• Journal of Satellite, Information and Communications
• /
• v.7 no.2
• /
• pp.72-75
• /
• 2012

A solar array makes a Solar Array Regulator (SAR) for Low-Earth-Orbit satellite have different small signal characteristic. Therefore, an Average-Current-Mode (ACM) controller cannot control the BUCK-BOOST type SAR which operates in a current region of the solar array. In this paper, we present the Pseudo-Continuous Current Mode (PCCM) BUCK-BOOST Type SAR which can be controller by the ACM Controller. We explain the circuit operation of the PCCM BUCK-BOOST Type SAR, derive its small signal transfer function and design ACM Controller. Finally, we verify the ACM control of the PCCM BUCK-BOOST Type SAR by using a simulation.

• Proceedings of the KIPE Conference
• /
• 2005.07a
• /
• pp.442-444
• /
• 2005

본 논문에서는 평균전류모드제어를 이용하는 컨버터의 연속시간 소신호 모델을 구한다. 평균전류모드제어에 일반적으로 사용되는 보상기를 적용한 컨버터의 해석을 위해 샘플러를 전류루프에 포함시켜 해석한다. 기존 모델에서는 정확히 해석하기 어려웠던 전류루프 이득의 고주파 영역 해석이 제안한 모델을 이용함으로써 쉽게 해결할 수 있으며, 시스템의 안정성을 결정하는 고주파 영역에서의 주파수 응답 특성을 제안한 모델이 우수한 성능으로 예측 가능함을 보인다.

• The Transactions of the Korean Institute of Power Electronics
• /
• v.10 no.4
• /
• pp.347-355
• /
• 2005

In this paper, a new continuous~time small signal model of an average current mode control is proposed. Sampling effect Is considered to obtain the proposed small signal model. By the proposed model, the high frequency response characteristics of current loop gain might be predicted accurately compared to previous models. And this leads the prediction of inductor current response of the proposed model to be accurate compared to others. In order to show the usefulness of the proposed model, prediction results of the proposed model are compared to those of the circuit level simulator, PSIM and experiment.

• The Transactions of the Korean Institute of Power Electronics
• /
• v.10 no.3
• /
• pp.219-225
• /
• 2005

In this paper, a new discrete-time small signal model of an average current mode control is proposed to predict the inductor current responses. Compared to the peak current mode control, the analysis of the average current mode control is difficult because of its presence of an compensation network. By utilizing sampler model, a new discrete-time small signal model is derived and used to predict the behaviors of an inductor current of average current mode control employing generalized compensation networks. In order to show the usefulness of the proposed model, prediction results of the proposed model are compared to those of the circuit level simulator, PSIM and experiment.

• Journal of the Korea Society of Computer and Information
• /
• v.28 no.12
• /
• pp.231-238
• /
• 2023

For boost PFC (Power Factor Correction) converters, various control methods are being studied to achieve unity power factor and low THD (Total Harmonic Distortion) of AC input current. Among them, average current mode control, which controls the average value of the inductor current to follow the current reference, is the most widely used. However, nowadays, as advanced digital control becomes possible with the development of digital processors, predictive control of boost PFC converters is receiving attention. Predictive control is classified into predictive current mode control, which generates duty in advance using a predictive algorithm, and model predictive current control, which performs switching operations by selecting a cost function based on a model. Therefore, this paper simply explains the average current mode control, predictive current mode control, and model predictive current control of the boost PFC converter. In addition, current control under entire load and disturbance conditions is compared and analyzed through simulation.

• Proceedings of the KIEE Conference
• /
• 2000.07b
• /
• pp.1080-1082
• /
• 2000

본 연구에서는 부하의 급격한 변화 또는 병렬컨버터를 구성하는 단위컨버터의 고장 발생 시 안정적인 병렬컨버터의 운용을 위한 연구를 수행하였다. 단 위컨버터는 응답특성을 개선하기 위하여 평균전류모드제어를 채택하였으며, 병렬컨버터의 부하전류분담을 위하여 최대전류 제어법을 이용하였다. 병렬컨버터의 모델을 도출하여 부하전류분담 제어에 따른 동작특성을 분석하였다. 급격한 부하변화와 단위컨버터의 고장발생 시 안정된 병렬컨버터의 특성을 실험을 통하여 확인하였다.

• Journal of the Korean Institute of Illuminating and Electrical Installation Engineers
• /
• v.22 no.6
• /
• pp.34-43
• /
• 2008

The state-space average model is extended to buck-boost, and buck-boost topology switching mode DC/DC converters and modified to have higher precision without increment of computation. The modified model is used in continuous conduction mode(CCM) switching DC/DC converters and some significant conclusions are derived. This paper discusses the discontinuous conduction mode(DCM) modeling of DC/DC converter and critical characteristic using average model of switch. Average model of switch approach is expended to the modeling of boundary conduction mode DC/DC converters that operate at the boundary between continuous conduction mode(CCM) and discontinuous conduction mode(DCM). Frequency responses predicted by the average model of switch are verified by simulation and experiment. A prototype featuring 15[V] input voltage, 24[V] output voltage, and 24[W] output power using MOSFET.

• Proceedings of the KIPE Conference
• /
• 2013.07a
• /
• pp.254-255
• /
• 2013

본 논문에서는 저항센서와 바이패스 스위치를 이용한 평균 전류 모드 제어의 부스트 컨버터 저손실을 측정하는 방법을 제안한다. 일반적으로 저항을 이용한 전류센싱 방법은 손실을 가지며 이는 전체 시스템의 효율을 감소시키게 된다. 제안된 전류 측정 기법은 저항센서에 병렬로 바이패스 스위치를 적용하여 전류센서에서 발생되는 손실을 바이패스 스위치를 통해 손실을 최소화 할 수 있다. 본 논문에서는 50W급 평균 전류 모드 부스트 컨버터를 제작하여 바이패스 스위치를 통한 효율 개선을 아날로그 회로로 구현하여 검증하였다.

• Journal of the Korean Institute of Illuminating and Electrical Installation Engineers
• /
• v.22 no.12
• /
• pp.157-163
• /
• 2008

In the multi-phase interleaved converter with peak current mode control, current imbalance is measured when inductors of converter module are not exactly identical. In this paper current-sharing controller is proposed to balance phase current of converter modules. It also is designed to have good transient response. Proposed method implemented the 2-phase and 4-phase interleaved boost converter with imbalanced inductance. Experimental results verify the performance of Current share during the transient state of converter.

• The Proceedings of the Korean Institute of Illuminating and Electrical Installation Engineers
• /
• v.8 no.5
• /
• pp.56-64
• /
• 1994

본 논문은 직류초퍼구동 전동기 제어시스템을 해석 대상으로 하여 전류 연속모드와 전류 불연속모드의 양 모드 동작시에 있어서의 해석을 상태변수법과 상태평균화법을 적용하여 해석하였으며 두 해석 방법의 결과를 비교 검토함과 동시에 상태평균화법에 의하여 시스템의 해석이 근사적이지만 해석이 용이하다는 것을 나타내고 있다. 또한, 본 시스템의 궤환루프 제어시스템에 있어서 상태평균화법을 이용한 평형점 근방의 근사 선형화 방법을 적용함으로써 전달 매트릭스의 형태로 동특성을 표현할 수 있으며, 이것을 이용한 선형 제어법을 적용하여 궤환루프 제어계의 설계기법을 제시하고 있다.