• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.32 no.7
• /
• pp.19-28
• /
• 2004

This study is concerned with the method of equilibrium-pressure prediction from transient data. Pressure measurement system consisted of pressure sensor and pressure tube. The surface orifice where pressure is measured is connected to a pressure sensor by a tube. In case of high orifice pressure, the pressure sensor responds rapidly to the orifice pressure. But when the orifice pressure is low the pressure sensor does not respond rapidly to the orifice pressure and time lag occurs seriously. Various test conditions are applied to investigate the time lag and to assess the methods of equilibrium-pressure prediction. The test time of the low-pressure measurement can be reduced by the method of equilibrium-pressure prediction of the present study.

• Journal of Korean Ophthalmic Optics Society
• /
• v.14 no.3
• /
• pp.17-27
• /
• 2009

Purpose: This review article was written to determine the effects of parameters characterizing a hard contact lens (RGP included), such as BCs, diameters, edge angles, on the time interval for tight fitted lens to return to the equilibrium when it was decentered from blinking. Methods: A mathematical formulation was established to relate or calculate the restoring forces and thickness of lacrimal layer beneath the cornea with the various lens parameters when the tight fitted lens was decentered from blinking. Based on this formulation the differential equations and their numerical solution program were set up to describe the time dependence of the lens on the position and to estimate the time for the lens's return to the equilibrium after blink. Results: It is found that the time interval for the tight fitted lens to return to the equilibrium decreases as either the BC decreases or the diameter increases because both the reduction in BC and increase in diameter result in the increase in the lacrimal layer thickness between the lens and cornea increase which yielded the lowering of the viscous friction in the lens motion. As the edge angle of tight fitted lens increases the time for recentering decreases due to the increase in restoring force without change in lacrimal thickness beneath the lens. In the case of flat fitted hard lens (RGP included), the lacrimal layer thickness under the lens increases as either BC or diameter increases which results in reduction in viscous friction so that the time for the lens's return to the equilibrium were to decrease. The edge angle of flat fitted lens does not affect the lens motion. Conclusions: The effect of BCs on the lens motion (time to approach the equilibrium) was concluded to be significant with both tight and flat fitted lens where its results are contrary with each other. The edge angle of lens only affects the motion in tight fitted lenses.

• Journal of the Korean Institute of Intelligent Systems
• /
• v.8 no.4
• /
• pp.53-61
• /
• 1998

This paper describes the stability analysis of TSK (Takagi-Sugeno-Kang) fuzzy systems which can represent a large class of nonlinear systems with good accuracy. A TSK fuzzy model consists of TSK fuzzy rules and the consequent of each fuzzy rule is a linear input-output equation with a constant term. There may exist equilibrium points more than one in the TSK fuzzy model and each equilibrium point rnay also have different nature of stability. The local stability of an equilibrium point is determined by eigenvalues of the Jacobian matrix of the linearized TSK fuzzy model around the equilibrium point. Stability of both the continuous-time and the discrete-time systems is analyzed in this paper.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.14 no.10
• /
• pp.4733-4738
• /
• 2013

This paper proposes a method to obtain the dynamic equilibrium configuration of a constrained mechanical system by using multibody dynamic analysis. Dynamic equilibrium equations with independent coordinates are derived from the time-dependent constraint equations and dynamic equations of a multibody system. The Newton-Raphson method is used to find numerical solutions for nonlinear algebraic equations that are composed of the dynamic equilibrium and constraint equations. The proposed method is applied to obtain the dynamic equilibrium configuration of a speed governor, and the results are verified on the basis of the results from conventional dynamic analysis. Furthermore, vertical displacements at equilibrium configuration, which varied with the rotational velocity of the speed governor, are calculated, and design parameter analysis of the equilibrium configuration is presented.

• 한국신재생에너지학회:학술대회논문집
• /
• 2007.11a
• /
• pp.590-593
• /
• 2007

물을 함유한 공극 크기 6, 30, 100 nm의 실리카겔에 이산화탄소 및 메탄을 반응시켜 온도$0{\sim}4$ $^{\circ}C$, 압력 $15{\sim}40$ bar 의 범위에서 가스 하이드레이트 생성속도를 측정하였다. 공극 크기가 작아짐에 따라 특정 온도에서의 평형압력이 높아지는 열역학적 특성을 감안하여 통일한 압력차 (평형압력과 실험압력의 차)를 얻을 수 있도록 조건을 설정하였다. 이산화탄소의 경우 통일 온도에서 하이드레이트 생성속도는 일반적으로 압력이 높아짐에 따라 가속되는 것을 알 수 있었다. 단위 물 당 포집되는 이산화탄소의 양은 최대 1.0을 넘지 못하였다. 또한 하이드레이트 생성을 위해 필요한 유도시간 (induction time)이 2내지 8시간 수준으로 매우 길었다. 공업적인 하이드레이트 이용을 위해서는 빠른 생성속도가 필요한 만큼 유도시간을 단축, 없애기 위해 계면활성제로 황산 도데실 나트륨 (sodium dodecyl sulphate)이 첨가된 수용액을 이용하였다. 계면활성제가 포함된 수용액에서의 하이드레이트 생성은 유도시간이 사라져 매우 빠르게 바뀌었고, 포집되는 이산화탄소도 15% 정도 증가되었다. 메탄의 경우에는 공극 크기가 작아질수록 하이드레이트 생성속도 및 가스 포집도가 저하되는 결과를 보였다. 이산화탄소의 경우와는 다르게 유도시간이 나타나지 않았으며 비교적 높은 가스 포집도를 얻기 위해서는 평형압력과 실험압력의 차이가 최소 2.0MPa 이상이어야 했다.

• Proceedings of the Korean Nuclear Society Conference
• /
• 1996.11a
• /
• pp.157-161
• /
• 1996

중수형 발전소에서 삼중수소 제거나 중수생산과 관련된 수소동위원소 교환반응용으로 이용되는 소수성 고분자촉매의 담체인 스티렌-디비닐벤젠 공중합체의 촉매금속인 백금의 흡착 특성을 관찰하였다. 백금담지실험을 위해 고분자담체를 제조하였으며, 항상 일정한 표면적과 기공분포를 얻을 수 있었다. 백금담지실험결과 10시간 정도가 지나면 흡착평형에 도달함을 알 수 있었으며, 흡착평형실험 결과는 Langmuir model을 잘 따르고 있음을 알 수 있었다.

• Journal of Radiation Protection and Research
• /
• v.34 no.4
• /
• pp.184-189
• /
• 2009

In pressurized heavy water reactors, workers who enter radiation controlled areas must submit their urine samples to health physicists after radiation work; these samples are then used to monitor internal radiation exposure from tritium intake. This procedure assumes that the samples submitted represent tritium concentration inside the body at equilibrium. According to both technical reports from the International Commission on Radiological Protection and experimental results from Canadian nuclear utilities, tritium inside the body generally reaches equilibrium concentration after approximately 2-3 hours of intake. In practice, urine samples can be submitted either before the 2 hours mark or after several hours of radiation work because of the numerous tasks that workers must perform and their frequent entries during nuclear power plant maintenance. In this paper, tritium concentration in workers' urine samples was measured as a function of time submitted after radiation work. Based on the measurement results, changes in the tritium concentration inside the body and its effect on internal dose assessment were then analyzed. As a result, it was found that tritium concentration reaches equilibrium concentration before the 2 hours mark for most workers' urine samples.

• Proceedings of the Korean Institute of Surface Engineering Conference
• /
• 2017.05a
• /
• pp.141-141
• /
• 2017

국제해사기구(International Maritime Organization)는 선박 평형수로 인하여 발생하는 환경문제를 방지하기 위하여 지난 2004년 선박 평형수 관리 협약을 제정하였고, 2016년 핀란드의 비준함에 따라 2017년 9월 8일부터 발효될 예정이다. 이 협약에 대응하기 위하여 선박 평형수 처리기술이 개발되어 승인이 되었다. 이중 수중방전을 이용한 기술은 화학약품의 첨가 등이 없어 경제적이고 내부에서 발생하는 OH라디컬, 자외선, 충격파, 전기장, 오존 등에 다양한 요소들에 의하여 수처리가 가능하고, 중화를 위한 첨가제 등이 필요없어 친환경적이다. 본 연구에서는 부산 항만 근처연안에서 채취한 바닷물을 대상으로 수중방전을 이용한 방법을 연구하였다. 실험방법은 그림1과 같이 Point to Point 방식의 전극을 꾸몄고, 용액은 1L이며, 전압은 8kV, 30kHZ로 가해주었다. 광학분석장비(OES)를 이용하여 수중방전시 발생되는 빛 분석을 하였다. 실험결과 OES분석 결과 살균작용하는 OH 라디컬이 발생하는 것을 확인할 수 있었다. 또한 실험 도중 시료를 채취하여 $35^{\circ}C$ 48시간동안 배양하였다. 배양 결과 시간이 경과함에 따라 미생물의 개체가 그림 2와 같이줄어두는 것을 확인할 수 있었다.

• Journal of Korean Ophthalmic Optics Society
• /
• v.9 no.1
• /
• pp.145-159
• /
• 2004

A mathematical model and its computer solution program were proposed to analyze the motion of contact lenses which are being subject to lid-blinking. The equation was derived by incorporating an acceleration induced lid's force exerting on the contact lens, the viscous damping resistance in the tear layer beneath the lens and the sliding frictional force between the lid and the contact lens surface into the formulation of differential equation describing the vibration. The model predicts the time-dependent displacement from the equilibrium postion during/after the blinking. During the blinking, as the time for the completion of one cycle of blinking decreases the off-the-equilibrium displacement of contact lens increases while the decrease of diameter in the contact cause the opposite effect. It is found that lid pressure exerting on the lens cause an insignificant lens displacement from the equilibrium position. After blinking the frequency of damped oscillation of contact lens decreases as the diameter of lens increases, due to the incresed surface while the reduced blinking time does not cause a significant frequency change. This is because that driving force for the contact lens movement posterior to blinking is the capillary-induced force not the lid force.

• Proceedings of the Korean Institute of Resources Recycling Conference
• /
• 2005.10a
• /
• pp.168-172
• /
• 2005

동일한 추출제가 함유된 3종의 추출레진을 대상으로 중희토류인 Gd의 추출특성을 비교하였다. 실험조건은 $20^{\circ}C$에서 평형 pH, Gd 농도, 추출시간으로 하여 다음과 같은 결과를 얻었다. 추출레진에서 추출시간 5분이내에 $Gd^{3+}$ 이온이 90%이상 추출되며, 추출시간 30분 이후에 변화가 거의 없어 추출반응이 종결된 것으로 판단된다. 평형 pH. 2.2이하에서 분배비는 평형 pH에 대해 선형적으로 감소하였다. Freundlich's 흡착등온식을 도입하여 3종의 추출레진에 대해 적용해 본 결과 결정계수$(R^2)$ 0.95이상으로 나와, Freundlich's 흡착등온식에 부합됨을 알 수 있었다.