• Journal of Mushroom
• /
• v.11 no.4
• /
• pp.292-296
• /
• 2013

Recently, Pleurotus eryngii, King oyster mushroom is the main export item in South Korea mushroom industry. For appropriate transportation to Europe and USA markets, it is necessary to elucidate suitable conditions of storage and treatment of post-harvest during long time shipping. Whole mushrooms were packed with polypropylene anti-fog film (30 um) without trimming. The range of package weight and oxygen permeability of film were 200 g~400 g and 2000~5000 $cc/m^2$, 24 h,atm, respectively. The weight loss ratio was increased with increasing storage time. There were no big differences in weight loss ratio according to package weight and oxygen permeability of film at low temperature storage($4^{\circ}C$). In case of package weight is 400 g and oxygen permeability of film is 3000 $cc/m^2$, 24 h, atm. As a results of freshness, the optimum packing weight and oxygen permeability of film of P. eryngii were 400 g and below 2,000 $cc/m^2$, 24 h, atm, respectively.

• Food Science and Preservation
• /
• v.15 no.1
• /
• pp.1-8
• /
• 2008

Quality attributes of fresh-cut pak-choi (Brassica campestris var. chinensis) as affected by hydrocooling and packing were investigated in terms of weight loss, respiration, vitamin C content, total chlorophyll content, microbial load and sensory properties during storage at 4 and $10^{\circ}C$. Fresh pak-choi was trimmed and washed with cold water $(1^{\circ}C)$ as well as tap water $(6^{\circ}C)$ for 30 sec 3 times and then packaged in PP (polypropylene) film bag and PETE (polyethylene terephthalate) bay, and stored for 9 days at 4 and $10^{\circ}C$. Weight loss was decreased by washing and packing generally. Respiration rate was increased slowly over the storage at $4^{\circ}C$. Vitamin C content and total chlorophyll contents of pak-choi packaged within PETE bay decreased gradually during storage. Hydrocooling and packing within PETE bay treatments resulted in approximately 1-2 log CFU/g reduction of microbial load.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.26 no.4D
• /
• pp.593-600
• /
• 2006

Joint opening of jointed concrete pavement is caused by change in temperature and humidity of adjoined slab. The magnitude of joint opening influences on the load-transfer-efficiency and the behavior of sealant. If temperature or humidity decreases, joint opening increases. Generally maximum joint opening of a given joint is predicted by using AASHTO equation. While different magnitudes of joint opening at the individual joints have been observed in a given pavement section, AASHTO equation is limited to predict average joint opening in a given pavement section. Therefore the AASHTO equation may underestimate maximum joint for the half of joint in a given pavement section. Joints showing larger opening than the designed may experience early joint sealant failure, early faulting. Also unexpected spalling may be followed due to invasion of fine aggregate into the joints after sealant pop-off. In this study, the variation of the joint opening in a given pavement section was investigated based on the LTPP SMP data. Factors affecting on the variation are explored. Finally a probabilistic joint opening model is developed. This model can account for the reliability of the magnitude of joint opening so that the designer can select the ratio of underestimated joint opening.

• International Journal of Highway Engineering
• /
• v.11 no.2
• /
• pp.37-44
• /
• 2009

Currently the reasonability of threshold values for rutting and cracking does not clearly defined at the Pavement Rehabilitation Decision Tree on national highway PMS(Pavement Management System). The goal of this study is to provide the reasonable threshold values for the national highway asphalt concrete pavement rehabilitation. To achieve this goal, test section that represents typical asphalt concrete pavement of national highway was selected and pavement export were participated. Pavement condition survey has been conducted and pavement performance data at the selected roadway section were analyzed. From this study, reasonable threshold values of Pavement Rehabilitation Decision Tree were suggested based on the pavement expert's engineering judgement. In terms of crack repairs, the application of overlay after cutting is required to deteriorated area where existing crack ratio is over 35% and just overlay is required to where crack ratio is over 20%. On rutting, rut depth over 13mm is required to overlay after cutting and rut depth over 10mm is just needed to overlay.

• Food Science and Preservation
• /
• v.10 no.1
• /
• pp.37-40
• /
• 2003

Coptis chinensis extract and grapefruit seed extract, natural antimicrobial substances, were applied to the dipping treatment of strawberry and incorporated in the packaging films. Strawberry was steeped in the extract solutions of 50 ppm concentration and packed with the low density polyethylene(LDPE) films incorporated with 1% extracts. During the storage at 5$^{\circ}C$, the qualities of microbial counts, awぶy ratio, texture and chemical attributes were measured for the pretreated strawberry. The LDPE films incorporated with the extracts retarded the growth of aerobic bacteria, lactic acid bacteria and yeast that had been contaminated before the pretreatment, significantly lowed the decay ratio, and gave better retention of textural firmness. The chemical and physical qualities of strawberry were not affected by the packaging films. When strawberry was steeped in the extract solutions, the effects of the packaging film incorporated with the extracts on the qualities of strawberry were accelerated.

• Food Science and Preservation
• /
• v.10 no.1
• /
• pp.23-27
• /
• 2003

This study was conducted to develop the corrugated fiberboard box which is suitable to pre-cooling and low temperature distribution of chinese cabbage Consider from a cooling performance viewpoint, the folding type box with 5.4% vent hole ratio was most efficient for fast cooling and even temperature distribution in the packaging box. At the end of storage periods, the compressive strength of the folding type box was less than the bliss type box. However, the compressive strength of the folding type box after storage was higher than required safety compressive strength for long term storage. So the folding type box was considered to have no problems toy practical use. The shelf-life of the chinese cabbage packaged with the developed box was 6∼7 days which was 2∼3 days longer than usual packaging.

• Proceedings of the Plant Resources Society of Korea Conference
• /
• 2018.10a
• /
• pp.112-112
• /
• 2018

산마늘은 마늘과 같이 독특한 향이 있어 입맛을 돋우며 웰빙식품으로 3월 중순에서 5월초에 채취하여 생채로 쌍을 먹거나 김치, 절임으로 생산되어 판매된다. 산마늘의 부가가치 향상을 위하여 살균소독 세척과 소포장용 필름포장방법을 구명하고자 본 실험을 수행하였다. 산마늘을 살균소독 세척수(수돗물, 0.2% 구연산 침지 후 50% 에탄올 분무처리)로 2분 세척하고 원심탈수 후, 포장필름은 $30{\mu}m$ oriented polypropylene (OPP), $30{\mu}m$ OPP 필름을 기본재료로 산소투과율 $5,000cc/m^2{\cdot}day{\cdot}atm$ (OPP_5)로 조정한 필름, $30{\mu}m$ micro perforated polypropylene (MPP) 필름에 밀봉하고, $30{\mu}m$ OPP필름에 개봉 포장하여 $4^{\circ}C$에서 42일 저장하였다. 산마늘은 구연산 침지 후 에탄올 분무세척 후 세척 전 보다 일반세균수가 1.5 log CFU/g 감소되었으며 수돗물 세척 후는 0.1 log CFU/g 정도 감소하여 수돗물 보다 구연산 침지 후 에탄올 분무에 의해 균수 감소효과가 보다 컸으며 저장기간이 경과한 후에도 그러한 경향은 유지되었다. 저장 35일 후 세척수에 관계없이 OPP 개봉과 MPP 밀봉 포장에서 의해 산마늘의 황화율과 부패율이 높게 나타났으며 OPP 밀봉에서 이취 발생 지수가 OPP_5 밀봉보다 높게 나타났다. 세척 및 포장처리에 의한 종합선도의 제한요인은 황화, 이취 및 부패취 발생 지수로 이를 종합하였을 때 산마늘의 상품성 향상을 위하여 소포장 하는 경우 구연산 침지 후 에탄올 분무 방법으로 세척한 다음 원심탈수하여 OPP_5필름으로 포장하는 것이 품질 향상에 적합하였으며 40일 이상 저장이 가능한 것으로 나타났다.

• Korean journal of applied entomology
• /
• v.25 no.3 s.68
• /
• pp.175-182
• /
• 1986

A study was conducted to survey the fauna and the field density ofp lant parastic nematodes on important cash crops in Korea. Studies were carried out with sampling about five hundred grams of soil around roots of eighteen different kinds of crops from fifty five locations throughout the country. Nematodes were elutriated from over three thousand soil samples, and identified into sixteen different genera. Among them Ditylenchus species were found to be the most abundant in fields of garlic and onion, Helicoty-lenchus of sesame, chinese cabbage and mulberry, Meloidogyne of red-pepper, tomato, cucumber and peanut, Pratylenchus of mulberry and peach, Pratylenchus of apple, Chinese cabbage and radish, Trichodorus of potato, and Xiphinema of peach and potato. Field density of Meloidogyne species was increased with the longer continuous cultivation of red-pepper in the same field.

• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.41 no.3
• /
• pp.274-285
• /
• 1996

These experiments were conducted to evaluate the effects of seed coating with ten environmentally acceptable polymers, on germination percentage, water uptake, respiration, emergence and seedling growth characteristics. The water absorption of polymer-coated seeds in saturation condition was highest in klucel and lowest in polyvinyl pyrrolidone(PVP), and that in water was highest in klucel and lowest in maltrin. Respiration rates of polymer-coated seeds in Hwayoungbyeo and Ilpumbyeo were lower than those of none-coated seeds, and those in Daecheongbyeo and Jinmibyeo were higher than that of none-coated seeds, and those of sepiret coated seeds were higher than PVP coated seeds. The germination polimer-coated seed was reduced by one percentage by coating with seed coating machine. Germination percentage was not affected by any of polymer coating in high quality seed, but there were significant effects in low quality seed coating with waterlock, surelease 46 and sepiret significantly reduced germination some cultivars. Germination percentage after accelated ageing treatment were slightly higher most of polymer-coated seeds than in none-coated seeds, but those of sepiret-and klucel-coated seeds were lower significantly. Germination percentage of seeds coated with daran 8600, rnaltrin, sacrust and opadry were enhanced slightly under cold test other polimers reduced germination. The seedling height of polymer-coated seeds were longer than those of none-coated seeds, but those of waterlock, PVP and maltrin coating seeds were shorter, seedling hight was shortened by polimer coating under cold test. Polymer-coated seeds showed higher emergence percentage, shorter emergence time in field condition. The highest emergence percentage and the shortest emergence time was shown at 90% soil moisture content.

• International Journal of Highway Engineering
• /
• v.4 no.2 s.12
• /
• pp.9-18
• /
• 2002

The main distresses that influence pavement performance are rutting, fatigue cracking, and longitudinal roughness. Thus, it is important to analyze the factors that affect these three distresses, and to develop prediction models. In this paper, three distress prediction models were developed using DataPave program which stores data from a wide variety of pavement sections In the United States. Also, sensitivity studies were conducted to evaluate how the input variables impact on the distresses. The result of sensitivity study for the prediction model of rutting showed that asphalt content, air void, and optimum moisture content of subgrade were the major factors that affect rutting. The output of sensitivity study for the prediction model of fatigue cracking revealed that asphalt consistency, asphalt content, and air void were the most influential variables. The prediction model of longitudinal roughness indicated asphalt consistency, #200 passing percent of subgrade aggregate, and asphalt content were the factors that affect longitudinal roughness.