• Transactions of the Korean Society of Automotive Engineers
• /
• v.5 no.3
• /
• pp.95-105
• /
• 1997

A diesel engine has become smaller and higher, thus sprays injected in high speed may be impinged on a small combustion chamber wall if there is not enough strong swirl. Those combustion chambers should have proper measures to avoid the spray impinged and deposited on a wall. One of the measures is a chamber prepared impingement parts raised on a chamber wall surface. In this system a spray is injected into the raised pip, broken into a number of smaller drops and spreaded out away from the wall surface. Therefore the fuel droplets distributes over inside of the combustion chamber. In this study, the positions, sizes and angles of the raised land are discussed to help the chamber design using spray wall impaction. The characteristics of the spray impinged on various lands are investigated and compared with each other. Then chamber shapes are discussed with the spray characteristics and the proper positions and size are proposed in some chamber volumes.

• Proceedings of the Korean Nuclear Society Conference
• /
• 1995.05b
• /
• pp.651-657
• /
• 1995

고리원자력1호기에서 각각 2주기, 4주기동안 연소한 핵연료봉 G33-N2(평균연소도:3464MWD/MTU) 및 G23-14(평균연소도:13917MWD/MTU)에 대하여 와전류시험을 수행한 결과 G33-N2 핵연료봉 하단으로부터 각각 2290mm, 2878mm 위치에 관통결함신호와 내부결함신호를 얻었다. 또한 G23-l4 핵연료봉에서는 ridge 와전류신호를 획득하였다. 비파괴적 와전류시험을 통하여 관통결함 및 내부결함으로 예측된 위치에서 파괴적 금속조직시험을 수행하여 얻은 결과는 와전류시험결과와 잘 일치하였다 G23-l4 핵연료봉에서 획득한 ridge 와전류신호는 직경측정시험결과와 비슷한 경향을 보여 주었다. 따라서 와전류시험을 통하여 핵연료봉에 대한 건전성 평가 도구로서의 그 신뢰성이 양호함을 실증하였으며 핵연료봉의 ridge 정보도 제공할 수 있음을 입증하였다.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2010.02a
• /
• pp.332-332
• /
• 2010

진공펌프의 배기성능 지표들을 정량적으로 측정하기 위해서 사용하는 표준용기에 관한 규격들은 대체로 일치하는 사양들을 제시하지만 유독 기체도입 도관의 굵기에 대해서는 다양한 방식으로 규정하고 있어서 혼란스럽다. 현재 제정중인 ISO 규격에서는 도관 굵기를 용기 내경의 10분의 1로 규정하고 있는데 대형 펌프 용 표준용기에 맞춘다면 도관의 굵기가 지나치게 커질 수 있다. 과연 이렇게 굵은 도관이 정밀한 측정을 위해 꼭 필요한지 또는 오히려 방해가 되는 것은 아닌지 검토해 보기 위해 도관 굵기에 따라 도관출구를 빠져나오는 입자들과 오리피스 및 펌프 흡기구에 입사하는 입자들의 등방성에 대해 살펴보았다 계산 결과에 의하면 도관의 굵기는 오리피스 및 펌프 흡기구에 입사하는 입자들의 평균 방향 여현 값에 전혀 영향을 미치지 않는 것으로 나타났으며 반면에 도관이 오리피스나 흡기구 면에 국부적으로 그림자를 드리우거나 입자 분포와 평균 방향여현 분포를 왜곡시키지도 않았다. 즉 기체 도입 도관을 가늘게 해도 빔효과가 계속 전파되어서 측정에 악영향을 미치지 않으므로 별 문제가 안 되고, 도관이 규정되어 있는 범위 안에서 어느 정도 굵어져도 입자의 흐름을 방해한다는 증거는 없다는 뜻이다. 그렇다면 도관의 굵기를 한 값으로 못 박기보다 넓은 범위를 주어 가공 능력에 따라 사용자가 적절히 크기를 선택할 수 있도록 하는 것이 합리적이라고 판단된다.

• Journal of the Korean Wood Science and Technology
• /
• v.36 no.1
• /
• pp.69-78
• /
• 2008

Shearing strength test in tension type was investigated to determine the shear resistance of bolt and drift-pin connection of domestic larix glulam. The specimen was connected with bolt and drift-pin in the inserted plate type, and only bolt in the side plate type. The diameter of bolt and drift-pin used in the experiment are 12, 16 and 20 mm. The hole of bolt was drilled at the end-distance 5 d and 7 d. Tension load was loaded in the direction parallel to grain. The shear resistance was evaluated according to end-distance through this, the yield load was compared with the experimental yield load, using Larsen's formula. The prototype design strength is based on the yield load of end-distance 7 d and the reduction factor of end-distance 5 d was calculated. The results were as follows. 1. The average of maximum load of drift-pin connection was higher by 3~30% at the inserted type than at bolt connection with increasing diameter. In bolt connection, the average of maximum load of the side type was 1.54~2.07 times higher than that of the inserted type. In the same diameter, the average of maximum load of end-distance 7 d was higher by 8~44% than that of 5 d. 2. The bearing stress was 1.16~1.41 times higher at the inserted connection than at drift-pin connection, and 1.37~1.86 times higher at 7 d than at 5 d. Also, when the slenderness ratio was below 7.5 at drift-pin connection and below 6.0 at inserted connection, the lateral capacity was good. 3. The ratio of the experimental yield load and the predicted yield load calculated by Larsen's formula proposed by Larsen was 0.80~1.10 at inserted connection, and 0.75~1.46 at side connection. 4. When the inserted bolt connection was based on the yield load of end-distance 7 d, the reduction factor was 0.89 at 12 mm connection, 0.93 at 16 mm and 0.85 at 20 mm. The reduction factor was 0.89 at 12 mm the inserted drift-pin connection, 0.93 at 16 mm, 0.93 at 20 mm. The reduction factor was 0.79 at the side connection of the 12 mm bolt connection and 0.80 at 16 mm.

• Journal of Korean Society of Forest Science
• /
• v.111 no.1
• /
• pp.125-135
• /
• 2022

In this study, growth changes of the diameter at breast height (DBH), height, basal area, volume, and biomass of Korean white pine (Pinus koraiensis Siebold & Zucc.) on a plantation were examined via long-term monitoring. In addition, this study was performed to provide the basic data for timber production in line with DBH class by comparing the growth of the relative DBH size. Growth characteristics according to DBH class were analyzed by categorizing trees into five classes based on sorted DBH rankings: class I (1%-20%; upper 20%), class II (21%-40%), class III (41%-60%), class IV (61%-80%), class V (81%-100%; lower 20%). A total class (0%-100%) was also used. Total increment and mean annual increment (MAI) were calculated using data from nine measurements taken over 39 years. Tree characteristics based on average values and stand characteristics based on unit area per hectare were examined. According to the total increments of variables, the differences in DBH, basal area, volume, and biomass among classes I-V increased over time, whereas the height difference did not continually increase. According to MAI, the maximum DBH value was 0.92 cm·yr^-1 at age 23 in class I, whereas the maximum value in all trees was 0.69 cm·yr^-1 at age 17. The maximum value of height MAI for class I was 0.52 m·yr^-1 at age 23, whereas that for all trees was 0.49 m·yr^-1 at age 20. In terms of basal area, volume, and biomass growth at tree-and stand-level, the maximum MAI of class I and all trees was not observed during the measurement period. Therefore, additional long-term monitoring data are required to determine the maximum MAI of the variables.

• Horticultural Science & Technology
• /
• v.30 no.1
• /
• pp.97-100
• /
• 2012

A new gerbera (Gerbera hybrid Hort.) 'Azalin' was bred by the National Institute of Horticultural & Herbal Science in 2009. 'Basic' and 'Rosabella' which had pink color and semi-double flower were crossed in 2006. After investigation of the characteristics for four years (from 2006 to 2009), it was selected specially for the use of cut flower. The 'Azalin' had brilliant pink color (RHS RP68A) with green disc center. The flower was semi-double and 10.6 cm in diameter. It had a thick peduncle of which upper and lower width were 3.7 mm and 5.5 mm, respectively. The average days to first flowering of 'Azalin', 88.5 days, was approximately 8.7 days earlier than the control cultivar. And its average yield, 55.8 stems per plant, was also 7.4 stems per plants more than the control cultivar.

• 한국생물공학회:학술대회논문집
• /
• 2003.04a
• /
• pp.327-330
• /
• 2003

The denitrification characteristics of free- and gel- D photosynthetic bacteria were studied. At various salt concentrations (0, 1, 2, 3.5%), the maximum specific growth rates were found to be 0.22, 0.22, 0.20 and 0.11 $h^{-1}$, respectively. At lower pH, pH affected the growth significantly. In experiments of PVA beads, the maximum $N_2$ production rate $(dN_2/dt)$ were calculated to be 0.09-0.10 (D= 0.7cm) and 0.09-0.11(D= 1.0cm) ml/h, respectively, and those per bead were 5 and $5.5\;{\mu}l$/h/bead.

• Science of Emotion and Sensibility
• /
• v.19 no.3
• /
• pp.43-50
• /
• 2016

The uniform nanofibers of polyurethane with different contents of Juniperus Chinensis extracts were successfully prepared by electrospinning method. Polyurethane is widely used as functional polymers in the industrials, medical field as their properties can be tailor-made by adjusting their compositions. Juniperus Chinensis has been reported for anti-tumor, anti-bacterial, anti-fungal, and anti-viral activities. PU/Juniperus Chinensis extracts composite nanofibers were produced at different Juniperus Chinensis extracts concentrations (0.25, 0.5, 1, 1.5wt.%). The effects of the major parameters in electrospinning process such as tip to collector distance (TCD), voltage, polymer concentration on the average diameter of electrospun nanoweb were investigated. As results, 12wt% PU solution concentration, 8kV applied voltage and 15cm tip to collector distance were identified as optimum conditions for electrospinning the composite nanofibers. The diameter and morphology of the nanocomposite nanofibers were confirmed by a scanning electron microscopy (SEM). The resulting fibers exhibited a uniform diameter ranging from 435nm~547nm. It has been found that the average diameters of fibers decreased by the adding of Juniperus Chinensis extracts. These nanowebs can be used for medical materials, protective clothing, and antimicrobial filters.

• Journal of Korean Society of Environmental Engineers
• /
• v.22 no.7
• /
• pp.1263-1271
• /
• 2000

This study investigated the floc structure and removal of turbidity and organic matter by alum coagulation. Results of this study indicated that sweep floc and charge neutralization area were shifted to more acidic region than that in the Amirtharajah's diagram. This was caused by organic matter present in the raw water. Removal regions of turbidity and organic matter were generally overlapped. However, organic matters was removed better at lower pH than turbidity. Floc structure was characterized by measuring fractal dimension and volume diameter using AIA and SALLS. SALLS method was found to be more reliable than AIA method. Floes in sweep floc region had larger size and fractal dimension than flocs in charge neutralization region. As pollutant removal increased, larger fractal dimension and size of floc were measured.

• Research in Plant Disease
• /
• v.13 no.3
• /
• pp.207-210
• /
• 2007

A stem and root rot disease of English ivy (Hedera helix) was found in the flower market, Jeonju, Chonbuk province, Korea in May 2007. A Phytophthora species was isolated from the diseased part of the plant. Based on the mycological properties and pathogenesis the isolate was identified as Phytophthora cinnamomi. The fungus produce ovoid sporangium which was ovoid to spherical and obpyriform which is noncaducous, non-papillate and averaged $33.8{\times}16{\mu}m$ in dimension. Chlamydospores were abundantly produced on agar media and sized about $19.7{\mu}m$ in diameter. The fungus was heterothallic and A1 mating type. Oospores were measured $26.2{\mu}m$ in size. Optimum temperature for growth of the fungus was 25 to $30^{\circ}C$. Up to our knowledge, this is the first report demonstrating the stem rot on English ivy caused by P. cinnamomi in Korea.