• 한국신재생에너지학회:학술대회논문집
• /
• 2010.11a
• /
• pp.149.2-149.2
• /
• 2010

본 연구에서는 하이드레이트 형성시 촉진효과를 갖는 것으로 보고되고 있는 TBAB, TBAF를 첨가한 천연가스 하이드레이트의 열역학적 특성 분석과 $^{13}C$ NMR을 통한 구조 및 동공점유에 관한 분석을 하였다. 천연가스 혼합기체 ($CH_4$ (90%) + $C_2H_6$ (7%) + $C_3H_8$ (3%))에 10, 40, 60 wt%의 TBAB 또는 10, 34, 45 wt%의 TBAF 용액을 첨가하여 하이드레이트(H) - 물(Lw) - 기상(V)의 3상 평형을 측정하였다. 3상 평형 측정결과 순수한 천연가스 하이드레이트보다 평형조건이 더 낮은 압력과 더 높은 온도영역에서 나타났다. 특히 양론비에 해당하는 TBAB 40 wt%, TBAF 34 wt%의 농도에서 가장 뛰어난 촉진효과가 나타났으며 그 이상의 농도에서는 촉진효과가 이전보다 저하되는 것을 알 수 있었다. $^{13}C$ NMR 분석 결과 천연가스 + TBAB (또는 TBAF) 하이드레이트의 격자에는 TBAB (또는 TBAF)와 $CH_4$만이 포집되어 있으며 $CH_4$이 포집되어 있는 동공이 순수한 $CH_4$ 하이드레이트의 작은 동공과 유사하다는 것을 알 수 있었다. 이상의 결과를 통하여 TBAB 또는 TBAF가 천연가스 하이드레이트의 열역학적 촉진제로 뛰어난 효과를 나타내었으며, 또한, 혼합 기체의 분리 연구에도 적용될 수 있음을 확인하였다.

• Computational Structural Engineering
• /
• v.11 no.4
• /
• pp.321-330
• /
• 1998

막구조의 초기형상을 결정하기 위하여 막요소의 기하학적 비선형을 고려한 평형방정식을 유도하고, 등장력곡면(equally stressed surface)을 결정하기 위한 알고리즘을 정식화한다. 막구조는 대변형에 의한 기하학적 비선형성을 포함하고, 막구조의 특성상 초기장력에 의한 초기변형을 고려해야 하므로, 본 논문에서는 막구조와 같은 인장구조물의 비선형 수치해석을 수행하기 위한 해석기법으로써, 동적이완법(Dynamic Relaxation Method)에 대한 해석알고리즘을 적용하고, 이 방법에 의해 수행한 해석결과를 검토함으로써 막구조 해석에 적용 가능한 수치해석기법을 제시하고, 수치해석에 대한 예를 통해 본 해석법의 타당성을 검증한다.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.33 no.11
• /
• pp.106-114
• /
• 2005

This study addresses space simulation test results and thermal modelling verification of HAUSAT-2 nanosatellite STM (Structural-Thermal Model). The thermal modelling of the HAUSAT-2 has been modified in accordance with test results. Thermal analysis results were repeatedly compared with test results for modified thermal modelling. It is verified that the analysis results for modified thermal modelling agree well with test results. Some surface heaters were implemented to simulate solar illumination for HAUSAT-2 Thermal Vacuum/Balance Test. A low-cost and effective thermal test methodology, which is applicable to ultra-small satellite system, was proposed and verified by test results in this study.

• Resources Recycling
• /
• v.12 no.6
• /
• pp.26-31
• /
• 2003

The power loss characteristics of Mn-Zn ferrite were observed with the sintering temperature. In case of $1150 ^{\circ}C$ sintering, the core loss increased with measuring temperature, and does not have minimum value at the point where the magnetocrystalline anisotropy be 'zero'. This reason mainly due to the change of core loss mechanism with grain size which affects residual loss. The grain size and sintered density slightly increased with equilibrium oxygen partial pressure at$ 1150 ^{\circ}C$ sintering. The resistivity and initial permeability showed no significance with atmosphere, these results due to complex effect of $Fe^{2+}$ concentration and microstructure change. The core loss at $100^{\circ}C$ decreased as the equilibrium oxygen partial pressure increased.e increased.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.19 no.9
• /
• pp.985-991
• /
• 2008

This paper presents a novel balanced mixer receiver front-end design based on a metamaterial structure applicable to differential-/common-mode excitation. This metamaterial structure functions as a leaky-wave antenna and provides in-trinsic common-mode suppression. Low LO leakage and high RF to LO isolation are achieved without additional filters for LO and RF paths. The metamaterial is based on a unit-cell which under a differential-mode excitation behaves like a composite right/left-handed(CRLH) metamaterial. In contrast, the metamaterial unit-cell is below cut-off under a common-mode excitation. Experimental results are used to verify the proposed metamaterial's differential-/common-mode characteristics. The metamaterial is integrated with a balanced mixer design resulting in an operation frequency range of $1.96{\sim}2.40$ GHz with an optimum mixer conversion loss of 21.1 dB at 2,4 GHz.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.15 no.6
• /
• pp.608-618
• /
• 2004

In this paper, modifying the diode star double balanced mixer of Maas, a novel resistive 60 GHz pHEMT MMIC star mixer is suggested. Due to star configuration, troublesome IF balun for ring configuration FET mixer is not necessary. In addition, the sysematic design method of dual balun through EM simulation is suggested rather than the design by inspection as Maas. The mixer circuit is fabricated as MMIC on CPW base using 0.1 um GaAs pHEMT Library of MINT in Dongguk University. The size is 1.5 ${\times}$ 1.5 $\textrm{mm}^2$ and its performance is adjustable by DC supply. It can be operated as both up and down converters and it shows the conversion loss of about 13∼18 ㏈ over the full V-band frequencies.

• Journal of the Computational Structural Engineering Institute of Korea
• /
• v.15 no.4
• /
• pp.675-691
• /
• 2002

The focus of this work is on the development of large-scale numerical optimization methods for optimal control of steady incompressible Navier-Stokes flows. The control is affected by the suction or injection of fluid on portions of the boundary, and the objective function of fluid on portions of the boundary, and the objective function represents the rate at which energy is dissipated in the fluid. We develop reduced Hessian sequential quadratic programming. Both quasi-Newton and Newton variants are developed and compared to the approach of eliminating the flow equations and variables, which is effectively the generalized reduced gradient method. Optimal control problems we solved for two-dimensional flow around a cylinder. The examples demonstrate at least an order-of-magnitude reduction in time taken, allowing the optimal solution of flow control problems in as little as half an hour on a desktop workstation.

• Journal of the Computational Structural Engineering Institute of Korea
• /
• v.25 no.1
• /
• pp.101-108
• /
• 2012

Initial shape analysis for cable-stayed bridges should be able to find optimizated initial cable forces and unstrained length that minimize deflection and bending moments of the deck and pylon. Comparison study of an improved initial force method and TCUD method for determination of initial cable forces in cable-stayed bridges is presented in this paper. For this purpose, an elastic catenary cable element and a nonlinear frame element are firstly described. And concepts and algorithm of two analysis methods are then presented. Finally to demonstrate the validity and the accuracy of two methods, numerical examples for initial state problems of cable-stayed bridges are given and compared based on these methods.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.12 no.3
• /
• pp.339-345
• /
• 2001

In this paper, FG-CPW (Finite-Ground Coplanar Wave-Guide) balanced diode mixer is presented. Frequency bandwidth is selected for a C-band, which is 5.72~5.82 GHz for RF, 5.58~5.68 GHz for LO, and 140 MHz for IF signals. A rat-race hybrid is designed for the accomplishment of single balanced type. A low pass filter (LPF) with CPW structure is used far good conversion loss and unwanted harmonics suppression. When LO signal with the power of 4 dBm at 5.635 GHz is injected, a conversion loss of 6.2 dB is obtained for the mixer. Also, the LO to RF and LO to IF isolation of 30 dB and 40 dB are obtained, respectively. This mixer can be used in the area on wireless LAN application.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.28 no.11
• /
• pp.928-931
• /
• 2017

This paper presents a 2 GHz pulse generator in balanced configuration for ground penetrating radar(GPR). In order to improve the input and output matching, the pulse generator is designed in balanced configuration with $90^{\circ}$ hybrid couplers. The designed pulse generator was fabricated using PCB process. The fabricated pulse generator draws 1 mA current from a 5 V power supply with 27.6 % efficiency. The measured output voltage swing is $3.7V_{pp}$ at 100 MHz pulse repetition frequency(PRF). The pulse width is 2 ns and the input and output return loss is more than 10 dB at the operating frequency of 1.7~2.6 GHz.