• Proceedings of the Korea Information Processing Society Conference
• /
• 2012.11a
• /
• pp.482-485
• /
• 2012

본 논문은 평면 디스플레이 패널 외관 검사의 무인 자동화를 위한 전처리 단계의 알고리즘으로 패널 외관 검사 영역의 정합성 향상 및 자동 설정하는 알고리즘 기술에 관한 것이다. 평면디스플레이 패널의 제조 공정 중, 점등 검사 공정 단계에서는 Line 불량, Point 불량, 얼룩 불량, 외관 불량, Pol 불량 등 다양한 불량들을 검출한다. 이중 외관 불량 검사를 자동화하기 위한 전처리 단계로써 획득한 영상 내에서의 검사 영역을 설정함에 있어서 영상에서의 패널 위치의 변화, 패널의 Rotation/tilt, 패널 에지에 불량이 결부될 경우에도 실제 절단면을 정확하게 추출하여 불량 측정 오차를 최소화하는 알고리즘 을 제안한다.

• Tuberculosis and Respiratory Diseases
• /
• v.48 no.6
• /
• pp.870-878
• /
• 2000

Background : We have studied the $^{67}Ga$ SPECT to determine the activity of pulmonary tuberculosis, especially in patients with minimal extent of the disease on chest radiographs. Because active minimal pulmonary tuberculosis is sometimes difficult to diagnose by means of initial chest X-ray, sputum examination and $^{67}Ga$ planar imaging, we compared $^{67}Ga$ planar imaging with SPECT to evaluate minimal pulmonary tuberculosis activity. Methods : $^{67}Ga$ planar imagings and SPECTs of 69 patients suspected of minimal pulmonary tuberculosis by the initial chest X-ray were performed and compared to each other. Active pulmonary tuberculosis was defined by a positive AFB smear and/or culture in the sputum and changes shown on the serial chest X-ray findings. Results : 1) $^{67}Ga$ planar imaging imagings showed positive uptakes in 24 patients and no uptakes in 13 patients, patients, which confirms active pulmonary tuberculosis. But SPECT imagings showed positive uptakes in 25 patients and no uptakes in 12 patients. 2) Patients confirmed with inactive pulmonary tuberculosis showed no uptake on $^{67}Ga$ planar imaging. Only one of the 32 patients confirmed as having inactive pulmonary tuberculosis showed positive uptake on $^{67}Ga$ SPECT imaging. Conclusions : According to the results of our study, $^{67}Ga$ planar imaging and SPECT are both sensitive in detecting the activity of minimal pulmonary tuberculosis. The difference between the two methods is not statistically significant, and the negative predictive value of the $^{67}Ga$ SPECT is not higher than that of $^{67}Ga$ planar imaging.

• The Korean Journal of Nuclear Medicine
• /
• v.30 no.1
• /
• pp.139-144
• /
• 1996

갈륨스캔은 여러 종류의 염증성 질환 및 종양을 발견하기 위해 사용되고 있다. 특히 림프종은 갈륨스캔에서 양성율이 비교적 높은 종양으로 알려져 있다. 하지만 기존의 평면 영상만으로는 작은 크기의 종괴나 다른 장기에 의해 가려져 있는 경우에 위음성 결과를 보일 수 있었다. 최근 단일광자 방출 전산화 단층촬영(SPCET)을 도입하여 평면영상에 비해 더 나은 공간해상력으로 많은 정보를 얻고 있다. 저자들은 비호지킨 림프종 환자 30명을 대상으로 갈륨스캔 평면영상과 SPECT 영상을 얻어 비교하였다. 병변의 부위별로 두경부, 흉부, 복부에서 평면영상의 예민도는 각각 71%, 73%, 81%였으며, SPECT 영상의 예민도는 91%, 93%, 96%였다. CT 등 방사선학적 검사소견과 임상소견을 기준으로 하였을 때 위음성율은 평면영상의 경우 24%, SPECT 6.5%였다. 장의 방사능으로 인한 섭취와 폐문부 및 침샘의 비대칭적 섭취로 인한 위양성례가 4예 있었다. 결론적으로 비호지킨 림프종의 진단 및 병기를 결정하는데 있어서 갈륨스캔이 유용하며, SPCET 영상을 얻음으로써 더 나은 해부학적 위치 및 정확한 범위를 보여 줄 수 있을 것으로 생각된다.

• Journal of the Korean Society of Manufacturing Process Engineers
• /
• v.18 no.3
• /
• pp.49-58
• /
• 2019

Automatic transmissions are standard equipment in most automotive vehicles because they provide smooth speed shifting and a compact design with multiple speed ratios. Their structure consists mainly of planetary gear sets as power-transmitting devices and brakes and clutches as shifting devices. Several forward and one reverse speed ratios are achieved by actuating shifting devices to connect gears, input and output shafts, and the transmission case. In the development of a new transmission, kinematic configurations reflecting the transmission concept design are required, and the ability of the new concept design to be assembled without any interference among the connections must be demonstrated. In this study, an assemblability analysis of the kinematic configurations of a Ravigneaux-type automatic transmission was conducted with an assemblable example of an 8-speed Ravigneaux-type automatic transmission.

• The korean journal of orthodontics
• /
• v.34 no.3 s.104
• /
• pp.229-240
• /
• 2004

The purpose of this study was to evaluate the compensatory changes of occlusal plane angle in relation to skeletal factors. Lateral cephalograms of 61 adults with normal occlusion and 92 adults with skeletal malocclusions were traced and measured to analyze skeletal factors and occlusal plane angles. In terms of horizontal relationships, the normal occlusion group and malocclusion group were classified Into subgroups of skeletal Classes I, II, and III, while in terms of vertical relationships, each group was also classified into horizontal , average, and vertical subgroups. Some measurements were evaluated statistically by ANOVA and Post Hoc, and the others were reviewed by Paired t-tests. In this study, only the occlusal plane angle to AB plane did not show a significant difference between the normal occlusion group and malocclusion group. After treatment, the occlusal plane angle to the AB plane of the malocclusion group was approximated to that of normal occlusion group. The LOP to AB plane angle of the normal occlusion group was 91.7 in skeletal Class I, 88.8 in skeletal Class II, and 93.5 in skeletal Class III. This study was done to assess the treatment changes of the occlusal plane in the malocclusion group, and to draw a comparison with the normal occlusion group in order to present a reference to establish a new occlusal plane inclination.

• The korean journal of orthodontics
• /
• v.28 no.5 s.70
• /
• pp.865-875
• /
• 1998

The purpose of this study was to investigate the angle formed by the Sella-Nasion(SN) plane and Frankfort-Horizontal(FH) plane and evaluate the correlation and difference of the FH plane to other horizontal reference planes. Through this study we hope to present a basis for selecting a horizontal reference plae which can be implemented in cephalometric studies and in surgical orthodontic treatment planning. 600 subjects were chosen following a clinical examination md lateral cephlometric X-rays were taken. According to cephalometric analysis the subjects were classified into 3 groups , Skeletal Class I malocclusion or normal occlusion group(male 50, female 50), Skeletal Class II malocclusion group(male 50, female 65) and Skeletal Class III malocclusion group(male 50, female 50). The results were as follows. 1. The angle formed by the SN plane and FH plane showed no difference among the malocclusion groups, but there was a significant sex difference. For males the angle measured was $7.47^{\circ}{\pm}2.40^{\circ}$ whereas for females it was $8.93^{\circ}{\pm}2.72^{\circ}$. 2. The angle formed by the SN plane or FH plane and Mandibular plane was higher in females for all malocclusion groups. This angle in the Skeletal Class I malocclusion group was lower than in the other two groups. 3. There was no difference among the sexes or malocclusion groups considering the angle formed by the FH plane and Palatal plane. 4. The genial angle in the Skeletal Class III malocclusion group was higher than in the Skeletal Class I and Class II malocclusion groups in both sexes.

• Journal of the Korean Society of Radiology
• /
• v.5 no.5
• /
• pp.255-260
• /
• 2011

We wanted to evaluate the usefulness of three-dimensional reconstructive images using computed tomography for rib fracture patients. The reconstruction used in clinical multi planar reformation(MPR), volume rendering technique(VRT), and image data using quantitative methods and qualitative methods were compared. Much more, the artifact shadow was minimized to reconstruct with 3D volumetric image by using an law data in the analysis of the reconstructive image and chest CT scan of the evaluation result fractures of the thoracic patient. And we could know that the fractures of the thoracic determination and three dimension volume image reconstruction time were reduced.

• Proceedings of the KIEE Conference
• /
• 2008.10b
• /
• pp.294-295
• /
• 2008

본 논문에서는 검사 및 측정용 비젼 시스템에서 카메라와 평면거울을 이용하여 영상을 촬영할 패 발생하는 왜곡의 보정 방법을 제안한다. 빛이 거울과 카메라 사이를 통과할 때 거울 위치의 틀어짐으로 인하여 직진성을 보장받기 어렵다. 이러한 문제점을 해결하기 위하여 왜곡 영상에 대한 모델을 구하고 이를 해결하는 방법을 제시한다. 거울의 위치의 틀어짐은 영상 촬영시 일그러진 사각형 형태로 왜곡이 나타난다. 이 특성을 이용하여 사각형 형태의 실험 대상체를 생성하여 이를 촬영하고 왜곡의 정도를 측정하여 평면거울의 보상값을 구한다. 이 방법으로 평면거울의 자세를 보정하여 왜곡되지 않은 영상을 얻을 수 있다.

• The Transactions of the Korea Information Processing Society
• /
• v.5 no.4
• /
• pp.1044-1047
• /
• 1998

Non-destructive x-ray inspection system needs image intensifier to obtain the x-ray image. Captured image from image intensifier is distorted because the input plate of image intensifier has a spherical surface. In the research, in order to compensate this image distortion, we created the model of image intensifier and show mathematically that the image distortion was compensated. To show the performance of the proposed method, experiment was performed in real x-ray inspection system.

• Journal of the Korean Society of Manufacturing Process Engineers
• /
• v.18 no.11
• /
• pp.24-34
• /
• 2019

An automotive automatic transmission is a popular power-transmitting device in passenger vehicles, as it provides various speed ratios for diverse driving conditions with easy manipulation and smooth gear shifting. The transmission is mainly composed of input and output shafts, planetary gear sets, brakes/clutches, and housing, and it yields multiple forward gears and one reverse gear by actuating the shifting devices of the brakes and clutches. In developing a new transmission, kinematic configurations of a transmission, which presents a brief structure and actuation schemes for speed ratios, need to be checked to determine if the structure can be assembled in a layout. It is impossible for a transmission concept having any interference in connecting main components to be developed further in the design process, since connection interference leads to failure of a layout design in the 2-D plane. In this research, an analysis of the assemblability of a front-wheel drive automatic transmission is carried out on an example concept design by applying the vertex addition algorithm based on graph theory.