• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.8 no.5
• /
• pp.51-56
• /
• 2008

In this paper, we propose a printed planar antenna suitable for mobile wireless communications. Since the printed antenna is easy to fabricate due to simplicity, low cost, and light weight, it is widely used in communications systems. The conventional patch antenna takes too much surface area to be applied to a mobile receiver. Although the size is reduced using the printed antenna, still reasonably wide bandwidth should be considered. To overcome the disadvantage of narrow bandwidth, the substrate should be physically thick and the dielectric constant should be small. In this work, we suggest a simple form of printed planar antenna and show the optimal input impedance depending on the antenna size and operating frequency. The performance evaluation is achieved analytically for a prototype antenna model.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2008.05a
• /
• pp.685-688
• /
• 2008

Planar antennas are very efficient for the use of the out-door data transmission applications due to their low-profile characteristics. But the size of the antenna in UHF band blocks the practical usage. In this paper, a miniaturized planar antenna is investigated for the application of AMR system in UHF band. The designed antenna is fabricated in the form of the microstrip patch on the FR-4 substrate. The miniaturization is achieved by slot-loading on the patch. First, effects of simple slots on the size reduction are analyzed, followed by the design using more complex slots resulting in the reduction ratio of 37.9% in 425.6 MHz and bandwidth of 3.8 MHz. The effect of epoxy coating for the protection is also investigated.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.12 no.6
• /
• pp.979-983
• /
• 2008

Planar antennas are very efficient for the use of the out-door data transmission applications due to their low-profile characteristics. But the size of the antenna in UHF band blocks the practical usage. In this paper, a miniaturized planar antenna is investigated for the application of AMR system in UHF band. The designed antenna is fabricated in the form of the microstrip patch on the FR-4 substrate. The miniaturization is achieved by slot-loading on the patch. First, effects of simple slots on the size reduction are analyzed, followed by the design using more complex slots resulting in the reduction ratio of 37.9% in 425.6 MHz and bandwidth of 3.8 MHz. The effort of epoxy coating for the protection is also investigated.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.30 no.8A
• /
• pp.688-696
• /
• 2005

An antenna was designed and manufactured for the DBS receiver system. This antenna is a planar or flat antenna which shows many advantages over the conventional parabolic antenna such as higher aperture efficiency, easier installation and improved aesthetics to name a few. The antenna is a novel design employing microstrip annular ring resonating antenna elements and a radial waveguide feeder network. The LNB(Low Noise Blockdown Converter) is can integrate with the antenna iしt the back of the radial waveguide. The 35cm diameter antenna works at 31.8dBi minimum gain which implies an aperture efficiency of around $80\%$.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.13 no.5
• /
• pp.468-474
• /
• 2002

In this paper a novel two-arm microstrip spiral antenna with a circular slot on the ground plane is presented. The proposed antenna structure is constructed in a planar form without a balun circuit and the radiation characteristics of conventional and eccentric spiral antennas are obtained simultaneously. The main beam direction is normal to the plane of the spiral for characteristic frequency band and the direction of the main beam moves linearly into $\theta$ and $\phi$ direction as the frequency increases.

• Journal of the Institute of Electronics and Information Engineers
• /
• v.49 no.12
• /
• pp.95-110
• /
• 2012

The effect of a finite substrate size on the radiation characteristics of a two-element linear E-plane array antenna using microstrip patch antennas is investigated. The average active element pattern characteristics of two-element E-plane array antennas printed on different dielectric constant substrates with various substrate sizes and element spacings are analyzed. Using the average active element pattern, the radiation pattern characteristics of the array antenna versus scan angle is analyzed. The simulation results show that the diffracted fields of surface waves from substrate edges have a significant effect on the radiation characteristics of a 2-element E-plane array antenna. The distance between the center of patch antenna and the substrate edges on the E-plane for the enhancement of radiation characteristics of the array antenna is about $0.35{\lambda}_0$.

• The Journal of the Korea institute of electronic communication sciences
• /
• v.18 no.1
• /
• pp.11-22
• /
• 2023

A radiating elements fault diagnosis method with simplified radiation pattern measurement procedure was presented for planar active phased array antenna system. For presenting the mentioned method, the technique for linear approximation based on the radiation characteristics of a planar array configuration and a technique for solving a unique solution problem that occur in process of diagnosing a fault in a radiating elements were presented. Based on the presented method and a genetic algorithm, experimental simulations were performed for radiating element defect diagnosis according to various planar active phased array antenna configurations. As a result, it was confirmed that the presented radiating element fault diagnosis method can be smoothly applied to planar active phased antennas having various configurations.

• Journal of the Institute of Electronics and Information Engineers
• /
• v.50 no.5
• /
• pp.39-49
• /
• 2013

The effect of the finite substrate size on the radiation characteristics of H-plane linear microstrip array antennas is investigated. The radiation characteristics versus scan angle are systematically analyzed for 5-element H-plane linear array antennas with various substrate sizes and element spacings for the substrates with different dielectric constants. The distance between the antenna center and the substrate edge on the E-plane for the enhancement of the radiation characteristics of the array antenna is presented.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.11 no.7
• /
• pp.1242-1246
• /
• 2007

In this study, FSS(Frequency Selective Surface) with Koch Fractal Curve slot is positioned on the conventional single layer microstrip patch antenna. Numerical results of the proposed antenna bandwidth and the antenna gain are increased compared with those of the conventional single layer microstrip patch antenna. In the future, the fractal geometry of the slot in FSS(Frequency Selective Surface) as a supplementary microstrip patch is researched for the enhancement of the microstrip patch antenna characteristics.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2009.05a
• /
• pp.1807-1811
• /
• 2009

홍수기 유량측정에 있어서 가장 큰 어려움이었던 유속측정의 정확성을 확보하고 실무자의 안전성을 보장하기 위한 기본 취지에서 1993년 시작된 "대하천 유량 자동측정 설비개발"이라는 연구 주제하에 비접촉식 유속측정 기법에 대한 연구를 수년간 연구개발을 거듭한 결과물인 전자파표면유속계를 1999년도에 상품화하여 현재 국내에서 홍수유속측정 설비로 이용되어지고 있다. 현장에서 유량측정업무에 종사하는 실무자들은 홍수유량측정에 비하여 훨씬 간편함을 몸소 느끼게 되었고, 상품화보급이 시작된지 수년이 지난 상태에서는 더욱 성능이 개선된 전자파표면유속계가 개발되기를 기대하였다. 무엇보다도 홍수기에 유량측정시 기존의 유속측정 방법과 같은 방식으로 각 측선마다 전자파표면유속계를 설치해야하는 번거로움을 피력하였다. 기존의 전자파표면유속계는 하천을 가로지르는 교량위에서 흐름방향에 나란히 측정하는 조건을 고려하였기 때문에 이와 같은 편각인 상태의 유속측정은 검토하지 않았다. 이와 같은 사용자의 요구에 대하여 한국수자원공사에서는 홍수기 유량측정시의 사용자 편의성을 증대하기 위하여 성능개선 작업에 착수하여 편각측정용 전자파표면유속계를 개발하였다. 편각측정의 주된 목적은 전자파표면유속계를 모든 측선에 설치하지 않고 한 지점에서 편각(oblique angle)으로 여러 측선의 유속을 측정함으로써 유속측정의 효율성을 증대시키는 것이다. 전자파표면 유속계에서의 편각 측정은 하천의 유속 방향을 기준으로 정면에서 측정하면 수평 편각이 0도가 되며 좌우로 안테나를 회전하여 움직인 각도가 측정 편각으로 결정된다. 전자파의 물리적 특성 때문에 편각이 증가하면 반사된 신호의 수신 크기가 감소하여 측정이 불가능하게 된다. 이러한 문제를 최대한 극복하는 것이 본 연구의 중점 개선사항이다. 이를 통하여 전자파표면유속계를 교량의 임의 지점에 설치하여 좌우로 편각 $20^{\circ}$에 이르는 범위의 유속을 측정하고자 목표로 하였다. 홍수시의 현장 측정 환경은 열악하기 때문에 정확한 측정을 조건으로 측정자에게 최대한의 편리함과 신속한 측정 환경을 제공해야 효과적인 업무수행이 가능하다. 이러한 편각 측정을 가능토록 하기 위해서는 유속측정시 송신되는 전자파의 출력을 기존의 시스템보다 보다 높게 발사하여야 하며 안테나의 수신감도 및 지향성이 개선되어야 한다. 이를 위해서 안테나 형태에 있어 기존 전자파표면유속계와의 차이점은 기존안테나는 파라볼릭 형상이었으나 신규 제작된 안테나는 평면안테나로 이러한 형태의 개선를 통해 안테나 특성 및 구조적인 차이를 유도하였다. 두 가지 안테나 사양 각각 장단점이 있으나 가장 큰 차이점은 빔폭 특성에서 평면 안테나가 우수하며 수신 감도를 향상시킬 수 있다는 강점이 있다. 특히 Tx/Rx 분리의 평면안테나 구조는 파라볼릭 안테나에서 불가능한 기능으로서 편각측정으로 인한 수신감도의 저하의 문제를 해결하기 위한 개선조치이었다. 성능개선 제작된 편각측정용 전자파표면유속계를 이용하여 일반하천의 홍수유속에 대한 편각측정 실험을 안성천에서 실시한 결과 유속 약 1.7 m/s 인 상황에서 편각 $20\;^{\circ}$ 까지 편각 $0\;^{\circ}$일때와 유사한 측정 성능을 보였다.