• Transactions of the Korean Society of Mechanical Engineers
• /
• v.9 no.6
• /
• pp.732-742
• /
• 1985

Measurements of mean velocity and turbulence characteristics are obtained with a linearized constant temperature hot-wire anemometer in a two-dimensional turbulent jet discharging parallel to a flate. Wall static pressure distribution is also measure. The Reynolds number based on the jet nozzle width (D) is about 42,000 and the step height is 2.5D. The reattachment length is found to be 7.5D by using both wool tuft and oil methods. Upstream of the reattachment point, there exist double coherent structures and mean velocity, Reynolds stresses and triple product profiles are asymmetric about jet center line due to the influence of streamline curvature and recirculating flow region. Near the reattachment point, wall static pressure and turbulence quantities change its shape rapidly because of the large eddies by the solid wall. Especially, turbulence intensity has a maximum value in the reattachment regin, then decreases slowly in the redeveloping wall jet ragion. Downstream of X/D=14, a single large scale eddy structure is formed. Far downstream affer the reattachment(X/D.geq.18) mean velocity profile, the decay of maximum velocity and the variation of jet half width are nearly similar to those of plane wall jet, but the Reynolds stresses are higher than those of the latter.

• Transactions of the Korean Society of Mechanical Engineers B
• /
• v.39 no.4
• /
• pp.335-341
• /
• 2015

In this study, we analyzed a two-dimensional Stokes flow through a microchannel containing projections with constant spacing attached to each wall. The projections on the top and bottom walls were semi-circular in shape, with in-phase locations. By considering the periodicity and symmetry of the flow, the eigenfunction expansion and least squared error method were applied to determine the stream function and pressure distribution. For some typical radius and spacing values, the streamline patterns and pressure distributions in the flow field are shown, and the shear stress distributions on the boundary walls are plotted. In addition, the average pressure gradients in the microchannel are also calculated and shown with the radius and spacing of the projections. In particular, the results for the case of extremely small gaps between the projections on the top and bottom walls are in good agreement with the lubrication results.

• Journal of the Korean Society of Marine Environment & Safety
• /
• v.18 no.4
• /
• pp.352-359
• /
• 2012

An experiment was carried out to figure out the turbulence flow characteristics in the wake of the transom stern's 2-dimensional section by 2-frame grey level cross correlation PIV method at Re= $3.5{\times}10^3$, Re= $7.0{\times}10^3$. The angles of transom stern are $45^{\circ}$(Model "A"), $90^{\circ}$(Model "B") and $135^{\circ}$(Model "C") respectively. The depth of wetted surface is 40mm from free surface. Strong turbulence intensity appears at the interaction between the flow separation of the bottom of a model and the free surface. This study provides statistic flow information such as turbulence intensity, Reynolds stress and turbulence kinetic energy. Model C type (Raked transom) has low Reynolds stress and turbulence kinetic energy.

• Journal of Navigation and Port Research
• /
• v.34 no.6
• /
• pp.429-434
• /
• 2010

The experimental study of the hull surface roughness on a developing turbulent boundary layer which exposed to a variety of operating environments were investigated by performing particle image velocimetry(PIV) in a circulating water channel. The Reynolds number based on the width of roughness was about Re=1000. the roughness elements used were periodically arranged two-dimensionally. the flow visualization, time-mean velocity fields and vorticity fields to measure the flow characteristics were obtained. The investigation shows that the vortex generation and its progress inside the walls. And the center of the vortex was located at the middle of the height of the surface roughness.

• Proceedings of the Korean Institute of Industrial Safety Conference
• /
• 1997.11a
• /
• pp.43-48
• /
• 1997

The smoke filling process for the atrium space containing a fire source is simulated using two types of deterministic fire modus: Zone model and Field model. The zone mode used is the CFAST(version 1.6) mode developed at the Building and Fire Research laboratories, NIST in the USA. The lied model is a self-developed fire field model based on Computational Fluid Dynamics(CFD) theories. This article is focused on finding out the smoke movement and temperature distribution in atrium space which is cubic in shape. A computational procedure for predicting velocity and temperature distribution in fro-induced flow is based on the solution, in finite volume method and non-staggered grid system, of 3-dimensional equations for the conservation of mass, momentum, energy, species and so forth. The fire model i. e. Zone model and Field model predicted similar results for Ire clear height and the smoke layer temperature.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2008.05a
• /
• pp.1082-1086
• /
• 2008

소양강댐 유역에서 몇 년간 계속되는 고탁수 문제가 좀처럼 개선되고 있지 않는 실정이다. 탁수발생의 원인은 여러 가지가 있지만 농경지를 중심으로 유입되는 토양유실이 가장 직접적인 원인으로 지적되고 있다. 특히, 고랭지 농경지에서 소득 작물에 대한 연작피해 경감, 작물의 생산성 향상과 농민들의 소득 증대와 연관되어 무분별하게 농경지에 행해진 객토와 농약 및 비료는 수질 악화의 매우 큰 영향을 미치고 있다. 이러한 문제로 인하여, 토양유실량 추정을 위한 여러 모형들이 개발되었다. 이 중, SWAT 모형은 미국 농무성의 농업연구소에서 개발된 유역단위 모형으로 대규모의 복잡한 유역에서 장기간에 걸친 다양한 종류의 토양과 토지이용 및 토지관리 상태에 따른 수문과 유사 및 농업화학물질의 거동에 대하여 예측하기 위해 개발된 모형이다. 이 SWAT모형은 유역내 수문 및 유사 모의시, DEM을 기반으로 유역 평균경사도를 이용하여 경사도-경사장 관계식 산정 경사장을 유역내 모든 수문학적 반응단위 (HRU: Hydrologic Response Unit)의 동일하게 적용한다. 이는 SWAT 모의 유사량과 실측 자료에 있어서 큰 차이를 초래할 수 있다. 따라서 본 연구에서는 해안면 지역의 모든 농경지에 대해 강원발전연구원에서 전수 조사한 실측 경사장 및 경사도 자료를 반영할 수 있도록 소유역내 모든 HRU에 면적 가중 경사도/경사장을 할당해 주는 프로그램을 개발하여 준분포 모형인 SWAT의 단점을 극복하였다. 그 결과 유출량의 경우 면적 가중 실측경사장 및 경사도를 적용 유무에 따라 월 평균유량 3,951,537 m3/month, 3,953,947 m3/month로 2,410 m3/month의 큰 차이를 보이지 않았지만, 유사량의 경우 면적 가중 실측경사장 및 경사도 적용 하였을 경우 10,826 ton/month 이고, 기존 SWAT 예측 유사량은 월평균 3,642 ton/month으로 7,184 ton/month (66.4 % 차이) 큰 차이를 보였다. 이러한 결과는 SWAT 모형 적용시 경사장 및 경사도 산정에 따라, 유사량이 과소 또는 과대 평가 될 수 있음을 보여준다.

• Journal of Advanced Marine Engineering and Technology
• /
• v.35 no.2
• /
• pp.264-270
• /
• 2011

The Characteristics of the flowfield around three circular cylinders in tandem arrangement was investigated by PIV. Strouhal numbers, vorticity, velocity vectors and velocity profiles were observed at centre-to-centre space ratios of P/D=1.25~3.75, and Reynolds number of Re=$3.0{\times}10^3{\sim}5.0{\times}10^3$. As the results the Strouhal numbers measured in the rear region of 3rd the cylinder were distinguished three kind of regions with the space ratios and The flow pattern in the wake of each cylinder was different according to these regions. The time averaged flow at region of each cylinder was almost stagnated and the size of the stagnated region was small in order of 1st, 2nd and 3rd cylinder. The direction of vortex at the front and rear region of 2nd cylinder was opposed each other with the small difference(${\alpha}= {\pm}5^{\circ}$) of the attack angle ${\alpha}$.

• The Korean Journal of Rheology
• /
• v.10 no.1
• /
• pp.1-6
• /
• 1998

액체와 액체를 교반할 경우 혹은 두가지 이상의 상이 함께 반응하는 화학공정의 경 우에서는 비상용성인 액체들을 난류조건하에 분산시켜 섞이게 한다. 부산계로 구성된 중합 반응기의 경우 분산입자의 크기는 최종제품의 생산성 및 품질에 큰 영향을 미치게 되므로 분산입자의 크기를 예측하는 것은 대단히 중요하다. 이러한 분산계에서 분산입자의 크기는 분산입자가 겪는 유동장에 의해 결정된다. 오일/오일 분산계로 이루어진 고분자 유탁액의 난류교반시 유동장은 종종 점성전단 부영역에 속하게 되는데 이경우의 분산입자의 크기를 예측하는 모델에 대한 연구는 별로 이루어지지않았다. 본연구에서는 오일/오일 분산계의 고 분자 유탁액에 대한 분산입자의 크기를 예측하는 모델식을 유체동력학적인 이론을 배경으로 하여 개발하였다. 개발한 모델식을 난류교반을 겪은 오일/오일 분산계를 거쳐 생산된 제품 인 내충격성 폴리스티렌으로 검증하여 모델식의 타당성을 입증하였다.

• Solar Energy
• /
• v.18 no.2
• /
• pp.115-121
• /
• 1998

In this study a channel cavity flow was performed. The channel has small size in the upper cavity region. At the gap is supplied by driven flow for Reynolds number. The experimental study was carried out in a channel cavity with square heat surface by visualization equipment with Mach-Zehnder interferometer and laser apparatus. Heat source was uniform heat flux($0.4W/cm^2,\;0.8W/cm^2,\;1.2W/cm^2$). When the bottom wall is heated, the tendency of natural convection flows are vigorous increasing heat flux.

• Transactions of the Korean Society of Mechanical Engineers B
• /
• v.23 no.3
• /
• pp.408-418
• /
• 1999

Incompressible flow inside a circular cylinder Including periodically oscillating free surface waves was studied primarily by using a numerical method. We developed a finite difference scheme based on the MAC method applicable to three-dimensional free-surface flows, and applied it to the present flow model to study tho flow characteristics as well as the fluid stirring. To verify the validity of our scheme, we performed a simple experiment for flow visualization. We found that the numerical results show a reasonable agreement with the observed flow patterns.