• Research in Plant Disease
• /
• v.9 no.4
• /
• pp.224-228
• /
• 2003

Five commercial chemicals, Dimethomorph, Foseyl-Al, Oxadixyl + Mancozeb, Propamocarb hydrochloride, and Metalaxyl, were tested for control of tobacco black shank (Phytophthora nicotianae) and/or delaying buildup of the resistant population to Metalaxyl which has been used for control of the disease in Korean tobacco farms. Propamocarb hydrochloride seemed to have a cross-resistance to the Metalaxyl resistant isolates showing similar response with Metalaxyl in vitro. Meanwhile, Dimethomorph+Mancozeb and Oxadixyl+Mancozeb were selected to be the promising chemicals which are able to be alternative to Metalaxyl for the black shank control in accordance with in vitro and in field trial.

• Journal of agriculture & life science
• /
• v.51 no.2
• /
• pp.165-173
• /
• 2017

To evaluate performance of the experimental pick-up type pulse crop harvester for harvesting sprout bean, its pick-up and discharging grain loss ratios, grain quality such as whole grain ratio, damaged grain ratio, unthreshed grain, and foreign material ratio in grain tank, germination rate of threshed grain, and theoretical field capacity of the harvester were analyzed according to engine speeds of 2000, 2400 and 2800 rpm and harvesting speeds of 0.6, 1.0 and 1.4 m/s. It is considered that the harvester showed optimum performance at the engine speed of 2800 rpm and the harvesting speed of 1.0 m/s, and then average pick-up grain loss ratio of 2.7%, discharging grain loss ratio of 0.5%, whole grain ratio of 99.3%, damaged grain ratio of 0.2%, unthreshed grain ratio of 0.0%, foreign material ratio of 0.2%, and germination rate at 8 days after seeding of 72.8% were shown. It is considered that the harvester has lower grain loss and higher grain quality than the imported bean combines. And also as it could harvest 3 rows of cut and dried sprout bean crop width of which was about 2 m, its effective field capacity was estimated for about 50 a/h.

• Journal of the Korean GEO-environmental Society
• /
• v.2 no.4
• /
• pp.73-81
• /
• 2001

Soil cement has been the typical material for the pavement and soft ground improvement. It has not been used up to date because that quality control is not easy and durability is not long enough for practical application. Since environmental influence is important, the application of high strength soil cement pavement has been increased for pedestrian roads of the garden, golf courses and sidewalks recently. In this study, the reference table was suggested for mixing design with appling statistical experimental technique to reference table. The reference table showed the relationship among improved strength, Soilcrete stabilizer, fine sand ratio and superplasticizer agent. The objective soil used in this study was the soft marine clay that is widely found in Korea, the compressive strength range of improved soil was between $50{\sim}150kg/cm^2$.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2011.05a
• /
• pp.457-457
• /
• 2011

저영향개발(LID, Low Impact Development)은 물순환체계 개선을 위해 녹색 공간의 확보, 자연형 공간 조성, 자연상태의 수문순환 기능의 유지 기법 등을 활용한 개발 대상지에서의 강우유출 및 비점오염원의 영향을 최소화할 수 있는 새로운 방법이다. LID는 강우 유출수의 지하침투, 강우 종료시 증발산량의 확보, 강우 유출수의 재이용 등을 통한 강우 유출량을 최소화하는 것에 그 목적이 있다. LID 방법은 우수저류 공원, 생태저류지, 지붕층 저류공원, 보도 저류공간, 인공습지, 완충녹지대, 수목 보존지대, 지붕층 배수관, 강우 저장조, 투수성 포장, 토양 개량, 불투수층 최소화, 비점오염원 저감 등으로 효율성, 경제성, 유연성, 합리성, 토지 가치증대 등의 장점이 있다. 영산강 수계의 BOD 배출부하량이 점오염원(21,019kg/일)과 비점오염원(50,047kg/일)의 비율이 3:7 로 비점오염원 배출부하량이 훨씬 큰 상태이다. 특히, 광주광역시, 농업용 토지, 축산계 등의 비점오염원이 영산강 수질에 크게 영향을 미치고 있다. 따라서 본 연구에서는 비점오염원의 영향이 큰 영산강 수계를 대상으로 앞으로 이루어지는 개발계획을 분석하여 LID 기법을 적용하였을 때 영산강 수질에 미치는 영향을 모델링을 통해 예측하고자 한다. 수질개선에 어느 정도의 효과가 있는지 검증하기 위해 국내 실정에 맞고 QUAL2E 모델을 근간으로 WASP5 모형의 장점들을 접목시켜 Bottle BOD의 반응기작 및 조류의 생산에 의한 유기물 증가, 탈질화 반응 등 정체수역에서 일어날 수 있는 반응기작을 모의할 수 있도록 보완한 QUALKO2 모형을 이용하여 그 효과를 모의하고자 한다. 본 연구를 통해 LID 기법이 도시화에 영향을 얼마나 덜 주는지, 수계의 비점오염원 효과를 통해 물순환 체계의 개선이 어느 정도로 어루어지는지에 대한 효과를 검증을 할 수 있는 계기가 될 수 있을 것으로 판단된다.

• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.28 no.4
• /
• pp.462-468
• /
• 1983

Collected 38 colored soybeans, which was cultivated under the conventional field conditions, were investigated about their organeloptic parameters and correlations among factors such as organeloptic score, texturometer parameters and chemical components of seeds. Most of the organeloptic parameters were affect much more by the characteristics of each cultivars than by grain weight, and then showed significant differences with the effect of interactinon between grain weight and cultivar, too. Also among contribution degrees of texturometer scores to overall acceptance, cohesiveness was higher in small, medium and super grains, however in large grains, hardness. And among sensory attributes, suitable toughness was contribute most positively to acceptance.

• Journal of Plant Biotechnology
• /
• v.37 no.3
• /
• pp.305-312
• /
• 2010

During a last decade, the introduced traits in commercialized GM crops have been diversified from a simple trait such as herbicide resistance gene or insectresistance gene which are related to the crop production into more complicated traits such as modification of fatty acid or essential amino acid composition, modified coloring pattern of flower. In addition, it was investigated that several other GM crops bearing more refined traits expected to lead next generation are also awaiting for risk assessment (RA) or under field test for the preparation of RA in the near future. These GM crops include abiotic stress resistance including drought or cold, increased biomass, production of bioethanol or diesel, production of pharmaceuticals or functional materials for industrial. In particular, in 2008 and 2009, it was reported that the highest number of GM crops for molecular farming are under developed in laboratory or green house level in all the world. Likewise, in Korea, 171 events from 49 plant species are under developed to introduce several important traits. At present, about 10 events are under field test to select elite lines for RA application. For the first time, herbicide resistance turfgrass developed by Korean research team has been submitted for RA and currently under requested for additional data. Moreover, GM rice resistant to leaf roll (folder) disease is expected as a next event to be submitted for RA application.

• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.66 no.4
• /
• pp.289-296
• /
• 2021

This study aimed to analyze the optimal transplanting date of the floury endosperm rice varieties Hangaru, Seolgeang, Singil, and Baromi2 allowing to reduce the viviparity rate. The viviparity rate rapidly increased with the mean temperature during the ripening stage. Therefore, to reduce the viviparity rate, we calculated the optimum heading date based on the safe heading date limit in each area so that the ripening stage occurred at lower temperatures. hen, the effects of changes in heading date were monitored by recording the transplanting date and the temperature during the growth period. The transplanting date was highly correlated with the number of heading days in the field. Therefore, the optimum transplanting date was calculated according to the transplanting date in each area. When the accumulated temperature was 700℃, if floury rice was transplanted at the optimum transplanting date, the mean temperature was approximately 20℃. When the accumulated temperature was 900℃, the mean temperature was approximately 18℃. Under these conditions, the viviparity rates of Hangaru, Seolgeang, and Singil rice were lower than 10%. However, Baromi2 showed a high viviparity rate. These results suggest that the viviparity rate of Hangaru, Seolgeang, and Singil rice can be reduced by transplanting at the optimum transplanting date. However, further research is required for pinpointing the optimum transplanting date of Baromi2 rice.

• Journal of Bio-Environment Control
• /
• v.20 no.3
• /
• pp.221-226
• /
• 2011

The study was carried out to investigate the effect of MA packaging materials on quality and storability of tomato in long distance export condition. We found that the fresh weight loss in perforated film was higher than other breathable films. The fresh weight of tomato (cv 'Madison') packaged with breathable films, such as 5,000 cc, 10,000 cc, $20,000cc/m^2{\cdot}day{\cdot}atm$ oxygen permeable films, reduced less than 0.6%, but perforated film that already being used for packaging horticultural crops showed 1.4% fresh weight loss during $5^{\circ}C$ storage for 20 days and then $20^{\circ}C$ storage for last 5 days with 85% relative humidity. The carbon dioxide and oxygen concentration in tomato packages showed proper level for MA storage in $20,000cc/m^2{\cdot}day{\cdot}atm$ $O_2$ breathable film treatment at $5^{\circ}C$ storage. Although at $20^{\circ}C$ storage, the carbon dioxide concentration increased sharply, the oxygen concentration decreased remarkably, the change of these gases concentration was the lowest in 20,000 cc film treatment. The ethylene concentration was sharply increased at $20^{\circ}C$ from $21^{st}$ day to $25^{th}$ day after $5^{\circ}C$ storage for 20 day, and the concentration was lower in 20,000 cc film treatment among the breathable film treatments. Until 20 days, at $5^{\circ}C$ storage all treatments did not exceed the marketability. However, the last 5 days during at $20^{\circ}C$, the fruit appeared fungal rots and the quality rapidly decreased. The $20,000cc/m^2{\cdot}day{\cdot}atm$ $O_2$ permeability treated tomato performed higher firmness (9.56 N), vitamin C (16.31 mg/100 gFW), and soluble solids ($7^{\circ}Brix$) than other breathable films at final storage day. The results suggest that the $20,000cc/m^2{\cdot}day{\cdot}atm$ $O_2$ permeable film treatment of tomato (cv 'Madison') performed the highest quality and storability of tomato for long distance exporting.

• Horticultural Science & Technology
• /
• v.31 no.5
• /
• pp.640-647
• /
• 2013

This study was conducted to provide exportation strategy by surveying on preference of Japanese consumers on cut chrysanthemum exported. The survey was conducted two times by a local survey company in Japan, and the surveys were conducted largely on chrysanthemums for casual flowers and the altar. After departmentalizing Japanese consumers per groups the result were analyzed through conjoint and cluster methods, flower colors and shape were used relatively higher rate for selection criteria of flowers in every group in the case of casual flowers. Group 1 comprised of 60 year-old housewives who reside in a small city with high school diploma and annual income less than 300 million yen, and group 2 of 40 year-old housewives who are small city residents with high school diplomas and annual income of 300 million yen show higher rate of use in flower shape than colors. Another group 3 whose members are 50 year-old housewives, small city residents with high school diplomas and annual income of 600 million yen showed higher rate of use colors than the shape for selection criteria of flowers. The consumption characteristics according to the ages of the consumers showed a pronounced tendency. The 40-50 year-old housewives preferred single flowers packed with other flowers, and the 60 year-old housewives double flowers packed with only chrysanthemums. In flower color, the 50-60 year-old housewives preferred white and yellow flowers, and the 40 year-old housewives pink and yellow flowers. Therefore, there are needs for development strategy of new products considering the consumption characteristics of flower shape and color according to the ages of consumer. After analyzing the chrysanthemums for altar by departmentalization of Japanese consumers, every group showed relative higher rate of use for flower shape for selection criteria of flowers. According to the analysis on the consumption characteristics, group 1 which is comprised of 30-40 year-old housewives who reside in small city with high school diplomas and income less than 300 million yen, and the group 2 of 20 year-old housewives who reside in small city with college diplomas and annual income less than 300 million yen. They are very sensitive to the price of the products while the group 3 of 50 year-old housewives who reside in small city with high school diplomas and annual income less than 300 million yen are insensitive to the price. The 30-50 year-old housewives preferred white and pink flowers, and the 20 year-old housewives yellow and pink flowers. In flower shape, the 50 year-old housewives preferred anemone shape, the 30-40 year-old housewives double shape, and the 20 year-old housewives pompon shapes. Therefore, the white, double flowers for the 30-40 year-old housewives and the yellow, pompon flowers for the 20 year-old housewives are needed to be created at the lowest cost, while the white, anemone flowers are needed to created at higher cost with high quality. In light of these results, it is considered that we should understand the types of purchasing products through consumption characteristics of Japanese consumers. Also we should plan, create market-oriented and consumer-oriented products, and should export them in order to expand more exportation.

• Clean Technology
• /
• v.21 no.3
• /
• pp.141-152
• /
• 2015

As environmental issues are emerging, bio-plastic suppliers in leading countries have been foreseeing the strong needs for environment-friendly materials such as eco-packing materials due to increased attention and regulation on recycle. To catch up with the demand, various types of bio-plastics based on natural feedstocks were developed and released on a market. These bio-plastic products drew the great attention even in domestic industries. At present, international oil price fluctuation and heavy charge on waste raise the unit cost of production and disposal expense of conventional plastic materials. These conditions make bio-plastic an alternative, because it is not restrained by oil prices and problem in the disposal. It is also expected that bio-plastic will be applied to various types of products including containers, industrial supplies, disposables, and medical supplies. However, the bio-plastic is still in its infancy, thus more research and understanding should be followed to put it to application. Bio-plastic is considered as environment-friendly material with high potential which has the advantages of production and disposal.