• Journal of Korean Society of Coastal and Ocean Engineers
• /
• v.22 no.3
• /
• pp.181-190
• /
• 2010

In case of constructing submerged breakwaters, the circulation current is occurred around the open inlet because of mean water level difference between front and rear sides of them. The aim of this study is to investigate the flow control structure of new-type submerged breakwater which is able to reduce mean water level at rear side of it. At first, the numerical model (LES-WASS-3D) is validated by comparing with existing experimental data. And then, numerical simulation is carried out to examine wave height, mean water level and mean flow around the newtype submerged breakwater. From the numerical results, it can be pointed out that the new-type submerged breakwater with drainage system reduces the rip current around the open inlet.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.28 no.1B
• /
• pp.115-123
• /
• 2008

In the present study, a three dimensional hydrodynamic characteristics around the fully submerged dual breakwaters with a sand beach has been investigated numerically using a 3-D numerical scheme, which can determine the eddy viscosity with LES turbulence model and is able to consider wave-structure-seabed interaction in 3-dimensional wave field (LES-WASS-3D), recently developed by Hur and Lee (2007). Based on the numerical experiments, strong vortices can be generated fore and aft edges of the structures, and propagate lee sides. Thus relatively large circulation flows are occurred around submerged breakwaters. The 3-D flow hydrodynamic characteristics have been examined by mean flows and mean vortices for various x-y, x-z sections and y-z layers. Wave height distribution and wave set-up around and over submerged breakwaters, and breaking point migration toward shore side is discussed in detail.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2023.05a
• /
• pp.130-130
• /
• 2023

제트류는 다양한 크기와 운동량의 에디가 복잡하게 혼합되어 이루어져 있으며, 이를 정확하게 모델링하고 이해하기 위해서는 제트류의 다양한 특성들을 잘 반영하여 연구를 수행해야 한다. 다양한 연구 수행 방법 중 수치해석 방법은 상대적으로 공간 및 시간적 비용이 적게 들어서 널리 사용되고 있다. 이러한 수치해석 방법에는 DNS(Direct Numerical Simulation), LES(Large Eddy Simulation), RANS(Reynolds Averaged Navier Stokes) 등이 있으며, 그중 LES는 난류 모델링을 사용하는 RANS 방법에 비해 더욱 정확한 흐름 모델링을 제공하는 장점이 있다. 이러한 LES는 대규모 에디는 직접 해석하면서, 일정 크기 이하의 에디는 모델링을 사용해 해석하는 것이 특징이다. 하지만, LES를 사용하기 위해서는 적절한 그리드 크기를 결정하는 것이 중요하며, 이는 모델의 정확성과 연산 비용에 큰 영향을 미친다. 하지만, 여전히 적절한 그리드 크기를 결정하는 것은 어려운 문제이다. 이러한 LES 모델링을 사용할 때 적절한 그리드 크기를 결정하기 위해서는 정확한 시간 평균 속도 변동을 연구하는 것이 앞서 선행되어야 한다. 따라서, 본 연구에서는 기계학습 기반 접근 방식을 사용하여 난류 제트 내 시간 평균 속도 변동을 예측하는 연구를 진행하였다. 즉, 난류 제트 역학을 이해하는 데 중요한 파라미터인 시간 평균 유속을 이용하여 시간 평균 속도 변동을 예측하는 데 초점을 맞추었다. 모델의 성능은 평균 제곱 오차와 R-제곱 등 다양한 지표를 사용하여 평가되었다.

• Journal of Radiation Protection and Research
• /
• v.32 no.3
• /
• pp.123-133
• /
• 2007

Z-axis automatic tube current modulation technique automatically adjusts tube current based on size of body region scanned. The purpose of the current study was to compare noise, and radiation dose of multi-detector row CT (MDCT) of lower extremity performed with Z-axis modulation technique of automatic tube current modulation with manual selection fixed tube current. Fifty consecutive underwent MDCT venography of lower extremity with use of a MDCT scanner fixed tube current and Z-axis automatic tube current modulation technique (10, 11 and 12 HU noise index, $70{\sim}450\;mA$). Scanning parameters included 120 kVp, 0.5 second gantry rotation time, 1.35:1 beam pitch, and 1 mm reconstructed section thickness. For each subject, images obtained with Z-axis modulation were compared with previous images obtained with fixed tube current (200, 250, 300 mA) and with other parameters identical. Images were compared for noise at five levels: iliac, femoral, popliteal, tibial, and peroneal vein of lower extremity. Tube current and gantry rotation time used for acquisitions at these levels were recorded. All CT examinations of study and control groups were diagnostically acceptable, though objective noise was significantly more with Z-axis automatic tube current modulation. Compared with fixed tube current, 2-axis modulation resulted in reduction of CTDIvol (range, $-6.5%{\sim}-35.6%$) and DLP (range, $-0.2%{\sim}-20.2%$). Compared with manually selected fixed tube current, 2-axis automatic tube current modulation resulted in reduced radiation dose at MDCT of lower extremity venography.

• Korean Journal of Food Science and Technology
• /
• v.14 no.4
• /
• pp.375-381
• /
• 1982

The studies are conducted on the changes of soybean lipids in terms of physicochemical characteristics, lipid classess and fatty acid composition during the fermentation process of soybean Koji preparation for daenjang (soybean paste) in a model system using cooked soybean inoculated by Aspergillus oryzae. The total lipids contents were increased during soybean Koji preparation, generally iodine values decreased but acid values increased. Total lipids of soybean Koji consisted of about 90.6% neutral lipids, 7.6% phospholipids and 1.8%, glycolipids indicating that phospholipids contents of soybean Koji was increased when compared to those of cooked soybean. The major components of nonpolar lipids in soybean Koji were free fatty acids(39.6%) and triglycerids(29.2%). Free fatty acids increased as the triglycerides decreased during soybean Koji preparation by the hydrolysis of lipase action. The major components of polar lipids in soybean Koji were phosphatidyl choline and phosphatidyl ethanolamine. Differences were observed in the composition of the polar lipids of cooked soybean and soybean Koji. A little changes also occurred in fatty acid compositions of total lipids, triglycerides and free fatty acids fractions in soybean Koji preparation. Especially a considerable increase of linoleic acid in free fatty acid fraction was observed in soybean Koji.

• Journal of Chest Surgery
• /
• v.34 no.8
• /
• pp.611-614
• /
• 2001

To determine the efficacy and safety of endoscopic resection and ablation of superficial varicosities using a powered vein resector, irrigated illuminator. Material and Method: 83 consecutive patients were involved in the study. 103 limbs in 83 patients were treated using a minimal invasive, powered, vein resecting devide with cutaneous transillumination and tumescent anesthesia technique. There were 51 women and 32 men. All patients were operated under general anesthesia or regional anesthesia. Operative time and patient satisfaction scores were recorded along with the number of incisions made. Result: 83 patients(51/61.4% female, 32/38.6% male, aged 25-78 years) had varicose vein. Average age at the time of operation was 45 years(range, 25 to 78 years). There were 63 unilateral procedures and 20 bilateral operations. Operative time ranged from 24 to 46 minutes (average 35.3 minutes) in the unilateral procedure. The number of incisions per limb averaged 2.7(range, 2 to 5). Postoperative complications occurred in 7(8.4%) patients. Patients were asked to describe their pain on an analog scale ranging form 1 to 10 with r representing no pain and 10 worst imaginable pain. Immediately postoperative pain score was 2.4 Postoperative pain score at 72 hours had a mean score of 2.0. Postoperative pain score at 1 months were 1. Conclusion: Varicose vein removal using Transilluminated Powered Phlebectomy(TIPP) is a safe and efficient procedure. The procedure saves time, is easy to perform, and gives direct visualization and a distinct endpoint of the removal of veins. It is also less tedious to perform and gives good cosmetic results with significant pain relief.

• Economic and Environmental Geology
• /
• v.19 no.3
• /
• pp.231-237
• /
• 1986

Samples of porphyries, andesites, decites and sandstones were collected from 14 sites in order to study paleomagnetism and to determine K-Ar age in Guryongpo area. K-Ar age dating indicates that porphyries and volcanic rocks formed 41.7 and 22.7~19.4Ma, respectively. The mean direction of remanent magnetization for each site was generally well grouped after alternating field demagnetization. Both normal and reversed directions are present. The mean magnetic direction of the porphyries of Late Eocene and that of the volcanic rocks of Late Oligocene to Early Miocene have similar, easterly declinations. Overall magnetic direction is $Dm=43.8^{\circ}$, $Im=53.5^{\circ}$, ${\alpha}95=12.2^{\circ}$. the reliability of the observed paleomagnetic directions is ascertained by the presence of normal and reversed polarities. This is also conformed by the similarity of the declinations of the normal and reversed polarities. Observed easterly declinations in this area are attributed to local clockwise rotation of the land mass by approximately 40~50 degrees since early Miocene.

• Journal of the Korean Society for Nondestructive Testing
• /
• v.20 no.6
• /
• pp.555-561
• /
• 2000

The remote field eddy current (RFEC) inspection was performed on the ductile cast iron pipes with nominal outer diameter of 100mm, which were machined with various shapes and sizes of defects. Ductile cast iron pipes which are used as water supply pipe have the non-uniform thickness and asymmetric cross section due to relatively high degree of allowable errors during the manufacturing processes. These characteristics of ductile cast in pipes cause the long range background noises in RFEC signals along the pipe. In this study, tile machined defects in pipes were effectively classified by the moving window average (MWA) method which eliminated the long-range noise. The voltage plane polar plots (VPPP) method was used to quantitatively evaluate the depth and circumferential degree of defects. The VPPP signatures showed that the angle between defect signature and the normalized in-phase component on the VPPP is linear to the depth of defects. The nondestructive RFEC technique proved to be capable of quantitatively evaluating the machined defects of underground water supply pipe.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2009.05a
• /
• pp.555-559
• /
• 2009

난류응력은 순간속도성분을 시간평균성분과 편차성분의 합으로 보고 Navier-Stokes 방정식으로부터 Reynolds 방정식을 유도할 때 나타나게 된다. Reynolds 방정식으로부터 수심 적분된 천수방정식을 유도하는 과정에서 시간 평균된 유속성분을 수심 적분된 유속성분과 편차성분의 합으로 본다면, 분산응력 (dispersion stress)이라고 하는 추가적인 새로운 항이 잔류하게 된다. 점성응력, 난류응력, 그리고 분산응력을 통칭하여 유효응력 (effective stress)이라고 한다. 일반적으로 수심에 비해 수로 폭이 넓은 개수로에서는 유효응력이 흐름특성의 수치 근사해에 큰 영향을 미치지 못한다고 가정하여 2차원 수심적분 모형에서 유효응력을 생략하기도 한다. 또한 유효응력을 적용하더라도, 점성응력이 난류응력에 비해 무시할 만큼 작다고 가정하여 난류응력만을 적용하며, 분산응력은 무시된다. 하지만 만곡부에서는 원심력과 편수위로 인한 횡방향 압력의 불균형이 발생하기 때문에, 만곡부의 이차류가 발생되며, 유속의 연직방향 분포도 일정하지 않게 된다. 따라서 본 연구의 목적은 만곡부의 이차류 특성을 수심적분 2차원 모형에 반영하기 위해 분산응력을 고려한 모형의 개발 및 검증이다. 불규칙한 모의영역을 원활히 나타낼 수 있도록 곡선좌표계를 사용하는 여타 모형들과 달리 유한유소법을 이용하여 수치해를 구하며, 따라서 x, y 좌표축을 사용하는 데카르트 좌표계를 사용하여 지배방정식을 나타낸다. 분산응력의 유 무에 따른 수치결과를 Rozovskii의 $180^{\circ}$ 만곡수로 실내실험 자료와 비교하여 개발 모형을 검증한다.

• The Journal of the Korea Contents Association
• /
• v.15 no.4
• /
• pp.510-518
• /
• 2015

Weather condition has effect on traffic condition, but there is a lack of research between weather and traffic condition. So, in this study analyzes speed variation according to rainfall intensity in national highway provincial road. The results of the analysis, average speed is reduced about 3.2%. But average speed decrease by maximum 8.8% when traffic volume is below 200vph per direction. Because relatively, free flow traffic speed has greatly deceased according to rainfall intensity in provincial road. Also in this study estimates of speed reduction model according to rainfall and performs the statistical verification. Estimated speed reduction model's slops are gradual when rainfall increased, because average speed is reduced by rainfall when free flow.