• Resources Recycling
• /
• v.17 no.3
• /
• pp.56-61
• /
• 2008

The kudzu has been investigated as an adsorbent for treatment of Cr(VI)-containing wastewater. The specific surface of kudzu was analyzed to be $189.91m^2/g$ and its major composition were found to be nitrogen and oxygen. It was observed that adsorption reaction for Cr(VI) on kudzu meets 1st order in kinetics and Langmuir Model in equilibrium. As the pH of wastewater was increased, the adsorbed amount of Cr(VI) onto kudzu was increased due to the pre-combination of $OH^-$ with adsorbent and the efficiency of adsorption was found to be 60% when real electroplating Cr(VI)-containing wastewater was applied.

• Composites Research
• /
• v.36 no.1
• /
• pp.37-41
• /
• 2023

The treated water inside the ballast electrolytic cell creates a highly alkaline atmosphere due to hydroxide generated at the DSA(Dimension Stable Anode) electrode during electrolysis. In this study, a composite material that can replace the weakness of the PE-coated steel pipe used in the existing ballast pipe was prepared. The test samples are BRE(Basalt fiber reinforced epoxy), BRP(Basalt fiber reinforced unsaturated polyester), GRE(Glass fiber reinforced epoxy), and GRP(Glass fiber reinforced unsaturated polyester). And then it was immersed in NaOH for 720 hours. The friction test of each specimen was conducted. The Friction coefficient analysis according to material friction depth and interfacial adhesion behavior between resin and fiber were analyzed. As a result, the mechanism of interfacial separation between resin and fiber could be analyzed. In the case of the unsaturated polyester resin with low interfacial bonding strength the longer the immersion time in the alkaline solution, the faster the internal deterioration caused by the deterioration that started from the surface, resulting in a decrease in the friction coefficient. It is hoped that this study will help to understand the degradation behavior of composite materials immersed in various chemical solutions such as NaOH, acid, and sodium hypochlorite in the future.

• Journal of Industrial Technology
• /
• v.27 no.A
• /
• pp.203-209
• /
• 2007

본 연구는 목재로서 활용가치가 적은 수피(bark)를 활용하여 수질오염물질을 제거할 수 있는 여과 시스템에 대한 기초연구로서 소나무의 일종인 loblolly pine(Pinus taeda L.) 수피의 인 ($PO_4-P$) 흡착특성을 연구하였다. 실험에 사용된 수피는 입상형태로서 polyallylamine hydrochloride로 전처리하여 회분식 등온 흡착실험을 수행하였다. 회분식 등온흡착실험은 수용액 pH 3~pH 8범위에서, 인의 농도별(10, 20, 30, 40 mg/L)로 수행하였다. pH 5에서 가장 높은 인 제거 효율을 나타냈으며, 수용액의 pH는 실험 후 pH 3으로 감소하였다. 이러한 감소는 수피에 의한 phosphate의 흡착이 Lewis acid-base 반응으로서 이 과정에서 $H^+$의 방출로 인하여 나타난 현상인 것으로 여겨지며, 주된 반응 메카니즘은 더 연구할 필요성이 있다. 인 흡착은 초기에 빠른 속도로 진행되었으며 대략 200분 이후에 평형에 도달하였고, 시간이 지날수록 흡착양이 증가하는 경향을 보였다. 인의 흡착특성 결과는 Langmuir 등온흡착식과 Freundlich 등온흡착식으로 설명될 수 있으며, 등온흡착식 적용결과, 흡착제에 대한 최대 흡착능은 7.14 mg/g 이며 다른 흡착제와 비교하여 더 높았다. 실험결과와 모델에 의한 흡착능을 비교하고자 pseudo second-order model을 적용하여 흡착 동역학 상수를 구하였다. 또한 EDXA분석으로 회분식 흡착실험 후 수피와 인이 결합되어있는 것을 확인할 수 있었다.

• Korean Journal of Food Science and Technology
• /
• v.28 no.6
• /
• pp.1126-1134
• /
• 1996

The physical characteristics changes of carrots during drying were studied to minimize the quality degradation by applying improved drying process and pretreatment method. Physico-chemical properties of the product were analyzed, and then, drying mechanisms were explained by diffusion coefficients and drying models. In hot air drying process, the drying and rehydration efficiencies were high at low relative humidity and high temperature. Browning degree and specific volume also showed similar trend to drying efficiency. Diffusion coefficient, which describes moisture transfer, was also high at low relative humidity and at high temperature. It was verified using. Arrhenius equation that drying process was influenced by temperature. It was also observed during experiment that temperature changes were more effective in drying than relative humidity changes. Quadratic model was the most fittable in explaining the process. As a result of analyzing the experimental data with respect to the drying time, the contents of carotene and moisture could be modeled as a polynomial. As the air velocity increased, drying performance and rehydration efficiency increased.

• Journal of the Korean Society of Food Science and Nutrition
• /
• v.42 no.4
• /
• pp.615-620
• /
• 2013

To extend the shelf-life of salted Chinese cabbages, electrolyzed water (EW) was used to wash raw Chinese cabbages before the salting process (to control microbial growth), and different storage temperatures evaluated (0, 4, and $10^{\circ}C$). A tap water washing group (TW) was used for comparison. The initial total bacterial population was 5.36 log CFU/g in the TW treatment and 3.50 log CFU/g in the EW treatment. The EW treatment decreased bacterial numbers by approximately 2 log CFU/g compared to the TW treatment and kept this initial population number for 32 days at $0^{\circ}C$. The salinity had no difference during storage. In general, several factors (pH, reducing sugars, hardness, and transmittance) decreased over time, and decreased slowly with EW treatment and $0^{\circ}C$ storage. Overall, the salted Chinese cabbages with EW treatment showed lower bacterial populations compared to TW treatment, and when stored at $0^{\circ}C$, delayed decreases in quality.

• Korean Chemical Engineering Research
• /
• v.43 no.4
• /
• pp.542-547
• /
• 2005

Biosorption is considered to be a promising alternative to replace or supplement the present methods for the treatment of dye-containing wastewater. In this study, the protonated biomass of Corynebacterium glutamicum was evaluated for its potential to remove two types of reactive dyes (Reactive Red 4, Reactive Blue 4) from aqueous solution. The uptakes of dyes were enhanced with decrease in the solution pH, which was likely because the biomass functional groups increased at acidic pH and the positively charged sites could bind the negatively charged sulfonate group ($dye-SO_3^-$) of dye molecules. An equilibrium state was practically achieved in 10 hr. The Langmuir sorption model was used for the mathematical description of the sorption equilibrium. The maximum sorption capacities of C. glutamicum biomass for Reactive Red 4 and Reactive Blue 4 were estimated to 112.36 mg/g and 263.16 mg/g at pH 1, and 71.94 mg/g and 155.88 mg/g at pH 3.

• Proceedings of the Korean Society of Soil and Groundwater Environment Conference
• /
• 1999.10a
• /
• pp.99-102
• /
• 1999

본 연구에서는 대표적인 물리 화학적 토양정화방법인 토양세척기법의 효율증진을 위하여, Fe를 다량 함유한 고농도 윤활유 오염토양을 대상으로 알카리 용액과 산성용액의 세척효율을 비교 검토하고, 과산화수소의 첨가에 따른 세척효율의 향상효과를 알아보았다. 세척용제인 NaOH와 HCl를 이용하여 세척효율 검토 결과 NaOH를 이용한 경우에 약 60% 의 세척효율을 나타냈다. 또한 NaOH 농도에 따른 정화 효율은 각각 0.5% > 1% $\geq$ 2% 순서로 증가하였다. 기존의 세척효율을 향상시키기 위하여 과산화수소를 첨가하고 오염토양의 정화효율을 비교 검토한 결과 NaOH용액에서는 과산화수소의 농도가 증가할수록 정화효율이 증가하였으나 NaOH의 농도증가에 대해서는 큰 영향을 보이지 않았으며, NaOH 3%의 농도에서 과산화수소 1%를 첨가했을 때 85%의 정화효율을 나타냈다. 또한 과산화수소 주입시기에 따른 영향을 검토한 결과 세척 후 과산화수소를 주입한 경우에 정화효율이 높았다. 반면에 HCl의 경우는 HCl의 농도가 증가할수록 정화효율이 증가하였고, 세척하지 않고 과산화수소를 주입한 경우에 정화효율이 증가하였다. 고농도의 윤활유 오염토양의 세척효율을 증진시키기 위한 처리로서 과산화수소의 주입은 NaOH 상태에서 그 효율이 약 15%정도 증진되었으며, 일정시간에 이르면 정화효율이 평형에 도달하는 것을 알 수 있었다. HCl 상태에서는 25%의 정화효율이 증진되는 것을 알 수 있었다.

• Applied Chemistry for Engineering
• /
• v.26 no.5
• /
• pp.581-586
• /
• 2015

Adsorption of Safranin using granular activated carbon from aqueous solution was investigated. Batch experiments were carried out as a function of adsorbent dose, initial concentration, contact time and temperature. The equilibrium adsorption data were fitted to Langmuir, Freundlich and Dubinin-Radushkevich isotherm models. Based on an estimated Langmuir separation factor, $R_L=0.183{\sim}0.254$ and a Freundlich separation factor, 1/n = 0.518~0.547, this process could be employed as an effective treatment method. Adsorption data were also modeled using the pseudo-first and second-order kinetic equations. It was shown that the pseudo-second-order kinetic equation could best describe the adsorption kinetics. The negative Gibbs free energy (${\Delta}G=-3.688{\sim}-7.220kJ/mol$) and positive enthalpy (${\Delta}H=33.126kJ/mol$) indicated that the adsorption process was spontaneous and endothermic.

• Korean Chemical Engineering Research
• /
• v.55 no.4
• /
• pp.514-519
• /
• 2017

Adsorption characteristics of acid green 27 dye using activated carbon were investigated as function of adsorbent dose, pH, initial concentration, contact time and temperature. Freundlich isotherm explained adsorption of acid green 27 dye very well and Freundlich separation factors (1/n=0.293~0.387) were found that this process could be employed as effective treatment method. Kinetic studies showed that the kinetic data were well described by the pseudo second-order kinetic model. Pseudo second rate constant ($k_2$) decreased with the increase in initial acid green 27 concentration. Activation energy (10.457 kJ/mol) and enthalpy (79.946 kJ/mol) indicated that adsorption process was physisorption and endothermic. Since Gibbs free energy decreased with increasing temperature, spontaneity of adsorption reaction increased with increasing temperature in the temperature range of 298 K~318 K.

• Korean Chemical Engineering Research
• /
• v.54 no.2
• /
• pp.255-261
• /
• 2016

Adsorption experiments of Acid Yellow 14 dye using activated carbon were carried out as function of adsorbent dose, pH, initial concentration, contact time and temperature. The equilibrium adsorption data were analyzed by Langmuir, Freundlich and Temkin isotherm model. The experimental data were best represented by Freundlich isotherm model. Base on the estimated Freundlich constant (1/n=0.129~0.212) and Langmuir separation factor ($R_L=0.202{\sim}0.243$), this process could be employed as effective treatment method. The heat of adsorption of Temkin isotherm model was 5.101~9.164 J/mol indicated that the adsorption process followed a physical adsorption. Adsorption kinetics experimental data were modeled using the pseudo-first-order and pseudo-second-order kinetic equation. It was shown that pseudo-second-order kinetic equation could best describe the adsorption kinetics. Base on the negative Gibbs free energy (-4.81~-10.33 kJ/mol) and positive enthalpy (+78.59 kJ/mol) indicate that the adsorption is spontaneous and endothermic process.