Ka-band Antenna Subsystem Pointing Variation Analysis

Ka 대역 안테나 서브시스템 포인팅 에러 분석

  • Lee, Yong-Deok (Global Area Wireless Technology Research Group, ETRI) ;
  • Choe, Jang-Seop (Global Area Wireless Technology Research Group, ETRI) ;
  • Park, Jae-U (Global Area Wireless Technology Research Group, ETRI) ;
  • Lee, Seong-Pil (Global Area Wireless Technology Research Group, ETRI)
  • 이용덕 (한국전자통신연구원 통신위성시스템연구팀) ;
  • 최장섭 (한국전자통신연구원 통신위성시스템연구팀) ;
  • 박재우 (한국전자통신연구원 통신위성시스템연구팀) ;
  • 이성필 (Global Area Wireless Technology Research Group, ETRI)
  • Published : 2006.12.30

Abstract

ETRI has been developing the Ka-band Antenna subsystem for COMS(Communications, Ocean, and Meteorological Satellite) which will be launched at the end of 2008. The antenna subsystem employs the two parts: East Panel and West panel of spacecraft. ETRI in cooperation with domestic companies are under design phase for the antenna subsystem development. This paper focuses in the Ka-band reflector pointing error analysis to verify the antenna subsystem performance specification, especially EOC gain variation etc. The analysis performed is that induced by reflector surface deformation as a result of thermo elastic distortion. Beam pattern variations are verified by the use TICRA

한국전자통신연구원은 2008년 말에 발사될 예정인 통신해양위성에 탑재될 Ka대역 안테나서브시스템을 개발하고 있다. Ka대역 통신용 안테나 서브시스템은 위성체의 동,서 판넬에 각각 하나씩 구성되어 있다. 이를 추진하기 위하여 한국전자통신연구원은 현제 대한항공(주)과 공동으로 통신위성 안테나 서브시스템을 설계하고 있다. 본 논문은 이득 변화 등과 같은 안테나 서브시스템 성능 규격을 검증하기 위하여 Ka 대역 반사판 포인팅 에러분석에 대하여 기술한다. 수행된 분석은 열변형에 의한 반사판 표면 변형 데이터 이며 이를 Ticra로 빔패턴의 변화를 확인하였다.

Keywords