• 대한기계학회논문집
• /
• 제16권11호
• /
• pp.2082-2089
• /
• 1992

본 연구에서는 모델링재료를 이용한 AISI4130축대칭 도움형상의 열간 단조 공 정 설계 방안을 이룩하기 위한 실험을 수행하였다. 본 실험에 사용된 모델링 재료는 Van Akan International사 제품의 Plastalina를 이용하였다. 모델링재료와 실제 재 료 사이의 상사성을 검토하기 위해 압축실험을 수행하였는데 압축 실험시 모델링재료 와 평다이 사이의 마찰력을 줄이기 위해 베이비파우더, 휴지, 바셀린, 테프론테잎 등 을 이용하였으며 램 속도, 온도, 그리고 변형률도에 따른 응력 변화를 검토해 보았다. 열간 공정시에 수반되는 금형과 공작물 사이의 마찰력을 알아보기 위해 앞에 열거한 윤활제를 이용한 링실험을 수행하여 전단마찰계수(m) 값의 변화를 알아보고 폐쇄단조 시 주요한 설계방안을 검토하기 위해 플래쉬를 갖는 폐쇄단조 실험을 수행하였다. 이 실험에서는 폐쇄단조시 중요한 설계변수 중의 하나인 플래쉬 두께 대 폭비, 플래쉬 부를 통한 체적손실, 그리고 원기둥모양의 초기 단조 시편 형상비 등에 따른 설계방안 을 검토하여 기존 참고문헌에 나와 있는 결과들과 유사성을 검토하였다. 이와같은 실험 결과를 체계적으로 확립하고 고강도강 대형 단조품생산에 필요한 단조하중 예측, 예비성형체 설계, 성형성 연구등에 대한 응용성을 검토하고자 한다.

• 한국소성가공학회:학술대회논문집
• /
• 한국소성가공학회 1999년도 단조 심포지엄
• /
• pp.75-86
• /
• 1999

• 대한기계학회논문집A
• /
• 제30권10호
• /
• pp.1293-1297
• /
• 2006

In this paper, kinematic analysis of a double-action link-type die set for enclosed die forging is carried out. The structure of the die set and its operational principle during enclosed die forging are introduced in detail. A closed-form solution of the relative velocity of the middle plate with respect to the upper plate after the upper and lower dies are enclosed is given in terms of the link lengths and the distance from the lower pin to the upper pin of the link system. The effect of the link lengths on both strokes and velocities is investigated. It has been shown that the relative velocity of the middle plate with respect to the upper plate varies almost linearly with the stroke of the upper plate.

• 대한기계학회논문집A
• /
• 제20권8호
• /
• pp.2458-2467
• /
• 1996

The rigid-plastic finite element analysis was performed for analysis of ofhot forging and cold sizing of a bevel gear. Two dimensional analysis was carried out to investigate the defect occurrence on vertical symmetric planes during hot forging and three dimensional analysis was to understand the filling behavior on horizontal planes during cold sizing. The involute curve of a tooth was approximated by a circle for convenience in the present analysis. In order to estimate the elastic deformation of the gear and dies during cold sizing, linear elastic finite element analysis was performed. Results of the analysis can be used to predict grain flows and strength distributions in the forged gear, and to design dies and an appropriate preform for the cold sizing.

• 한국정밀공학회지
• /
• 제23권10호
• /
• pp.96-102
• /
• 2006

This paper presents the mechanics of the link of a double-action link-type hydraulic die set for the enclosed die forging. Operational principle of the die set in the enclosed die forging is introduced with emphasis on force transmission from the press and the hydraulic system to the material through links, die components and punches. The force exerted on the link is statically investigated and its structural analysis is carried out. The analyzed results are discussed to be used for design of the link system.

• 한국소성가공학회:학술대회논문집
• /
• 한국소성가공학회 2006년도 춘계학술대회 논문집
• /
• pp.391-394
• /
• 2006

In this paper, a criterion on enclosed die forging with a double action link type hydraulic die set is presented. Operational principle of the die set in enclosed die forging is introduced with emphasis on force transfer from the press and the hydraulic system to the material through links, die components and punches. Force transfer mechanism is examined and three different modes are introduced. Requirements on force equilibrium are applied to the three force transfer modes and a criterion on enclosed die forging with a double action link type hydraulic die set is drawn. The criterion is discussed to minimize forming load.

• 한국정밀공학회지
• /
• 제23권4호
• /
• pp.37-43
• /
• 2006

In this paper, an approach to adaptive finite element analysis of three-dimensional forging processes is presented with emphasis on remeshing. In the approach, an optimal tetrahedral element generation technique is employed and the mesh density is specified by the combination of the weighted normalized effective strain and the normalized effective strain rate as well as the weighted normalized curvature. The approach is applied to computer simulation of an enclosed die forging process of a bevel gear and its results are compared with its related experiments. It has been shown that the analyzed results are in good agreement with the experimental ones.

• 한국소성가공학회:학술대회논문집
• /
• 한국소성가공학회 2005년도 추계학술대회 논문집
• /
• pp.143-147
• /
• 2005

In this study, a die set for enclosed die forging is developed and it is applied to precision forging of bevel gears and spiders. The enclosed die forging die set is introduced in detail together with the enclosed die forging. A target mechanical press and a model product are selected and various engineering technologies are applied for detail design of the enclosed die forging die set. Several precision forgings are manufactured by the developed die set. The enclosed die forging die set as well as the precision forging processes are developed under intensive industry-university cooperation.

• 소성∙가공
• /
• 제1권2호
• /
• pp.20-31
• /
• 1992

대형 강괴의 업셋팅 공정은 주조 조직의 방향성을 없애고, 코깅작업의 효율을 향상시키기 위한 충분한 단조비를 확보하기 위하여 필요한 공정이다. 공정에 영향을 주는 인자로써 상부 금형의 형상을 변화시켜 가면서 해석을 수행하였다. 극단적인 긴 파이프성 기공의 변형거동과 중심부에서 높이에 따른 원형기공의 닫힘거동 및 압하율과 기공폐쇄 정도를 관찰하였다. 충분한 단조비를 얻고 기공의 닫힘 및 압착을 이루기 위한 적절한 압셋팅 다이의 선택 및 업셋팅 공정을 예측하여 공정개선에 기여하고자 한다.

• 한국소성가공학회:학술대회논문집
• /
• 한국소성가공학회 2007년도 추계학술대회 논문집
• /
• pp.183-188
• /
• 2007

We simulated a hot forging process for the spider with four legs and an enclosed die forging process for the spider with three legs using an intelligent forging simulator AFDEX 3D and compared the predictions with the experiments in terms of the deformed shape. The formation of characteristic lines was emphasized in the simulation to simulate the extruded legs with higher accuracy.