• Journal of the Korean Institute of Gas
• /
• v.26 no.1
• /
• pp.34-40
• /
• 2022

Gas cylinder cabinets have risks such as cylinder explosion and scattering of debris when a fire occurs. These risks are likely to cause gas spills and cause secondary damage. In order to reduce damage, it is very important to secure the fire resistance performance of the gas cylinder cabinet. In foreign countries, NFPA codes in the United States and EN-14470-2 in Europe stipulate fire resistance test standards for gas cylinder cabinets to protect internal cylinders for a certain period of time in a situation where gas cylinder cabinets are exposed to flames. However, in Korea, only internal pressure performance and airtight performance standards are specified, and the target is limited to piping, and research and regulations for the fire resistance performance of gas cylinder cabinets are insufficient compared to overseas. Therefore, in this study, finite element analysis was used to establish fire resistance standards for domestic gas cylinder cabinets. In the event of a fire, optimal conditions are derived in terms of structure and material.

• Journal of the Korean Society of Marine Environment & Safety
• /
• v.27 no.2
• /
• pp.355-362
• /
• 2021

To facilitate low-pressure selective catalyst reduction (L.P SCR), a high exhaust-gas temperature of a four-stroke diesel engine for a ship's generator is required. This study aimed at reducing the exhaust-gas temperature by adjusting the valve open-close timing and fuel injection timing to satisfy the operating conditions of L.P SCR and prevent accidents associated with the generator engine due to high temperature. To lower exhaust-gas temperature, the angle of the camshaft was adjusted and the shim of the fuel injection pump was added. As a result, the maximum explosion pressure increased and the average of the turbocharger outlet temperature dropped. Considering the heat loss from the turbocharger outlet to the SCR inlet, the operation condition for L.P SCR was satisfied with 290 ℃. The study demonstrates that safe operation of a diesel generator can be achieved by lowering the exhaust-gas temperature.

• Korean Chemical Engineering Research
• /
• v.52 no.4
• /
• pp.467-474
• /
• 2014

Preliminary design in chemical process furnishes economic feasibility through calculation of both mass balance and energy balance and makes it possible to produce a desired product under the given conditions. Through this design stage, the process possesses unchangeable characteristics, since the materials, reactions, unit configuration, and operating conditions were determined. Unique characteristics could be very economic, but it also implies various potential risk factors as well. Therefore, it becomes extremely important to design process considering both economics and safety by integrating process simulation and quantitative risk analysis during preliminary design stage. The target of this study is LNG liquefaction process. By the simulation using Aspen HYSYS and quantitative risk analysis, the design variables of the process were determined in the way to minimize the inherent explosion risks and operating cost. Instead of the optimization tool of Aspen HYSYS, the optimization was performed by using stochastic optimization algorithm (Covariance Matrix Adaptation-Evolution Strategy, CMA-ES) which was implemented through automation between Aspen HYSYS and Matlab. The research obtained that the important variable to enhance inherent safety was the operation pressure of mixed refrigerant. The inherent risk was able to be reduced about 4~18% by increasing the operating cost about 0.5~10%. As the operating cost increases, the absolute value of risk was decreased as expected, but cost-effectiveness of risk reduction had decreased. Integration of process simulation and quantitative risk analysis made it possible to design inherently safe process, and it is expected to be useful in designing the less risky process since risk factors in the process can be numerically monitored during preliminary process design stage.

• Journal of the Korea Concrete Institute
• /
• v.25 no.5
• /
• pp.485-496
• /
• 2013

In recent years, frequent terror or military attacks by explosion or impact accidents have occurred. Examplary case of these attacks were World Trade Center collapse and US Department of Defense Pentagon attack on Sept. 11 of 2001. These attacks of the civil infrastructure have induced numerous casualties and property damage, which raised public concerns and anxiety of potential terrorist attacks. However, a existing design procedure for civil infrastructures do not consider a protective design for extreme loading scenario. Also, the extreme loading researches of prestressed concrete (PSC) member, which widely used for nuclear containment vessel, gas tank, bridges, and tunnel, are insufficient due to experimental limitations of loading characteristics. To protect concrete structures against extreme loading such as explosion and impact with high strain rate, understanding of the effect, characteristic, and propagation mechanism of extreme loadings on structures is needed. Therefore, in this paper, to evaluate the impact resistance capacity and its protective performance of bi-directional unbonded prestressed concrete member, impact tests were carried out on $1400mm{\times}1000mm{\times}300mm$ for reinforced concrete (RC), prestressed concrete without rebar (PS), prestressed concrete with rebar (PSR, general PSC) specimens. According to test site conditions, impact tests were performed with 14 kN impactor with drop height of 10 m, 5 m, 4 m for preliminary tests and 3.5 m for main tests. Also, in this study, the procedure, layout, and measurement system of impact tests were established. The impact resistance capacity was measured using crack patterns, damage rates, measuring value such as displacement, acceleration, and residual structural strength. The results can be used as basic research references for related research areas, which include protective design and impact numerical simulation under impact loading.

• Journal of the Korea Concrete Institute
• /
• v.24 no.3
• /
• pp.293-303
• /
• 2012

Recently, as construction technology improved, concrete structures not only became larger, taller and longer but were able to perform various functions. However, if extreme loads such as impact, blast, and fire are applied to those structures, it would cause severe property damages and human casualties. Especially, the structural responses from extreme loading are totally different than that from quasi-static loading, because large pressure is applied to structures from mass acceleration effect of impact and blast loads. Therefore, the strain rate effect and damage levels should be considered when concrete structure is designed. In this study, the low velocity impact loading test of steel fiber reinforced concrete (SFRC) slabs including 0%~1.5% (by volume) of steel fibers, and strengthened with two types of FRP sheets was performed to develop an impact resistant structural member. From the test results, the maximum impact load, dissipated energy and the number of drop to failure increased, whereas the maximum displacement and support rotation were reduced by strengthening SFRC slab with FRP sheets in tensile zone. The test results showed that the impact resistance of concrete slab can be substantially improved by externally strengthening using FRP sheets. This result can be used in designing of primary facilities exposed to such extreme loads. The dynamic responses of SFRC slab strengthened with FRP sheets under low velocity impact load were also analyzed using LS-DYNA, a finite element analysis program with an explicit time integration scheme. The comparison of test and analytical results showed that they were within 5% of error with respect to maximum displacements.

• Proceedings of the Materials Research Society of Korea Conference
• /
• 2011.10a
• /
• pp.38.2-38.2
• /
• 2011

폴리머 박막은 그 고유한 특성으로 인해 여러 산업적으로 널리 사용되고 있는 재료이다 예로 의약품이나 식품 포장지의 배리어, 전자부품의 절연체, 반도체 공정에서의 사용, 혹은 부식방지를 위해 사용 되어지기도 한다. 이 폴리머 박막을 증착 하기 위한 방법으로 이전부터 CVD (Chemical Vapor Deposition) 방법이 많이 사용되었고 지금까지도 가장 많이 사용되는 방법이다. CVD를 사용하여 $SiO_2$-like 필름의 증착은 전구체(precursor)로 Silane ($SiH_4$)을 사용하였으며, 플라즈마 발생 소스(source)로 열 혹은 전기장 등을 사용 하며 공정 시 압력 또한 대부분 저압 하에서 실시 하였다. 이와 같은 이전 CVD 방법의 문제는 사용되는 Silane 자체가 인체에 해로울 정도로 독성이 있으며 폭발성도 같이 가지고 있어 작업환경의 위험성이 높으며 열을 사용한 CVD의 경우 높은 공정 온도로 인해 증착 할 수 있는 대상이 제한 되어 지며 높은 열의 발생을 위해 많은 에너지의 소비가 필요하다. 저압 플라즈마를 사용한 CVD 는 공정상 높은 열의 발생이 일어나지 않아 기판 운용상 문제가 되지 않지만 저압 환경에서 해당 공정이 이루어기 때문에 인해 필수적으로 고가의 진공 챔버가 필수적이며 저압을 유지할 고가의 진공 펌프나 추가 장비들이 필요하게 된다, 또한 챔버 내에서 이루어지는 공정으로 인해 공정의 연속성이 떨어져 시잔비용 또한 많이 잡아 먹는다. 이러한 열 혹은 저압 플라즈마등을 사용한 공정의 단점을 해결하기 위해 여러 연구자들이 다양한 방법을 통해 연구를 하였다. 대기압 유전체 배리어 방전(AP-DBD: Atmospheric Pressure-Dielectric Barrier Discharge)을 사용한 폴리머 박막의 증착은 이전 전통적인 방법에 비해 낮은 장비 가격과 낮은 공정 온도 그리고 연속적인 공정 등의 장점이 있는 폴리머 박막 증착 방법 이다. 대기압 유전체 배리어 방전 공정 변수로 공급 전압 및 주파수 그리고 공급 전압의 영향, 전구체를 유전체 배리어 방전 전극으로 이동 시키기 위해 사용된 캐리어 가스의 종류 및 유량, 화학양론적 계수를 맞추기 위해 같이 포함되는 산소 가스의 유량, DBD 전극의 형태에 따른 증착 박막의 균일성 등 이 존재하며 이런 많은 변수 들에 대한 연구가 진행 되었지만 아직 이 대기압 DBD를 이용한 폴리머 박막의 증착에 대한 명확한 이해는 아직 완전 하다 할 수 없다. 본 연구에서는 이러한 대기압 DBD를 이용하여 폴리머 박막의 증착시 영향을 미치는 많은 공정 변수 등이 박막생성에 미치는 영향과 증착된 박막의 성질에 대한 연구를 진행 하였다.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.18 no.3
• /
• pp.209-214
• /
• 2017

Most of the present potential transformers of train vehicles are of the oil-type filled with insulating oil and are susceptible to problems such as explosion due to the increase in the internal pressure during train operation and poor reliability near the end of their life cycle. As a solution to this problem, it is necessary to develop a molded dry-type potential transformer with excellent pressure-resistance performance using insulating resin. In order to localize the product, the Korea Railroad Research Institute has been developing a molded dry-type potential transformer. As part of this research, it is necessary to analyze the vibration characteristics of the developed product and to check the transformer performance in a vibration environment. In this study, a resonance test and simulated long-term life test of the developed product were conducted according to the KS R 9144 and IEC 61373 standards, respectively, which are vibration test methods for railway vehicle parts. Their natural frequencies were analyzed by comparing the results of the numerical modal analysis and resonance test, in order to confirm their adherence to the standards. Also, the performance test after the simulated long-term life test confirmed that the operation of the developed transformer was not problematic even in a long-time vibration environment.

• Journal of the Korea Society of Computer and Information
• /
• v.17 no.7
• /
• pp.129-138
• /
• 2012

Despite of increasing pressure of opening to free for medical market by an advanced nation and increasing number of portal websites for health information, there have been few studies on the issues of enhancing the service quality of health information websites. The survey exhibited that the quality factors mainly affect significant and satisfied level of health information websites were usability, information structure and contents, interaction, and revisiting. This study was conducted to develop the consumer-focused quality factor of health information websites using WebQual model which was valued at efficient evaluation tool for this information system The methods taken in this research was to survey quality factors for significant and satisfied level of 323 consumers live in Chungcheong-do which is based on 48 questionnaires of WebQual quality factors. Our research extracted quality factors, usability, information quality (information structure and contents), interaction (personalisation and privacy) about view of criticality and satisfaction and relevant degree of revisiting. The research results presented in the paper will provide an efficient way of installing healthcare websites, moreover stone toward a marketing strategy for the consumer focus website provides under fierce competition.

• Applied Chemistry for Engineering
• /
• v.31 no.2
• /
• pp.153-163
• /
• 2020

Compared to gaeous hydrogen, liquid hydrogen has approximately 1/800 volume, 800 times higher volumetric energy density at the same pressure, and the advantage of lower explosion risk and easier transportation than gaseous hydrogen. However, hydrogen liquefaction requires larger scale facility investment than simple compression storage method. Therefore, the research on energy-saving hydrogen liquefaction processes is highly necessary. In this study, helium/neon (mole ratio 80 : 20) refrigeration cycle was investigated as the main refrigeration process for hydrogen liquefaction. Process simulation for less energy consumption were carried out using PRO/II with PROVISION V10.2 of AVEVA. For hydrogen liquefaction, energy consumption was compared in three cases: Using a helium/neon refrigerant cycle, a SMR+helium/neon refrigerant cycle, and a C3-MR+helium/neon refrigerant cycle. As a result, the total power consumptions of compressors required to liquefy 1 kg of hydrogen are 16.3, 7.03 and 6.64 kWh, respectively. Therefore, it can be deduced that energy usage is greatly reduced in the hydrogen liquefaction process when the pre-cooling is performed using the SMR process or the C3MR process, which have already been commercialized, rather than using only the helium/neon refrigeration cycle for the hydrogen liquefaction process.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.18 no.4
• /
• pp.718-725
• /
• 2017

A liquid storage tank is one of the most important structures in industrial complexes dealing with chemicals, and its structural damage due to an earthquake may cause a disastrous event such as the leakage of hazardous materials, fire, and explosion. It is thus essential to assess the seismic fragility of liquid storage tanks and prepare for seismic events in advance. When a liquid storage tank is oscillated by a seismic load, the hydrodynamic pressure caused by the liquid-structure interaction increases the stress and causes structural damage to the tank. Meanwhile, the seismic fragility of the structure can be estimated by considering the various sources of uncertainty and calculating the failure probabilities in a given limiting state. To accurately evaluate the seismic fragility of liquid storage tanks, a sophisticated finite element analysis is required during their reliability analysis. Therefore, in this study, FERUM-ABAQUS, a recently-developed computational platform integrated with commercial finite element and reliability analysis software packages, is introduced to perform the finite element reliability analysis and calculate the failure probability of a liquid storage tank subjected to a seismic load. FERUM-ABAUS allows for automatic data exchange between these two software packages and for the efficient seismic fragility assessment of a structure. Using this computational platform, the seismic fragility curve of a liquid storage tank is successfully obtained.