• The Transactions of the Korea Information Processing Society
• /
• v.6 no.1
• /
• pp.75-83
• /
• 1999

recently, a new hypercube-like interconnection network, the Z-cube, was proposed. The Z-cube retains most good topological properties, however, its node degree is 3/4 of hypercube's one. Considering hardware implementations, the Z-cube is a good alternative to the hypercube. In this paper, we obtained the diameter, fault diameter and the average distance between two nodes to evaluate the communication performance of the Z-cube. The recursive structure, the shortest path between two nodes I Z-cube and recurrence relation on the average distance were deduced, and node disjoint path was introduced. Although it is generally expected that the communication performance in an interconnection network with reduced node degree falls as much as that, this paper shows that the Z-cube's diameter is the same as the hypercube's one and the average distance between two nodes in Z-cube is about 1.125 times the average distance between two nodes in the hypercube and the fault diameter of Z-cube ranges approximately from 1.4times to 1.7times the fault diameter of the hypercube.

• Journal of Korean Society of Forest Science
• /
• v.87 no.2
• /
• pp.173-178
• /
• 1998

Twelve Camellia sinensis populations were studied to investigate the biomass distribution related to stand structure. With increasing mean age of the population, mean root collar diameter increased, while mean height, density and root collar area had no correlation with the age. The result of dimension analysis after cutting the sample trees showed that dry weights of stems +branches and root were exponentially increased and dry weights of current leaves and twigs were linearly increased with increasing root collar diameter. However, the dry weight of older leaves was not related to the root collar diameter. The range of total biomass was 1,162~11,474kg/ha and the range of current leaf biomass was 165~1,341kg/ha. The range of T/R ratio was 1.5~2.8. The biomass of stems+branches and root were significantly correlated with the root collar area of the population and were not significantly correlated with the mean age, mean root collar diameter and density of the population. The biomass of current leaves and twigs were significantly correlated with the root collar area and density of the population.

• Journal of Korean Society of Forest Science
• /
• v.41 no.1
• /
• pp.19-25
• /
• 1979

The study was carried out to determine the frequency distribution of trees by diameter classes according to the method of Bruce and Reineke's alignment with the data of pitch pine (Pinus rigida Miller) and Italian poplar (Populus euramericana Guinier) which are prepared for the purpose of yield table construction. The results obtained are summarized as follows: 1. All through the tree species studied, when their diameters were larger, their distribution range became wider, while the percentage of their distribution frequency became lesser. 2. As for frequency percentage of trees in an average D.B.H. of stands, it became smaller when average D.B.H. of the stand is larger: the percentage of pitch pine stand is 36.2 and that of Italian poplaris 29.0. 3. In case of smaller D.B.H. under the average, the larger their D.B.H. became, the lesser the cumulative frequency percentages became.

• Journal of Korean Society of Forest Science
• /
• v.61 no.1
• /
• pp.1-7
• /
• 1983

In the estimation of diameter distribution in a stand using Weibull distribution function, the calculation method of experimental distribution was presented in previous paper. This study was to estimate the diameter distribution of Korean pine stands by Weibull distribution which represents Gamma function, with mean diameter and mean basal-area diameter of the random sample trees. The results obtained fitted the diameter distribution in experimental stands. Thus, this method appears to be used for the estimation of diameter distribution in a stand as well as for the analysis and prediction of stand construction for the future.

• Journal of Korean Society of Forest Science
• /
• v.100 no.1
• /
• pp.62-69
• /
• 2011

Six commonly used non-linear growth functions were fitted to individual tree height-dbh data of eight major tree species measured by the $5^{th}$ National Forest Inventory in Chungcheong province. A total of 2,681 trees were collected from permanent sample plots across Chungcheong province. The available data for each species were randomly splitted into two sets: the majority (90%) was used to estimate model parameters and the remaining data (10%) were reserved to validate the models. The performance of the models was compared and evaluated by $R^2$, RMSE, mean difference (MD), absolute mean difference (AMD) and mean difference(MD) for diameter classes. The combined data (100%) were used for final model fitting. The results showed that these six sigmoidal models were able to capture the height-diameter relationships and fit the data equally well, but produced different asymptote estimates. Sigmoidal growth models such as Chapman-Richards, Weibull functions provided the most satisfactory height predictions. The effect of model performance on stem volume estimation was also investigated. Tree volumes of different species were computed by the Forest Resources Evaluation and Prediction Program using observed range of diameter and the predicted tree total height from the six models. For trees with diameter less than 30 cm, the six height-dbh models produced very similar results for all species, while more differentiation among the models was observed for large-sized trees.

• The Journal of Korean Academy of Prosthodontics
• /
• v.50 no.3
• /
• pp.156-161
• /
• 2012

Purpose: This study was conducted to obtain difference in fracture strength according to the diameter of one-body O-ring-type of mini implant fixture, to determine the resistance of mini implant to masticatory pressure, and to examine whether overdenture using O-ring type mini implant is clinically usable to maxillary and mandibular edentulous patients. Materials and methods: For this study, 13 mm long one body O-ring-type mini implants of different diameters (2.0 mm, 2.5 mm and 3.0 mm) (Dentis, Daegu, Korea) were prepared, 5 for each diameter. The sample was placed at $30^{\circ}$ from the horizontal surface on the universal testing machine, and off-axis loading was applied until permanent deformation occurred and the load was taken as maximum compressive strength. The mean value of the 5 samples was calculated, and the compressive strength of implant fixture was compared according to diameter. In addition, we prepared 3 samples for each diameter, and applied loading equal to 80%, 60% and 40% of the compressive strength until fracture occurred. Then, we measured the cycle number on fracture and analyzed fatigue fracture for each diameter. Additionally, we measured the cycle number on fracture that occurred when a load of 43 N, which is the average masticatory force of complete denture, was applied. The difference on compressive strength between each group was tested statistically using one-way ANOVA test. Results: Compressive strength according to the diameter of mini implant was $101.5{\pm}14.6N$, $149{\pm}6.1N$ and $276.0{\pm}13.4N$, respectively, for diameters 2.0 mm, 2.5 mm and 3.0 mm. In the results of fatigue fracture test at 43 N, fracture did not occur until $2{\times}10^6$ cycles at diameter 2.0 mm, and until $5{\times}10^6$ cycles at 2.5 mm and 3.0 mm. Conclusion: Compressive strength increased significantly with increasing diameter of mini implant. In the results of fatigue fracture test conducted under the average masticatory force of complete denture, fracture did not occur at any of the three diameters. All of the three diameters are usable for supporting overdenture in maxillary and mandibular edentulous patients, but considering that the highest masticatory force of complete denture is 157 N, caution should be used in case diameter 2.0 mm or 2.5 mm is used.

• Journal of the korean academy of Pediatric Dentistry
• /
• v.30 no.3
• /
• pp.502-509
• /
• 2003

After 800 students of Chonbuk National University was examined, 86 people (male : 43, female : 43, mean age : 22.2 years old) was selected as a group of normal occlusion. From their gypsum cast, this conclusion was obtained. 1. Intra-observer measurement errors in buccolingual diameter, maxillary lateral incisors have somewhat bigger errors. In mesiodistal diameter, maxillary first molars and maxillary second molar have bigger numerical value. Mean errors of measurement are 0.051mm at buccolingual diameter of crown and 0.083mm at mesiodistal diameter. 2. Fluctuating asymmetry is 0.030 average in buccolingual diameter, and 0.037 average in mesiodistal diameter. Statistically there are no big differences. 3. Male has longer buccolingual diameter than female in every permanent teeth. Teeth which have statistical difference in buccolingual diameter are maxillary lateral incisor, maxillary canine, maxillary second molar, mandibular central incisor, mandibular canine, mandibular second premolar, and mandibular first molar. In mesiodistal diameter maxillary central incisor, maxillary canine, and mandibular first molar have statistically difference. 4. Tooth which has the biggest difference depending on gender is maxillary lateral incisor in buccolingual diameter and mandibular canine in mesiodistal diameter. 5. Both sexes have similar crown index. Male has bigger value of crown module measurement and crown area measurement in every tooth. Crown area considered as size of tooth from occlusal surface was bigger in male than in female statistically except some teeth, maxillary first premolar, mandibular lateral incisor, first premolar and second premolar.

• Applied Microscopy
• /
• v.16 no.2
• /
• pp.25-34
• /
• 1986

The endocrine cells of the stomach and duodenum of the pond tortoise (Amyda sinensis) have been studied by electron microscopy. At least six types of endocrine cells could be identified in these regions. Type I cells were characterized by having pleomorphic or medium sized granules ($100{\sim}430nm$ in diameter, mean; 290 nm) which were moderate in electron density. Type II cells were characterized by having pleomorphic or medium sized granules ($190{\sim}430nm$ in diameter, mean; 280 nm) which were high in electron density. Type III cells were characterized by having large oval or irregular granules($170{\sim}650nm$, mean: 430 nm) with wide vesicular halo which were high in electron density. Type IV cells were characterized by having round or medium sized granules($140{\sim}370nm$, mean; 240 nm) which were low to moderate in electron density and showed a very thin halo. Type V cells were characterized by having large round or oval granules($300{\sim}600nm$, mean; 410 nm) which were low to moderate in electron density and showed a dense core and a wide clear halo. Microfilaments were also found in the cytoplasm. Type VI cells were characterized by having round and small granules($100{\sim}220nm$, mean; 160 nm) which were low to moderate in electron density and showed a very thin halo or crystalline structure of the contents. Many microfilament bundles were also found in the cytoplasm.

• Korean Journal of Plant Resources
• /
• v.20 no.1
• /
• pp.7-11
• /
• 2007

This study was conducted by estimate of leaf characteristics and growth performance among selected 20 families progenies of Hovenia dulcis var. koreana Nakai. Mean seedling height and root-collar diameter in whole progenies showed 61.6cm, 6.98mm, respectively. Mean seedling height of KW 2-5 family was 79.3cm and it was higher than that of other families. JN 2-2 family had highest value, 9.16mm, in mean of root-collar diameter. Growth performances of KW 2-5 and JN 2-2 families showed 57% (in seedling height), 53% (in root-collar diameter) superior to those of lowest marked families. The selection level based on growth performances, which are seedling height over 75.0cm and root-collar diameter over 8.0mm, were applied on whole families, and two families selected (KW 2-5, JN 2-2). The selection effects from selected families was evaluated as 125% compared to the mean of whole families. The coefficient of variation (C.V) appeared wide range, $9.4{\sim}42.4%$, in estimated leaf characteristics. Particularly, C.V of petiole length (PL) and petiole diameter (PD) showed 42.4% and 28.7%, respectively. Their were higher value than other leaf characteristics. Analysis of variance for all leaf characteristics were significantly different among families. Also, there had positive correlation between most leaf characteristics except the correlation between leaf length (LL) and leaf morphological index (LMI, LW/LL). Particularly, the correlation between leaf length and leaf width (LW) showed the highest correlation.

• Journal of the Computational Structural Engineering Institute of Korea
• /
• v.20 no.4
• /
• pp.407-416
• /
• 2007

Fuel spray nozzle has a critical effect on combustion characteristics. Mass flow rate and SMD(sauter mean diameter) were selected as design variables by using the experiment data of various types of duplex fuel nozzles for the swirl atomizers. The sensitivity of each design variable on the mass flow rate and SMD was analyzed and the uniformity of mass flow rate was investigated through the shape optimization of duel-orifice-type swirl atomizers. The design variables that have a little effect on the optimum design were excluded using the DOE(design of experiments) method, which enabled the optimization of sensitive design variables on mass flow rate and limit tolerance. The SMD of the research spray nozzle that was used in this study was found to be most similar to that of the calculation results using the Jasuja's SMD relationship. This study showed the specific characteristics of duel orifice type swirl atomizers and the optimization of these kinds of nozzle. This study provided the optimization design of mass flow rate and its allowable tolerance.