• Journal of Biomedical Engineering Research
• /
• v.19 no.3
• /
• pp.215-224
• /
• 1998

This paper is fundamental study to develope the extracorporeal liver support system for patient with fulminant hepatic failure(FHF) or being expected for orthotopic liver transplantation. The polyurethane foam, which is composed of the density of 33kg/m3, the average pore diameter of 500${\mu}{\textrm}{m}$, the closed window of 60-70%, was manufactured with the prepolymer of 15% NCO-, Hepatocytes were inoculated to form spheroids in polyurethane foam. The time of spheroid formation in BSA(Bovine Serum Albumin) coated polyurethane foam was shorter than that in raw polyurethane foam. To verify the function of hepatocyte spheroids, we measured ammonia removal rate, urea and albumin secretion rate. Polyurethane foam was suitable for culture of hepatocyte spheroids. And culture of hepatocyte spheroids in polyurethane foam has high possibility in using as an extracorporeal liver support system.

• Proceedings of the Korea Institute of Fire Science and Engineering Conference
• /
• 2011.04a
• /
• pp.16-19
• /
• 2011

본 논문은 건축물 내장재로 사용되는 폴리우레탄폼 및 스티로폼의 연소특성에 관하여 연구하였다. 연소특성 평가를 위하여 폴리우레탄폼 및 스티로폼을 대상으로 연소실험을 수행하였으며, 건축용 내장재 사용의 적합성 평가를 위하여 콘칼로리미터법을 이용한 열방출률 및 연기밀도를 측정 분석하였다. 연소특성 실험 결과, 일반 재질의 폴리우레탄폼은 착화와 동시에 급속히 연소되는 특성을 나타내었으며, 난연 처리된 폴리우레탄폼은 착화와 동시에 자체적으로 소화되는 특성을 나타내었다. 스티로폼은 착화 이후 서서히 연소 확대되며, 이후에는 가장 격렬히 연소되는 특성을 나타내었다. 방출률 및 연기밀도는 한국산업규격 KS F ISO 5660-1 및 국제해사기구의 FTP Code를 만족하지 못하는 것으로 평가되었으며, 이러한 결과로 볼 때, 폴리우레탄폼 및 스티로폼은 건축용 내장재로 사용하기 부적합한 것으로 판단된다.

• Journal of the Korean Institute of Gas
• /
• v.17 no.1
• /
• pp.35-41
• /
• 2013

In this study, flame retardancy of polyurethane foam and phenolic foam were investigated by addition of phosphorous flame retardants. The thermal degradation behavior of polyurethane foam and phenolic foam in the presence of flame retardants has been studied by thermogravimetric analysis(TGA). Heat release rate(HRR), mean HRR, mass loss rate(MLR), total smoke released(TSR) and limited oxygen index(LOI) were tested by cone calorimeter. From the test results, Phenolic foam showed low HRR, MLR and TSR than polyurethane foam.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.15 no.6
• /
• pp.3435-3441
• /
• 2014

A dynamic modeling and prediction of polyurethane foam material, which is used as the seat in vehicles is very important for improving the ride quality of vehicle occupants. In this study, parameters to define the nonlinear stiffness and time-variant characteristics of the viscoelasticity of polyurethane foam were obtained using a static compression test. Polynomial functions and convolution integral were used to model the nonlinear and viscoelastic characteristics of polyurethane foam mathematically. The dynamic behaviors excited by the seat floor displacement were analyzed using a numerical integration method for the nonlinear vibration model. As a result, the viscoelastic characteristics of polyurethane foam was found to be an important parameter for improving the ride quality.

• Fire Science and Engineering
• /
• v.20 no.4 s.64
• /
• pp.110-115
• /
• 2006

Polyurethane(PU) was mixtured by the treatment with flame retardants such as Tri(chloroisopropyl) phosphate(TCPP), Triethyl phosphate(TEP) and Trimethyl phosphate(TMP) at about $90^{\circ}C$. Rigid polyurethane foam was produced using the mixured products as flame retardants. The mechanical property and flammability of rigid polyurethane was investigated. The mixtured polyurethane shows reduced flammability over virgin polyurethane. Mechanical strength of mixtured polyurethane also shows as high as that of virgin polyurethane. In order to evaluate flame retardant properties of the mixtured polyurethane foams, heat release rate(HRR) of the foam was measured by cone calorimeter. Scanning electron micrograph of mixtured PU shows uniform cell morphology as virgin PU.

• Elastomers and Composites
• /
• v.43 no.2
• /
• pp.124-132
• /
• 2008

Thermal and mechanical properties of flexible polyurethane foam modified by urushiol and cardanol which have been known to be antibiotic were investigated. It was observed from FT-IR spectra analysis that the urushiol reacted with isocyanate was participated in synthesis of polyurethane. It was also seen that the modification using urushiol and cardanol made the PU more thermally stable without deterioration of mechanical properties. The modified PU foams showed increased antibacterial properties compared with neat PU foam.

• Journal of the Computational Structural Engineering Institute of Korea
• /
• v.29 no.5
• /
• pp.437-445
• /
• 2016

Recently, polyurethane foam has been used in various industry fields to preserve temperature environment of structures, and a wide range of loads from the static to the dynamic are imposed on the material during a life period. The biggest characteristic of polyurethane foam is porosity as being polymeric material, and it is generally known that insulation performance of the material strongly depends on internal void size. In addition, polyurethane foam's mechanical behavior has high dependence on strain rate and temperature as well as being highly non-linear ductile for compression. In the non-linear compressive behavior, volume fraction of voids and elastic modulus decrease as strain increases. Therefore, in this study, temperature-dependent viscoplastic-damage constitutive model was developed to describe the non-linear compressive behavior with the aforementioned features of polyurethane foam.

• Journal of the Computational Structural Engineering Institute of Korea
• /
• v.28 no.5
• /
• pp.543-551
• /
• 2015

Polyurethane Foam(PUF), a outstanding thermal insulation material, is used for various structures as being composed with other materials. These days, PUF composed with glass fiber, Reinforced PUF(R-PUF), is used for a insulation system of LNG Carrier and performs function of not only the thermal insulation but also a structural member for compressive loads like a sloshing load. As PUF is a porous material made by mixing and foaming, mechanical properties depend on volume fraction of voids which is a dominant parameter on density. Thus, In this study, density is considered as the effect parameter on mechanical properties of Polyurethane Foam, and mechanical behavior for compression of the material is described by using modified Gurson damage model.

• Fire Science and Engineering
• /
• v.34 no.2
• /
• pp.7-13
• /
• 2020

In this study, water glass was applied as a coating material to a rigid polyurethane foam to improve the flame-retardant properties of the foam. The heat release rate of the cone calorimeter of the urethane foam, in which the inorganic water-glass coating layer was applied, decreased rapidly. The water glass coated on the polyurethane surface formed a glassy foam by foaming with water, which did not escape during the vitrification reaction when the foam or glass was heated. The glassy foam formed on the polyurethane foam became a fire-resistant insulation layer that inhibited the combustion of the polyurethane foam for more than 10 min. Water glass was found to improve the flame-retardant properties of the rigid polyurethane foam.

• Applied Chemistry for Engineering
• /
• v.22 no.5
• /
• pp.540-544
• /
• 2011

Novel phosphrous flame retardant tetramethylene bis(orthophosphorylurea) (TBPU) was synthesized by the reaction of diphosphoric acid with 1,4-butanediol and urea, and charaterized by Fourier transform infrared spectroscopy (FT-IR). As the amount of TBPU added in polyurethane foam (PUF) was increased, the flame retardancy of PUF was increased and the mechanical properties were not decreased. Also, in the flame resistance test after the reduced pressure storage, the flame retardancy of TBPU added PUF was retained. We could find out that the thermal resistance of TBPU added PUF increased compared to that of pure PUF.