드를 주사전자현미경, 시차주사 열분석기, 그리고 모세관 레오미터를 이용하여 전 조성 범위에 대하여 연구하였다. 블렌드의 결정화와 용융에 관한연구결과로부터 두 고분자 사이에는 상호작용이 없음을 알수 있다. 이는 두 개의 상이 완전히 분리되기 때문이다. 폴리페닐렌설파이드를 많이 포함하고 있는 블렌드의 점도는 상당히 감소되었으며 이는 높은 전단속도에서 열방성 액정 고분자가 섬유구조를 갖기 때문이다. 열방성 액정고분자의 섬유구조는 열방성 액정 고분자가 섬유구 조를 갖기 때문이다. 열방성 액정 고분자의 섬유구조는 열방성 액정 고분자와 등방성상과의 점도비와 전단속도에 의해 영향을 받음을 알수 있다.

• Composites Research
• /
• v.33 no.3
• /
• pp.91-100
• /
• 2020

Polyphenylene sulfide (PPS) is a semi-crystalline engineering thermoplastic resin that has outstanding thermal stability, mechanical strength, inherent flame retardancy, chemical resistance, and electrical properties. Due to these outstanding properties, it is preferred as a matrix for composite materials. Many studies have been conducted to produce composites with carbon fibers and glass fibers to improve mechanical properties and provide functionality of PPS. In this review paper, we report a brief introduction to the fabrication and applications of PPS composites with carbon nanotubes, graphene, carbon fibers, and glass fibers.

• Polymer(Korea)
• /
• v.38 no.6
• /
• pp.791-800
• /
• 2014

4-Chlorobenzoyl (CB) group-attached multi-walled carbon nanotube (c-MWNT) was prepared via a direct Friedel-Crafts acylation of MWNT with 4-chlorobenzoic acid (CBA) in a $P_2O_5$/poly(phosphoric acid) medium. c-MWNT with a maximum chlorine content of 5.3 wt% (CB group content of 20.9 wt%) was obtained by controlling the amount of CBA during the reaction. Using a self-condensation polymerization of 4-chlorobenzenethiol (CBT) to poly(phenylene sulfide) (PPS), MWNT-g-PPS was prepared by adding c-MWNT of chlorine content of 5.3 wt% during the self-polymerization of CBT and removing homo PPS after polymerization in order to increase the interfacial interaction between PPS and MWNT. Thermal and surface properties of the MWNT-g-PPS were characterized. The results showed that PPS was formed on the surface of c-MWNT by the condensation of c-MWNT and CBT.

• Proceedings of the Membrane Society of Korea Conference
• /
• 2008.05a
• /
• pp.158-161
• /
• 2008

• Polymer(Korea)
• /
• v.30 no.1
• /
• pp.85-89
• /
• 2006

The effect of vapor grown carbon fiber (VGCF) contents on electrical and rheological properties of VGCF filled polyphenylene sulfide (PPS) composites prepared through melt mixing using a twin screw exruder was studied. This method was proved to be quite effective to produce good dispersion of VGCF in the matrix even for highly filled PPS. From the dependence of the electrical conductivity on VGCF content, the percolation phenomena began to occur above $10\;wt\%$. While there is only a marginal increase of viscosity for 1 and $5\;wt\%$ VGCF filled PPS, the composites containing $10\;wt\%$. While VGCF showed abrupt increase in viscosity as well as flattening of frequency vs modulus curve, indicating a transition from a liquid-like to a solid-like behavior due to the creation of VGCF network. This result agrees well to the fact that the network formation in the composite can be composite by rheological property dependence on filler content as well as by electrical conductivity measurement.

• 한국신재생에너지학회:학술대회논문집
• /
• 2009.11a
• /
• pp.172-175
• /
• 2009

A bipolar plate is an important component in a fuel cell in the sense of cost and weight. This study aimed at developing highly conductive, lightweight, and low cost bipolar plates. Hybrid carbons filled poly(phenylene sulfide)(PPS) composite bipolar plates were prepared by using the compression molding technique. Various types and amounts of conducting carbon fillers such as graphite, carbon black, carbon fibers, and carbon nanotubes (CNTs) were adopted for the composites. Electrical conductivity and mechanical properties of the composites were measured in order to investigate effects of each components of fillers. When the graphite is only used as a conducting filler, the electrical conductivity of the composites increases with increasing the content, but the flexural strength decreases dramatically. However, for CNTs and carbon fibers, the flexural strength initially increases and then decreases with increasing the amount of the conducting fillers. The amount of graphite corresponding to the peak of flexural strength was moved to lower content with increasing the amount of CNTs or carbon fiber. When hybrid conducting fillers such as fibrous and particulate fillers were used, the synergy effect in mechanical and electrical properties was observed.

• Transactions of the Korean Society of Automotive Engineers
• /
• v.25 no.1
• /
• pp.35-41
• /
• 2017

The use of engineering plastics in automotive components is increasing with the trend towards improving the car strength and reducing weight. Among the different choices of materials, engineering plastic emerged as the necessary material for achieving lower costs, reduced weight and improved production efficiency. To produce the automotive parts, it is important to predict defect and validation of injection molding prior to design. Injection molding analysis and structural analysis are widely applied as a part of the design process when developing automotive parts. Injection molding analysis, in particular, involves a highly complicated mechanism that requires deep knowledge of polymer properties as well as an analytic approach different from that used for a general isotropic material when the molded material is used as a structural material. This is because the parts made of polymer have pre-stress factors such as intrinsic deformation and residual stress. The most important factors for injection molded plastic products are injection molding condition and cavity design, taking into account ease of molding, mass production and application. Despite optimal injection molding conditions and cavity design, however, glass fiber orientation is critically linked to strength reduction. The application of injection molding and structural coupled analysis provides a low-cost solution for product molding and structural validation, all prior to the actual molding. The purpose of this study involves the validation, pre-study, and solution of defect in injection-molded polymer automotive parts using the simulation software for injection molding and structural coupled analysis. Finally, this thesis provides validation of an injection molding and structural coupled analytic mechanism that can demonstrate the effect of glass fiber orientation on mechanical strength. Design improvement ideas for the injection molded product of PPS (Poly Phenylene Sulfide)+40% glass fiber are also suggested.

• Polymer(Korea)
• /
• v.37 no.3
• /
• pp.405-410
• /
• 2013

The effect of styrene-ethylene/butylene-styrene (SEBS) on the blend of polyphenylene sulfide (PPS) and polyethylene terephthalate (PET) was investigated. The blends were extruded by a single screw extruder equipped with a Maddock mixing screw, and their molded properties were examined. After the binary blends were prepared on the whole compositions of PPS/PET (80/20, 60/40, 40/60, 20/80), the thermal, rheological, mechanical properties and morphology of the blends were analyzed. The results showed the significant decline in the properties of the blends owing to the incompatibility between PPS and PET phases. As a basic blend composition, the PPS/PET (40/60) blend was selected by considering cost efficiency. To this basic blend, SEBS was added as a compatibilizer. With increasing SEBS addition, the mechanical properties were improved. From the domain size reduction observed in morphology, it might be due to the enhancement of compatibility between linear PPS and PET phases by addition of SEBS.

• Polymer(Korea)
• /
• v.37 no.4
• /
• pp.500-506
• /
• 2013

The effect of compatibilizer types on the properties of polyphenylene sulfide (PPS)/polyethylene terephthalate (PET) blends was investigated. The blends were extruded by a single screw extruder attached with a Maddock mixing zone and their molded properties were examined. As a basic blend composition, a linear PPS/PET (40/60) blend was selected based on cost efficiency. Three types of compatibilizer, SEBS, modified SEBS, and modified PS were added to the basic blend to improve the properties. The thermal, rheological, mechanical properties and the morphology of the ternary blends were analyzed. The maximum mechanical properties of blends was found at 1 phr of m-SEBS or m-PS content, whose values were almost the same as the theoretical values of miscible blend system. It seemed to by the case that the partial reaction between compatibilizer and the basic blend caused the enhancement of compatibility between linear PPS and PET phases. These ternary blends would be applicable as economic linear PPS alloys.