• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.6 no.2
• /
• pp.67-75
• /
• 1986

This paper introduces the nonlinear Stream Function Wave Theory for design waves efficiently to compute the wave energy and energy transport quantities and to analyze the effects of nonlinearities on them. The Stream Function Wave Theory was developed by Dean for case of the observed waves with assymmetric wave profiles and of the design waves with symmetric theoretical wave profiles. Dalrymple later improved the computational procedure by adding two Lagrangian constraints so that more efficient convergence of the iterative numerical method to a specified wave height and to a zero mean free surface displacement resulted. And the Stream Function coefficients are computed numerically by the improved Marquardt algorithm developed for this study. As the result of this study the effects of nonlinearities on the wave quantities of the average potential energy density, the average kinetic energy density result in overestimation by linear wave theory compared to the Stream Function Wave Theory and increase monotonically with decreasing $L^*/L_O$ and with increasing $H/H_B$. The effects of nonlinearities on the group velocity and the wavelength quantities result in underestimation by linear wave theory and increase monotonically with increasing $H/H_B$. Finally the effect of nonlinearity on the average total energy flux results in overestimation for shallow water waves and underestimation for deep water waves by linear wave theory.

• Journal of Nutrition and Health
• /
• v.49 no.5
• /
• pp.313-322
• /
• 2016

Purpose: This study was conducted to examine the relationship among cognitive function, nutrition screening initiative (NSI) score, and food intake status. Methods: A total of 409 subjects aged over 60 years were recruited from the Yongin dementia prevention and control center. Mini Mental State Examination Dementia Screening (MMSE-DS) method was used to assess the cognitive function of the subjects. Information on health related behaviors and food intake was collected by face to face interview using a structured questionnaire. The questionnaires included the NSI DETERMINE checklist, food intake sheets by 24 hr recall method and by semi-quantified food frequency questionnaire. Results: Subjects were divided into low cognitive or normal groups according to the MMSE-DS result. The prevalence of low cognitive function in the subjects was 25.7%. The low cognitive group exercised less and had higher nutritional health risk than the normal group. The low cognitive group had lower consumption of polyunsaturated fatty acid and higher tendency of thiamin, riboflavin, and iron deficiency. The low cognitive group had less frequency of eating mackerel, pepper, tangerine, and watermelon and higher frequency of eating white rice and cookies than the normal group. Conclusion: The results of this study imply that the cognitive function of elderly is related to exercise behavior, nutritional health risk, and food and nutrient intake status.

• Solar Energy
• /
• v.18 no.2
• /
• pp.115-121
• /
• 1998

In this study a channel cavity flow was performed. The channel has small size in the upper cavity region. At the gap is supplied by driven flow for Reynolds number. The experimental study was carried out in a channel cavity with square heat surface by visualization equipment with Mach-Zehnder interferometer and laser apparatus. Heat source was uniform heat flux($0.4W/cm^2,\;0.8W/cm^2,\;1.2W/cm^2$). When the bottom wall is heated, the tendency of natural convection flows are vigorous increasing heat flux.

• Nuclear Engineering and Technology
• /
• v.16 no.1
• /
• pp.1-10
• /
• 1984

General time-volume averaged conservation equations and jump conditions for two-phase flows are derived here. The time-averaged equations for a single phase region in two-phase flow are obtained from local instant balance equations by a technique often used for single phase turbulent flow equations. The results obtained by integrating the time averaged equations over a flow volume are spatially averaged twice; first, they are averaged over a single phase region of the k-th phase and then averaged over the total volume of the k-th phase, in a flow volume. The mass, momentum, and energy conservation equations are obtained from the general time-volume averaged equations. The advantages of the present model are explained by comparing it with Ishii's model (1) and Banerjee's model (2). Finally, the assumptions and approximate terms of the equations of the THERMIT-6S are clarified.

• Journal of Korean Society of Coastal and Ocean Engineers
• /
• v.30 no.6
• /
• pp.270-285
• /
• 2018

The behavior of wave-induced pore water pressure inside the rubble mound and seabed, and the resultant structure failure are investigated, which are used in design of the composite breakwater representing the coastal and harbor structures. Numerical simulation techniques have been widely used to assess these behaviors through linear and nonlinear methods in many researches. While the combination of strongly nonlinear analytical method and turbulence model have not been applied yet, which can simulate these characteristics more accurately. In this study, olaFlow model considering the wave-breaking and turbulent phenomena is applied through VOF and LES methods, which gives more exact solution by using the multiphase flow analytical method. The verification of olaFlow model is demonstrated by comparing the experimental and numerical results for the interactions of regular waves-seabed and regular waves-composite breakwater-seabed. The characteristics of the spatial distributions of horizontal wave pressure, excess-pore-water pressure, mean flow velocity and mean vorticity on the upright caisson, and inside the rubble mound and seabed are discussed, as well as the relation between the mean distribution of vorticity size and mean turbulent kinetic energy. And the stability of composite breakwater are also discussed.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2022.05a
• /
• pp.247-247
• /
• 2022

제트류는 복잡한 흐름 중 하나로 다양한 크기의 에디가 다양한 운동량을 가지고 있다. 이러한 제트류를 구현하기 위해서는 난류 운동 에너지 등 제트류의 특성을 잘 반영하여야 한다. 제트를 구현하기 위해서는 수리학적 모델, 현장 실험 등 많은 방법이 있으며, 본 연구에서는 상대적으로 공간, 시간적 비용이 적게 드는 수치해석 방법을 사용하여 연구를 진행하였다. 대표적인 수치해석방법에는 DNS(Direct Numerical Simulation), LES(Large Eddy Simulation), RANS(Reynolds Averaged Navier Stokes) 등이 있다. RANS는 시간 평균 흐름 특성만 산출하며 제트의 복잡성을 재현하는 데 한계가 있어, 본 연구는 DNS와 LES 모델을 이용하여 제트류를 구현하는 것에 초점을 맞추었다. DNS는 해당 격자에서 발생하는 모든 에디를 직접 해석 때문에 난류 모델링이 필요하지 않지만, 많은 수의 그리드가 필요하여 수치해석 시 소요시간이 긴 편이다. LES는 대규모 에디는 직접 해석하지만 일정 크기 이하의 소용돌이를 해석하기 위해서 모델이 필요하다. 따라서 서브 그리드 모델에 따라 약간 다른 결과를 보인다. 이러한 문제점을 해결하기 위해 본 연구에서는 LES의 기존 서브 그리드 모델을 사용하지 않고 신경망 모델로 학습한 DNS 결과를 활용하는 방법을 제안한다. 우선 DNS와 LES 모델을 사용하여 에너지 스펙트럼을 비교하여 서브 그리드 모델이 시작하는 파수를 찾는다. 이후 특정 파수 아래의 작은 에디를 모사할 적절한 신경망 모델을 결정하여 DNS의 작은 에디를 신경망 알고리즘이 모사할 수 있도록 학습시킨다. 이후 기존 서브 그리드 모델을 사용하지 않고 학습된 신경망 알고리즘을 사용한 LES 모델이 모사한 제트류와 실제 DNS 모델을 사용한 제트류를 비교 및 평가한다.

• Journal of Korean Society of Coastal and Ocean Engineers
• /
• v.28 no.2
• /
• pp.73-80
• /
• 2016

To reduce the mechanical energy loss and to get the high energy efficiency, an apparatus of wave power generation inducing a consistent one way rotating motion from the wave reciprocation motions was developed and the hydraulic experiments for the real electric power production were conducted and the results were discussed. In the experiments for the shape of the buoyant tank, the efficiency of the fixed 9 cm diameter type enduring the wave plate weight was 14.6% and this was the best result for all shapes. But although the free sliding type was expected to represent a high efficiency, the experiments did not show a good result as 8.5% efficiency. Therefore, the shape of buoyant tank was decided as the fixed 9 cm diameter type in the next all tests. In the experiments for the various incident waves, when the water depth was 90 cm, the average efficiencies were measured as 3.9% in the 2nd gear, 4.9% in the 3rd gear, 4.9% in the 4th gear, 12.0% in the 5th gear, 10.0% in the 6th gear, 3.1% in the 7th gear, and 3.0% in the 8th gear. Also, when the water depth was 80 cm, the average efficiency was shown as 15.0% with 5th gear condition. Therefore the high average efficiency as 13.5% was given with 80~90 cm water depth and the 5th gear in the model.

• Journal of Korean Society of Coastal and Ocean Engineers
• /
• v.32 no.6
• /
• pp.531-552
• /
• 2020

In the previous study, both the wave characteristics at the tip of composite breakwater and on caisson were investigated by applying olaFlow numerical model of three-dimensional regular waves. In this paper, the same numerical model and layout/shape of composite breakwater as applied the previous study under the action of one directional irregular waves were used to analyze two and three-dimensional spatial change of wave force including the impulsive breaking wave pressure applied to trunk of breakwater, the effect of rear region, and the occurrence of diffracted waves at the tip of caisson located on the high crested rubble mound. In addition, the frequency spectrum, mean significant wave height, mean horizontal velocity, and mean turbulent kinetic energy through the numerical analysis were studied. In conclusion, the larger wave pressure occurs at the front wall of caisson around the still water level than the original design conditions when it generates the shock-crushing wave pressure in three-dimensional analysis condition. Which was not occurred by two-dimensional analysis. Furthermore, it was confirmed that the wave pressure distribution at the caisson changes along the length of breakwater when the same significant incident wave was applied to the caisson. Although there is difference in magnitude, but its variation shows the similar tendency with the case of previous study.

• Proceedings of the Korean Society of Tribologists and Lubrication Engineers Conference
• /
• 1992.11a
• /
• pp.50-56
• /
• 1992

공업재료의 표면은 수많은 돌기들로 구성되어 있으며 이러한 돌기들의 접촉으로 진실접촉이 이루어진다. 그러므로 마찰은 겉보기 접촉면적과는 무관하며 진실접촉면에서 일어난다. 표면의 한 돌기가 접촉면과 상대운동을 함으로 인하여 마찰열이 발생된다. 이러한 마찰에너지 발산의 결과로서 진실접촉면적 주위의 국부적인 표면 온도가 상승되며 따라서 표면의 평균온도가 상승된다. 이러한 표면온도를 결정하기 위한 이론적 및 실험적인 방법이 많이 제시되어왔다. 정적상태에서의 표면온도는 Block(1937)과 Jaeger(1942)에 의해 이론적으로 소개하였다. Jaeger는 열원의 위치와 상대적인 접촉운동 그리고 크기 및 경계조건 등의 특정한 조건 하에서 진실접촉점의 온도를 계산하였다. 이에 Bany와 Baber(1984)는 그들의 경계조건이 잘목 정의되었음을 지적하고 더욱 세분화된 경계조건으로 온도분포를 유도한 바 있다. Ling(1969)은 접촉점에서의 온도가 주변의 겉보기 접촉면적의 온도보다 훨씬 높다는 것을 수치해석으로 밝혀냈다. 본 연구는 고속정밀촬영기를 이용하여 진실접촉점에서 발생하는 Hot spot의 온도분포를 실험을 통하여 규명하고 그 결과를 Geoim과 Winer의 이론식에 적용하므로 식의 유용성을 검증하는데 그 목적이 있다.

• The Magazine of the Society of Air-Conditioning and Refrigerating Engineers of Korea
• /
• v.13 no.3
• /
• pp.141-147
• /
• 1984

2차원 채널 입구에서의 꿰떼 난류 유동하는 찬 물 위를, 같은 방향으로 빠르게 난류 유동하는 수증기의 응축은 액체필름 초기상태의 과냉 정도에 의하여서 응축능력이 정하여진다. 수증기와 액체의 채널 입구에서의 균일한 속도 및 온도, 그리고 채널 입구에서 액체와 증기가 차지하는 체적비, 즉 액체필름과 채널 높이를 알고 있을 때, 하류로 유동하면서 응축이 일어나는 현상을 예측하는 모델을 제안하고, 실험치와 비교한 것이다. 채널 입구에서 윗쪽으로는 더운 기체, 아래쪽으로는 찬 액체가 평행한 방향으로 유동하면서 접촉하고 평균적인 액체필름의 두께와 단열된 채널 벽체를 가정하여서, 기본방정식으로 연속방정식, 운동방정식을 세우고. 에너지와 운동량 전달 메카니즘 사이에 유사성이 존재한다고 가정하였으며, 전단응력의 크기는 필자의 모델을 적용하였다. 기본방정식을 기체 속도, 액체 속도, 필름의 두께, 압력에 대해서 수치해를 구하여서 동일조건 하에서 실험한 데이터와 비교하였다. 수증기와 액체 경계면에서의 전단응력은 매우 좋은 일치를 보여주고 있다.