• Proceedings of the Korea Multimedia Society Conference
• /
• 2001.06a
• /
• pp.425-428
• /
• 2001

본 논문에서 구현한 메쉬 편집기는 편집할 메쉬의 몇몇 점을 편집할 경우, 편집 정보가 그 점에 이웃한 점들에게도 영향을 미치게 되어, 편집 결과가 근사된 부드러운 곡면으로 표현하도록 하는 데 있다. 그러기 위해서는 3차원의 메쉬를 2차원 평면으로 매핑할 때, 매핑되는 원래의 메쉬의 모양이 크게 변형되지 않도록 하여야 하는데, 여기에 모양 유지 매개 변수화 방법을 사용하고 있다. 편집에 사용된 점의 편집 정보는 2차원 평면 다각형 안에 있는 서로 대응되는 점으로 매핑 되고, B-스플라인 보간으로 편집 정보는 2차 평면 안에 있는 다른 점들에게도 영향을 주게 된다. 이런 결과는 3차원 메쉬로 환원되어 부드럽게 근사된 곡면으로 표현된다.

• Proceedings of the Korea Multimedia Society Conference
• /
• 2001.06a
• /
• pp.212-215
• /
• 2001

본 논문에서는 평면 형상에 대한 새로운 계층적 표현 방법을 소개하였다. 제안한 방법에서는 근사화 과정의 근사화 오차(approximation error)를 근사화 순서와 정도를 결정하는 중요한 척도로 활용하였으며, 제안한 오차 조절 알고리즘을 통해 보다 자연스러운 근사화 표현이 가능하도록 하였다. 그리고 최소 경계 사각형(MBR: Minimum Bounding Rectangle)을 단순 확장한 최소 경계 팔각형(MBO: Minimum Bounding Octangle)을 지역화에 응용하였으며, 이는 다른 지역화 방법들과 비교하였을 때 상대적으로 더 효율적인 방법임을 확인할 수 있었다.

• Journal of Korean Society of Coastal and Ocean Engineers
• /
• v.21 no.2
• /
• pp.117-126
• /
• 2009

In order to test the accuracy between the modified mild slope equation (MMSE) without evanescent modes and the plane-wave approximation (PA) of eigenfunction expansion method, various numerical results from both models are presented. In this study, analytical solutions of two models are employed, one based on the MMSE derived by Porter (2003) and the other on the scatterer method of PA by Seo (2008a). Judging from direct comparisons against existing results of rapidly varying topography, the PA model gives better predictions of the wave propagation than the MMSE model.

• Proceedings of the Acoustical Society of Korea Conference
• /
• spring
• /
• pp.175-178
• /
• 1999

원형단면을 갖는 수신용 하이드로폰과 같은 면적의 정사각형 단면을 가정하여, 상온의 증류수를 매질로 초음파 변환기에서 방사되는 음장의 공간적 분포를 모의실험하였다. 이러한 "정사각형 평면 근사 평균법(이후 평면 근사 평균법)"을 이용하여, x-축 주사, z-축 주사, xy-평면 주사 및 xz-평면 주사를 모의실험하여 실제 실험에서 나타날 수 있는 여러 가지 현상을 조사하였다. z-축 주사 모의 실험 결과는 Beissner의 이론과 비교하여 비교적 잘 일치하였다

• Transactions of the Korean Society of Mechanical Engineers
• /
• v.11 no.1
• /
• pp.160-169
• /
• 1987

Numerical simulation of the flow of upper convected Maxwell fluid through planar 4:1 contraction has been performed using type dependent difference apprximation of vorticity equation. For creeping flow assumption, the numerical convergence has been achieved up to much higher values of elasticity parameter than those obtained by conventional finite difference method. For non-vanishing Reynolds number flow, it is shown that the corner vortices disappear, which is in good qualitative agreement with extant experimental results. In doing so, spatial distributions of stream function, vorticity and stresses are considered in relation to change of type of vorticity.

• The Journal of the Korea institute of electronic communication sciences
• /
• v.18 no.1
• /
• pp.11-22
• /
• 2023

A radiating elements fault diagnosis method with simplified radiation pattern measurement procedure was presented for planar active phased array antenna system. For presenting the mentioned method, the technique for linear approximation based on the radiation characteristics of a planar array configuration and a technique for solving a unique solution problem that occur in process of diagnosing a fault in a radiating elements were presented. Based on the presented method and a genetic algorithm, experimental simulations were performed for radiating element defect diagnosis according to various planar active phased array antenna configurations. As a result, it was confirmed that the presented radiating element fault diagnosis method can be smoothly applied to planar active phased antennas having various configurations.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.15 no.9
• /
• pp.785-795
• /
• 1990

For the far field radiation pattern of a microstrip array antenna which is conformed to a cylindrical surface and forms an arc array, an approximate analysis method using FOURIER TRANSFORM is presented. In this method, the conformal array antenna is projected on the effective aperture plane and assumed to be an aperiodic array with nonlinear phase tilt. The effective aperture plane includes four end-points of each arc on the cylindrical surface. When the effective aperture ratio which is normalized to the planar type is from 1.0 to 0.9, it is confirmed that this approximate method is valid. To the array on the effective aperture plane, it is assumed that the phase tilt is due to the distance between aperture plne and curvature surface. Specially, when the radius of arc is more than 5 times to its length, the FOURIER TRANSFORM METHOD could be used with only varying scale factors. The results of calculating by approximate method are good agreement with the results of COORDINATE TRANSFORM METHOD and experimentally measured value in the range of -40dB. And, the difference of half power angle is less than 5 degrees when the effective aperture ratio moer than 0.9.

• The Journal of the Korea Contents Association
• /
• v.14 no.10
• /
• pp.1-9
• /
• 2014

Generally, integral image used for autostereoscopic 3d display is generated for flat lens array, but flat lens array cannot provide a wide range of view for generated integral image because of narrow range of view. To make up for this flat lens array's weak point, curved lens array has been proposed, and due to technical and cost problem, approximate surface lens array composed of several flat lens array is used instead of ideal curved lens array. In this paper, we constructed an approximate surface lens array arranged for $20{\times}8$ square flat lens in 100mm radius sphere, and we could get about twice angle of view compared to flat lens array. Specially, unlike existing researches which manually generate integral image, we propose an OpenCL GPU parallel process algorithm for generating real-time integral image. As a result, we could get 12-20 frame/sec speed about various 3D volume data from $15{\times}15$ approximate surface lens array.

• Journal of the Institute of Electronics Engineers of Korea TC
• /
• v.45 no.7
• /
• pp.9-16
• /
• 2008

For the efficient routing on a Sensor Network, one may consider a deployment problem to interconnect the sensor nodes optimally. There is an analogous theoretic problem: the Steiner Tree problem of finding the tree that interconnects given points on a plane optimally. One may use the approximation algorithm for the problem to find out the deployment that interconnects the sensor nodes almost optimally. However, the Steiner Tree problem is to interconnect mathematical set of points on a Euclidean plane, and so involves particular cases that do not occur on Sensor Networks. Thus the approach of using the algorithm does not make a proper way of analysis. Differently from the randomly given locations of mathematical points on a Euclidean plane, the locations of sensors on Sensor Networks are assumed to be physically dispersed over some moderate distance with each other. By designing an approximation algorithm for the Sensor Networks in terms of that physical property, one may produce the execution time and the approximation ratio to the optimality that are appropriate for the problem of interconnecting Sensor Networks.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.28 no.2
• /
• pp.147-154
• /
• 2017

The impedance approximation has been widely used to model an earth surface such as ocean surface. In calculation of the dyadic Green's function for the impedance half plane, Sommerfeld integral and its partial derivatives are required. It is known that two far-field approximation of the Sommerfeld integral can be represented in terms of Legendre or Laguerre polynomials. Hence, a criterion is required to choose one of two far-field approximations for a given application, which can be expressed in a complex plane of the surface impedance. Also, we approximate the required partial derivatives of Sommerfeld integral and numerically verify the accuracy of the approximation.