• Korean Journal of Construction Engineering and Management
• /
• v.6 no.3 s.25
• /
• pp.72-80
• /
• 2005

The number of apartments has been increased, and it is time to activate the remodeling or reconstruction. Recently remodeling has been preferred to reconstruction, because reconstruction might cause many problems. At this point of time, remodeling could save resources, preserve environment, and expand the construction market places. However, most research for remodeling is aimed to improve the financial value, and structural effects being caused by floor plan modification has not been done yet quantitatively. Remodeling naturally brings to floor plan modification, and it can cause serious problems of structural side. So we made apartments an object of study, then analyzed stress variation of structural elements according to the removal of shear wall, supposing the floor plan modification. For this purpose, we selected a sample of universal apartment floor plan and extracted floor plan modification factors. Then we applied the factors to sample floor plan and organized the results of stress variation of structural elements. As results, walls are most harmful when the independent walls are removed, and in case of slabs, it is most critical when continuous walls are removed.

• Journal of the Korean Society of Safety
• /
• v.16 no.2
• /
• pp.121-129
• /
• 2001

This paper demonstrates the development of optical temperature sensor based on the etched planar waveguide Bragg grating. Topics include design and fabrication of the etched planar waveguide Bragg grating, investigation of the grating reflection characteristics, and temperature measurement capabilities. The typical bandwidth and reflectivity of the surface etched grating has been ~0.2nm and ~7%, respectively, at a wavelength of ～1552nm. The temperature-induced wavelength change of the optical sensor is found to be slightly non-linear over ～20$0^{\circ}C$ temperature range. Theoretical models for the grating response of the sensor based on waveguide and plate deformation theories agree with experiments to within acceptable tolerance.

• The korean journal of orthodontics
• /
• v.29 no.1 s.72
• /
• pp.113-127
• /
• 1999

The purpose of this study is to investigate the stability of counterclockwise rotation of mandible by sagittal split ramus osteotomy to correct the skeletal Class III malocclusion with anterior open bite. Twenty five skeletal Class III open bite patients(mean age 20.6 years) who were treated by the sagittal split ramus osteotonues with rigid fixation were examined in this study. Cephalometric radiographs were taken for each Patients Preoperative(T1), ewly Postoperative(T2), and late postoperative Period(T3). Mean postoperative period was 8.0 months. Cephalometric analysis was done and data from T1, T2, and T3 were analyzed statistically by Paired t-test and Pearson correlation analysis. The following results were obtained. 1. Mandibular plane angle decreased $2.9^{\circ}$ and mandibular occlusal plane angle related to SN Plane decreased $2.7^{\circ}$ after orthognathic surgery(T2). At 6 months after orthognathic surgery(T3), mandibular plane angle increased $1.0^{\circ}$, but mandibular occlusal plane angle did not changed. 2. The amount of horizontal relapse long time after orthognathic surgery(T3) was 1.6 mm at B point and it was $22\%$ of the total posterior movements. There was no vertical relapse in the anterior facial height. 3. The related factor with horizontal relapse at late postoperative period was mandibular plane angle(p<0.01). The related factors with decreasing posterior facial height were amount of mandibular setback(p<0.01), increasing of mandibular ramus height(p<0.01), and decrease of the mandibular plane angle during operation(p<0.01). 4. There was no relationship between the amount of changes in mandibular occlusal plan angle during operation and the amount of relapse after surgery.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2019.05a
• /
• pp.257-257
• /
• 2019

최근 기후변화에 따른 대응을 위해 기존 수자원 활용의 고도화 및 배수능력 증대를 위해 다양한 방안이 추진되고 있으며, 그에 따라 기존 개수로에 신규 수로를 연결하여 합류와 분류를 시키는 사례가 증가하고 있다. 특히 신규 개수로 연결을 위한 분류부 형상은 관련 설계기준, 분류유량의 규모, 해당 지점의 하상변동 경향, 지형여건, 흐름 분류시설 및 구조물의 형태(양수펌프장, 스크린이나 수문, 암거설치)와 같은 구조적 요인 등에 의해 달라지지만, 이와 관련된 연구가 매우 부족한 실정이다. 따라서 본 연구에서는 2차원 수치모형을 이용하여 분류부 평면형상 변화에 따른 분류유량비와 흐름분리구역 분포 등에 대한 흐름특성을 분석하고 이수와 치수계획 수립 등에 활용하고자 한다. 본 연구에서는 TELEMAC-2D 모형을 이용하여 주수로 상류 유입흐름의 프루우드 수가 0.74, 0.52인 두 흐름에 대해 형상변화 폭을 주수로 폭(B)의 1B, 주수로 형상변화를 급확대, 점진적 확대 구간길이를 1B~3B로 변화시키며 분류유량비(분류수로 유입유량/상류 유입유량)와 흐름분리구역의 위치와 크기 등에 대한 분석을 수행하였다. 분류부 상류 유입흐름의 프루우드 수가 0.74, 분류유량비는 0.33인 흐름은 주수로 형상변화 구간길이가 1B 일 때 0.44~0.46, 3B일 때 0.54~0.60으로 점차 분류유량비가 증가한다. 반면 상류 유입흐름의 프루우드수가 0.52, 분류유량비가 0.52인 흐름은 주수로 형상변화 구간길이가 1B일 때 0.77~0.82에서 3B일 때 0.70~0.80으로 점차 분류유량비 증가율이 감소하는 경향을 나타내게 된다. 주수로 형상변화 폭을 0.5B, 1B로 달리하여 수로 형상변화를 시킨 경우 분류유량비 증가율은 각각 135~162%, 134~176%로 나타났으며, 이는 수로 형상변화 폭보다 변화구간 길이가 더 큰 분류유량비 변화에 영향을 미치는 것을 확인할 수 있다. 흐름분리구역은 상류 유입흐름의 프루우드 수가 0.74인 경우 수로형상 변화구간과 분류수로 입구에 형성되지만, 상류유입흐름의 프루우드 수가 0.52인 경우 수로형상변화 구간과 주수로 하류에도 형성된다. 수치실험 결과 동일수로 폭 직사각형 $90^{\circ}$ 분류수로에서 분류부 평면형상의 변화에 따라 주수로 하류방향흐름의 관성력은 감소하는 반면 분류수로로 향하는 횡압력경사와 흐름분리구역 발생위치 변화로 인해 분류 수로내 통수능이 증가하여 분류유량비가 급격하게 증가하게 된다. 또한 분류부 상류 유입흐름의 관성력이 작은 경우 분류부 평면형상 변화시 주수로 하류방향에서도 흐름분리구역이 형성되고 주수로 종방향 수위가 상승함에 따라 분류흐름 계획수립 시 세심한 주의가 필요하다.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 1992.10a
• /
• pp.126-130
• /
• 1992

본 연구에서는 평면 연삭반에서 연삭조건을 다양하게 변화시키면서 레진본드계 다이아몬드 숫돌을 이용한 기계구조용 세라믹스의 연삭가공 특성을 제시하기 위한 실험을 하였다. 본 연구에서는 고경도 기계구조용 세라믹스로서 대표적인 질화규소, 탄화규소, 알루미나를 선택하여 평형 연삭숫돌을 이용한 플런지 평면연삭 및 트레버스 평면연삭의 실험을 수행하였다. 각 연삭조건에 따른 표면거칠기와 연삭저항, 연삭동력등을 측정하여 가공범위를 설정하고자 하였다. 한편, 이와 같은 실험을 통하여 고품위의 가공면을 구하였다.

• The korean journal of orthodontics
• /
• v.36 no.5
• /
• pp.369-379
• /
• 2006

Objective: The purpose of this study was to find changes in the occlusal plane related to different vertical facial patterns and suggest treatment goals and conduct possible treatment mechanisms. Methods: 60 adult patients (28 males, 32 females) who had been diagnosed as Class 1 skeletal malocclusion and treated without extraction were selected. Patients were divided into three groups; short face type (group 1), average face type (group 2) and long face type (group 3), using the data on normal occlusion of Korean adults. Results: The results were achieved by analyzing cephalometric tracings of each group at pre-treatment, end-treatment and post-treatment (about 1 year recall check). The inclination of the occlusion plane tends to gradually increase as the face becomes longer In group 1, COP-X, FOP-X, L6/L1, MP-L6 were significantly decreased, and L1-FOP was significantly increased during the retention period (T3-T2). Group 2 showed no significant change, In group 3, FOP-X was significantly increased during the retention period (T3-T2). During the retention period, FOP-X showed significant change among each group, especially between group 1 and group 3. Conclusion: These results suggest that changes of occlusal plane inclination according to facial vertical pattern need to be considered during the retention period for intrusion, extrusion, and incisor overbite.

• The korean journal of orthodontics
• /
• v.30 no.5 s.82
• /
• pp.643-655
• /
• 2000

In Patients with severe skeletal discrepancy, surgical orthodontic treatment must be accompanied, and recently two jaw surgery has become a common procedure, resulting in improved esthetics and function. Choosing the position of the occlusal plane in this two jaw surgery is an important factor in postoperative stability Therefore this must be taken into consideration during the diagnosis and treatment plan. In this study, among patients with skeletal Class III occlusion, 25 patients(8 male, 17 female, average age $23.2{\pm}3.17$) who have undergone two jaw surgery, setting the ideal occlusal plane according to Delaire's architectural and structural cranial analysis. In comparing preoperative($T_1$). postoperative($T_2$, average of 15.4 days), and long-term postoperative($T_3$, average of 32.6 months) lateral cephalometric radiography, the following conclusions have been made. 1. There were no significant changes of the occlusal plane angle after the two jaw surgery, and there were no significant differences between the surgical technique(SSRO and IVRO). 2. The postoperative changes of the occlusal Plane had no relationship with the amount of jaw movement, amount of posterior impaction, nor the time relapse after surgery. 3. After two jaw surgery, in the SSRO group there was significant forward movement of the mandible, and in the IVRO group the lower incisors extruded as the mandible moved backward and downward which makes the genial angle and the mandibular plane angle significantly increased

• Proceedings of the Korean Society of Tribologists and Lubrication Engineers Conference
• /
• 1990.06a
• /
• pp.45-52
• /
• 1990

고도의 신뢰도를 요구하는 정밀기계의 보편화는 트라이볼로지 요소중에서 밀봉기능에 관련된 시일의 해석 및 설계가 커다란 관심사로 부각되었다. 특히 고속회전을 요하는 경우에 대한 회전 시스템의 동적 안정성은 대단히 중요하다. 미끄럼 접촉운동을 하고 있는 기계평면시일의 시일링 간극은 대단히 작기 때문에 시일의 접촉면에서 형상이 변화하게 되면 시일 성능은 커다란 영향을 받게 된다. 시일의 접촉표면 가공시 발생되는 평면도(flatness), 조립시의 회전축과 시일축 사이의 중심 맞추기의 어려움, 회전축의 자중량 등 때문에 발생되는 회전링 사이의 상대적인 경사도(misalignment)는 시일의 동적 불안정성에 영향을 준다. 또한 상대 접촉 운동면에서 경계 또는 고체 마찰에 의한 마멸의 진행은 시일의 코닝(coning) 현상을 일으킨다. 본 연구에서는 비압축성 유체가 온도의 영향을 받아 점도가 선형적으로 변화하는 경우에 대한 시일링 간극 내에서의 압력분포를 유한차분법을 이용하여 해석하였다. 여기서 얻어진 결과를 이용하여 시일의 축력과 모우멘트를 해석함으로써 시일의 동적 불안정성에 대하여 논하였다. 이 때 기계평면 시일의 형상은 코닝이 있고, 시일의 중심축이 경사진 경우를 고려하였다.

• Proceeding of Spring/Autumn Annual Conference of KHA
• /
• 2005.11a
• /
• pp.121-124
• /
• 2005

During that time various methods were introduced in the unit planning for the various realization. But the consideration against a variety from the living and functional side still is insufficient. The methods of this study are as follows: 1) Executing domestic instances of being completed above 30 years apartment housing. 2) Case studying the 'Wallgae mansion' in hannam-dong, one of them. Based on the results, this study is analyzed plan variations and the changing points of exterior elevations. The results are as follows: The layout integrated and divided changes composition of units and it is various escaping in the outer wall as the external space being various. Also including the balcony, the spaces with intermediate characteristics much more effect variety of elevations.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.11 no.7
• /
• pp.1242-1246
• /
• 2007

In this study, FSS(Frequency Selective Surface) with Koch Fractal Curve slot is positioned on the conventional single layer microstrip patch antenna. Numerical results of the proposed antenna bandwidth and the antenna gain are increased compared with those of the conventional single layer microstrip patch antenna. In the future, the fractal geometry of the slot in FSS(Frequency Selective Surface) as a supplementary microstrip patch is researched for the enhancement of the microstrip patch antenna characteristics.