• Proceedings of the Korean Society for Emotion and Sensibility Conference
• /
• 2003.11a
• /
• pp.51-55
• /
• 2003

소형 표시창에서 펜과 커서키를 이용한 타겟 포인팅 성능을 비교하기 위하여 두 가지 실험이 수행되었다. 첫 번째 실험에서 우리는 서로 다른 타겟 크기에서 두 가지 입력방법에 의한 참여자의 타겟 포인팅 성능을 조사하였다. 타겟의 크기가 5미리 보다 작을 경우 펜입력이 키를 기본으로 하는 입력보다 더 에러가 많지만 타겟 크기가 5미리일 때 에러율이 키입력과 같은 수준으로 감소한다는 것을 발견했다. 두 번째 실험에서 우리는 타겟의 개수가 미치는 영향을 조사하였다. 그 결과 타겟의 크기가 5미리일 때 타겟의 거리가 3단계의 경로길이를 초과할 경우 펜입력이 키입력보다 더 빨리 타겟을 포인팅할 수 있다는 것을 알았다.

• Proceedings of the Korean Information Science Society Conference
• /
• 2000.04a
• /
• pp.15-17
• /
• 2000

실시간 시스템에서 예상치 못한 오류 발생은 성능에 악영향을 미친다. 이를 예방하기 위하여 체크포인팅이라는 후방 에러복구기법을 이용하여 오류 발생시에도 예측 가능한 결과를 보장할 수 있다. 실시간 시스템에서의 체크포인팅은 비실시간 시스템과는 달리 시간제약성을 만족시켜야 하기 때문에 비실시간에는 최적인 체크포인팅 간겨곽는 다르게 고려 되어야 한다. 이런 체크포인트 간격에 따른 성능의 차이를 시뮬레이션을 통하여 확인하였고 결과를 분석하였다.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.26 no.7A
• /
• pp.1220-1226
• /
• 2001

실시간 시스템에서 예상치 못한 오류 방생은 성능에 악영향을 미친다. 이를 예방하기 위하여 체크포인팅(checkpointing)이라는 후방 에러복구기법을 이용하여 오류 발생시에도 예측 가능한 결과를 보장할 수 있다. 실시간 시스템에서의 체크포인팅은 비실시간 시스템과는 달리 시간제약성을 만족시켜야 하기 때문에 비실시간에서 최적인 체크포인팅 간격과는 다르게 고려되어야 한다. 본 논문에서는 체크포인트 간격에 따른 실시간 시스템과 비실시간 시스템간의 성능의 차이를 시뮬레이션을 통하여 확인하였고 결과를 분석하였다.

• Journal of Advanced Navigation Technology
• /
• v.20 no.6
• /
• pp.503-510
• /
• 2016

In recent years, owing to the growing user demand for the two-way internet service based on the move global broadband communications, a new type of satellite terminal has developed, known as earth station in motion (ESIM). This service was required by Resolution 158 (WRC-15) to study on the coexistence with the co-primary fixed service (FS) in 27.5-29.5 GHz as a FSS uplink. In this paper, four scenarios was introduced to account for the antenna pointing error and the azimuth for an analysis on the sharing between ESIM and FS. From analysis results, the required separation distance between two systems should be about 32~52 km according to the elevation angles of $20^{\circ}{\sim}40^{\circ}$ using thresholds of 5% and 10% outage probability. Therefore, it is necessary to control the azimuth angle due to a moving terminal as well as the pointing error of ESIM to minimize the required separation distance and to protect the co-primary FS.

• Journal of Satellite, Information and Communications
• /
• v.1 no.2
• /
• pp.32-37
• /
• 2006

ETRI has been developing the Ka-band Antenna subsystem for COMS(Communications, Ocean, and Meteorological Satellite) which will be launched at the end of 2008. The antenna subsystem employs the two parts: East Panel and West panel of spacecraft. ETRI in cooperation with domestic companies are under design phase for the antenna subsystem development. This paper focuses in the Ka-band reflector pointing error analysis to verify the antenna subsystem performance specification, especially EOC gain variation etc. The analysis performed is that induced by reflector surface deformation as a result of thermo elastic distortion. Beam pattern variations are verified by the use TICRA

• Archives of design research
• /
• v.17 no.4
• /
• pp.61-68
• /
• 2004

A great variety of handheld device are coming onto the market. Some have advanced features compacted into very small sized hardware. In order to maximize the capability of these devices, we need to understand the characteristics of different input methods and utilize them in a sufficient way. Our study aims to understand characteristics of each device, so that we can design user interfaces more effectively. Two experiments were conducted to compare target pointing performance with a pen and with a hardware key on small displays. In experiment 1, we examined participants' performance of target pointing with both input methods at different target sizes. It was found that pen operation is more erroneous than key based operation when target size is smaller than 5mm, but at a target size of 5mm, the error rate decreased to the same level as for key input. In experiment 2, we examined the effect of the number of targets. The results showed, with a target size of 5mm, the pen could point to targets quicker than with key input, when the distance to the target exeeds a path length of 3 steps.

• Annual Conference of KIPS
• /
• 2004.05a
• /
• pp.27-30
• /
• 2004

모바일 컴퓨팅 환경은 네트워크가 손상되기 쉬우며, MH(Mobile Host)를 지원하는 MSS(Mobile Support Station)가 안정적이지 못하기 때문에, 이런 상황을 고려하여 시스템 환경을 모델링 한다. 메시지 전송 시 에러가 발생했을 경우 복구 기법으로 체크포인팅 기법과 메시지 로깅 기법을 추가적으로 사용하게 된다. 본 논문에서는 움직임을 기반으로 한 모바일 시스템 환경에서 체크포인트와 함께 메시지 로그를 사용하는 기법의 성능을 비교하고자 한다.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.21 no.12
• /
• pp.1412-1422
• /
• 2010

A bistatic radar using the pulse chasing can detect a target to track successive transmitted pulses using a receive beam for effectively scanning the cosite search area. When tracking a transmitted pulse with the receive beam, some beam pointing errors within pulse-to-pulse can cause the timing error in received pulse and the variation of the signal strength. In this paper, we have proposed that some errors due to the receive beam pointing error could limit the MTI filter's performance and derived that the relationship between the MTI performance and the geometric factors which are the inherent properties in bistatic configuration. Through the simulation, we have considered the limitations of the improvement performance restricted by the receiving beam pointing error and confirmed the contribution to the performance improvement in maintaining the receiving beam pointing error of under 0.5 degrees.

• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.23 no.5
• /
• pp.131-138
• /
• 2023

In this paper, a free space optical communication device that can be used in a mobile base station of several km or less was fabricated and its characteristics were investigated. To overcome the loss due to atmospheric transmission, an optical fiber amplifier (EDFA) with an output of 23 dBm or more was used. In order to increase the focusing speed and miniaturization of the laser beam, an optical lens was manufactured, and a transmission lens was designed to have beam divergence within the range of 1.5 to 1.8 [mrad]. A PT module that controls PAN/TILT was fabricated in order to reduce pointing errors and effective automatic alignment between transceiver devices. In this study, Reed-Solomon (RS) code was used to maintain the transmission quality above a certain level. It was manufactured to be able to communicate at a wireless distance of 300m in a weather situation with visibility of 300m. For performance measurement, it was measured using BERT and eye pattern analyzer, and it was confirmed that BER can be maintained at 2.5Gbps.

• Journal of the Korean Institute of Illuminating and Electrical Installation Engineers
• /
• v.22 no.12
• /
• pp.164-175
• /
• 2008

Atmospheric effects on laser beam propagation can be broken down into two categories: attenuation of the laser power and fluctuation of laser power due to laser beam deformation. Attenuation consists of scattering of the laser light photons by the fog. Laser beam deformation occurs because of small-scale dynamic changes in the index of refraction of the atmosphere. This causes pointing error. In order to analyse these effect on optical wireless communication system, in this paper uses cassegrain optics as a transmitting and receiving telescope, AID as a detecting device and ill as a light source. The signal modulating and demodulating method is a IM/DD. I show the effects of fog and pointing error and calculate the possible communication distance for BER is $10^{-9}$.