• 제목/요약/키워드: 평면 및 배치

검색결과 114건 처리시간 0.023초

가구 배치를 위한 인터렉티브 3D Visual 디스플레이 개발 (A Development of interactive 3D Visual Display for Furniture Arrangement)

  • 김지연;손상수;김병수
    • 한국멀티미디어학회:학술대회논문집
    • /
    • 한국멀티미디어학회 2003년도 추계학술발표대회(하)
    • /
    • pp.651-655
    • /
    • 2003
  • 본 논문에서는 맞춤 가구 제작 및 제작된 가구의 배치를 위한 효율적이면서도 사용하기 용이한 3D Visual 디스플레이 시스템을 개발하고자 한다. AutoCAD로 만들어진 평면파일(*.dxf) 그리고 3D 제작툴로 만들어진 오브젝트 파일(*.3ds)을 이용하여 현실감 있도록 시뮬레이션 하는 것을 목표로 한다. 2D로 제작된 AutoCAD 평면 설계 파일을 이용하여 평면 파일을 3D 투시도로 변환하고 3DS파일로 구축한 객체들을 배치한 뒤 텍스처매핑, 렌더링 등을 구현하여 최대한 현실감을 낼 수 있도록 개발한다.

  • PDF

대기행렬 이론 기반 SDN 제어 평면 및 응용 평면의 트래픽 성능 분석 모델 (An Analytical Traffic Model of Control Plane and Application Plane in Software-Defined Networking based on Queuing Theory)

  • 이승운;노병희
    • 한국차세대컴퓨팅학회논문지
    • /
    • 제15권4호
    • /
    • pp.80-88
    • /
    • 2019
  • 소프트웨어 정의 네트워킹(SDN)은 네트워크 장치의 데이터 기능과 제어기능을 분리한 미래 네트워킹 기술이다. 네트워크 장치들이 하나의 컨트롤러에 의해 중앙 제어되는 SDN의 구조는 대규모의 네트워크로의 확장성을 보장하기가 쉽지 않다. 선행연구들은 다수의 컨트롤러를 배치하는 수평적 확장성에 초점을 두어왔다. 이 연구들은 제어 평면과 응용 평면을 하나의 컨트롤러로 추상화하고 있다. 보편적인 SDN 아키텍처의 계층은 데이터 평면, 제어 평면, 응용 평면으로 나뉘는데 응용평면과 제어평면은 논리적으로 분리되어 있음에도 두 평면을 하나의 컨트롤러로 간주하였다. 따라서 본 논문에서는 대기행령 이론을 바탕으로 제어 평면과 응용 평면을 분리하여 반영한 트래픽 성능 분석 모델을 제안한다. 이 모델을 사용하면 복잡한 시뮬레이션 대신 간단하게 컨트롤러 배치 문제 등과 같은 확장성 문제에 활용할 수 있다.

와이어메쉬 굴곡배치 타당성분석 (Analysis of Bending Wire Mesh)

  • 김춘호;정대석
    • 한국건축시공학회지
    • /
    • 제9권6호
    • /
    • pp.169-174
    • /
    • 2009
  • 기존의 평면으로 배치된 와이어 메쉬의 단점을 조사하고 이를 개선하기 위한 3차원으로 굴곡한 를 개발하기 위한 타당성을 분석하고자 다양하게 굴곡시킨 경우에 대한 구조해석을 수행하였다. 상부슬래브 전체 및 편측 등분포하중을 재하 한 모든 경우에서 wire mesh 굴곡각도 $45^{\circ}$인 경우가 정모멘트구간 및 부모멘트구간 모두 휨인장응력은 가장 적게 발생되고 횡방향으로 $45^{\circ}$ 굴곡시킨 경우가 전단응력이 가장 적게 발생된다. 변위도 종방향 굴곡각도 $45^{\circ}$인 경우가 변위가 가장 적게 발생된다. 따라서 기존의 평면으로 배치한 와이어 메쉬보다 굴곡시켜 배치하면 휨인장응력, 전단응력, 변위가 줄어들게 되므로 구조적으로 성능이 개선되며 와이어 메쉬를 $45^{\circ}$로 굴곡하는 것이 가장 구조적으로 유리하다.

방류 흐름제어를 위한 투과성 잠제의 적용성 분석 (Applicability of Permeable Submerged Breakwater for Discharged Flow Control)

  • 허동수;이우동
    • 한국수자원학회논문집
    • /
    • 제49권1호
    • /
    • pp.51-60
    • /
    • 2016
  • 본 연구에서는 투과성 잠제의 형상 및 평면배치에 따른 방류 흐름제어 기능을 분석하기 위하여 유체 투과성 구조물 해저지반의 비선형 상호간섭을 직접해석 할 수 있는 PBM (Porous Body Model) 기반의 3차원 수치파동수조(NWT; numerical water tank) LES-WASS-3D를 이용하였다. 먼저 이용하는 LES-WASS-3D의 타당성 및 유효성을 확보하기 위하여 투과성 구조물를 통과하는 댐 붕괴파의 전파특성에 관한 수리모형실험과 계산결과를 비교 분석하였다. 투과성 잠제를 고려한 방류시뮬레이션으로부터 투과성 잠제의 적절한 형상 및 평면배치는 방류유속을 저감하고 흐름을 유도하는 데 상당히 효과적인 것을 알 수 있었다. 또한 투과성 잠제의 형상 및 평면배치에 따른 흐름제어에 대한 적용성은 평균류분포, 연직유속분포를 통하여 확인할 수 있었다.

잠제 설치 연안의 처오름 높이 특성 : PART I - 잠제의 평면배치에 의한 영향 (Characteristics of Run-up Height over Sandy Beach with Submerged Breakwaters : PART I - Effect of Plane Arrangement of Submerged Breakwaters)

  • 허동수;이우동
    • 대한토목학회논문집
    • /
    • 제28권3B호
    • /
    • pp.345-354
    • /
    • 2008
  • 본 연구에서는 잠제의 평면배치형상(이안거리, 개구율)에 따라 해빈상을 전파하는 풍파의 처오름 높이 변화특성을 논의하기 위하여, 파 투과성구조물 해빈의 상호간섭을 직접해석할 수 있는 3D-수치모델(LES-WASS-3D; 허와 이, 2007)을 이용하였다. 먼저, 기존의 수리모형 실험치와 본 연구의 계산치를 비교 검토하여 이용한 수치모델의 타당성 및 유효성을 검증한 후, 잠제 2기의 평면배치의 변화에 따른 수치시뮬레이션을 실시하였다. 결과로서 얻어진 잠제 주변의 파고분포 및 상층흐름 특성 등과 관련하여 연안에서의 처오름 높이를 검토한 결과, 처오름 높이 감소에 효율적인 잠제의 이안거리는 $Y/L_i=1.50{\sim}1.75$, 개구율은 $W/L_r=0.50$인 것을 확인하였다.

BIM 라이브러리 자동 배치 모형 개발 및 사례 검증 (Development and Application of a BIM Library Placement Automation Model)

  • 김현승;문현석;강인석
    • 토지주택연구
    • /
    • 제15권1호
    • /
    • pp.157-165
    • /
    • 2024
  • 국내 주요 공공발주기관의 BIM 도입 환경 수준이 높아짐에 따라 많은 설계 및 시공사에서는 BIM 수행 과정에서의 실질적인 업무 생산성 향상 방안에 대한 관심이 높아지고 있다. 이에 본 연구에서는 대표적인 BIM 설계 자동화 방안으로 BIM기반 설계 과정에서 반복적으로 수행되는 BIM 라이브러리 배치작업을 자동화하는 방안을 제시하였다. 특히 직선, 곡선, 수직 평면과 곡면 등 BIM 라이브러리의 배치 대상면을 구분하고, 각각에 대해 두 객체의 중심 거리와 선형 길이에 따른 배치간격, 배치방향 등을 고려하여 BIM 라이브러리 자동 배치 모형을 Dynamo로 구현하였다. 사례적용을 통해 다양한 배치 환경 및 조건에 따라 배치가 가능하고, 작업시간도 단축할 수 있는 것으로 확인되어 지형 특성에 맞게 배치해야 하는 각종 조형물이나 구조물들의 정확한 배치가 가능할 뿐만 아니라 배치 자동화를 통해 업무 생산성도 획기적으로 향상될 수 있을 것으로 기대된다.

고정블록을 포함한 CBL 기반 평면계획 (Floorplanning with Obstacles(Preplaced Block) based on CBL)

  • 강상구;임종석
    • 한국정보과학회논문지:시스템및이론
    • /
    • 제36권3호
    • /
    • pp.217-230
    • /
    • 2009
  • 본 논문에서는 고정 블록이 포함된 회로를 대상으로 하는 새로운 CBL 기반 평면계획 방법을 제안한다. 기존의 CBL 기반의 고정블록 평면계획의 문제점을 파악하고 이를 개선하였다. 제안한 방법은 자유 블록 만으로 구성된 CBL에 고정블록을 삽입하여 윈래 CBL과 그 위상이 유사하고 패킹이 가능한 새로운 CBL을 만드는 방법으로 이를 시뮬레이티드 어닐링에 적용하여 평면계획을 수행한다. 실험결과는 우리가 제안한 평면계획 방법이 고정블록을 효과적이고 효율적으로 배치할 수 있음을 보여준다.

제주도 읍·면지역 고등학교의 평면구성에 따른 영역별 특성 및 배치유형에 관한 연구 (A Study on the Area Characteristics and Layout Types of the Floor Plan of High School Facilities in Eup and Myeon Districts of Jeju Island)

  • 변정현;박철민
    • 한국농촌건축학회논문집
    • /
    • 제21권4호
    • /
    • pp.37-44
    • /
    • 2019
  • A reduction in the number of high school students in Eup and Myeon districts is very severe. This issue leads to the problem with educational programs of school and an academic achievement gap. Therefore, the purpose of this study is to analyze the characteristics of areas and layout types of the floor plan of high school facilities in Eup and Myeon districts of Jeju Island where the number of students reduces and to provide a fundamental material for establishing school environments. The floor plan of school facilities was categorized into learning, support, common, and other areas and the characteristics of each area were analyzed. As a result, it was necessary to make spatial and facility improvements in common area and support area. The layout type of each area was classified into centralized type, distributed type, and mixed type, and then each type was analyzed. As a result, the main building had low points of the floor plan for learning area and common area. In order to respond to the number of students, it is required to establish reasonable spatial plan criteria and guidelines under the supervision of Office of Education and furthermore to make an effort to create futuristic educational facilities.

강원 영서지방 향교건축의 배치 및 평면특성에 관한 연구 (A Study on the Layout and Floor Plan of Hyangkyo Architecture at Youngseo districts in Gangwon-do)

  • 임상규;채희재
    • 한국농촌건축학회논문집
    • /
    • 제13권4호
    • /
    • pp.9-16
    • /
    • 2011
  • This study aims to research the local characteristics of layout and floor plan at Hyangkyo Archiecture in Youngseo districts of Gangwon-do. Hyangkyo which were the institutional places of Chosun Dynasty used for stability and order of the dynasty as well as for the education of people. This thesis studies and analyzes the regularity which appears in the formation of architecture mainly in the aspects of layout, plane formality. Jeon-hak-hoo-myo is the arraying formality in which Myungryundang and Daesungjun are placed on a line of one axis with Myungryundang placed lower in the front and Daesungjun place higher in the back and this formality is applied for a land that slopes. The layout formation of Gangkak space is divided into Jeonjaehudang-type and Jeondanghujae-type. This study analyze arrangement type and plane characteristics about local old time school belonging to the Confucian shrine construction at Youngseo districts in Gangwon-do, there is purpose of research to wish to clear the regional special quality of local old time school belonging to the Confucian shrine construction at Youngseo districts in Gangwon-do.

잠제 제원 및 평면배치에 따른 쇄파특성 (Wave Breaking Characteristics due to Shape and Plane Arrangement of the Submerged Breakwaters)

  • 이우동;허동수;허정원
    • 한국해양공학회지
    • /
    • 제24권1호
    • /
    • pp.116-122
    • /
    • 2010
  • The aim of this study is to examine the effects of shape and plane arrangement of submerged breakwaters on 3-D wave breaking characteristics over them. First, the numerical model, which is able to consider the flow through a porous medium with inertial, laminar, and turbulent resistance terms, i.e. simulate directly WAve Structure Seabed/Sandy beach interaction, and can determine the eddy viscosity with a LES turbulent model in a 3-Dimensional wave field (LES-WASS-3D), has been validated by a comparison with Goda's equation for breaking wave heights. And then, using the numerical results, the wave breaking points over the crest of submerged breakwaters have been examined in relation to the shape and plane arrangement of submerged breakwaters. Moreover, the wave height distribution and upper flow around submerged breakwaters have been also discussed, as well as the distribution of the wave breaking points over the beach.