• Progress in Medical Physics
• /
• v.19 no.4
• /
• pp.263-268
• /
• 2008

The application of a respiratory gated radiotherpy method to the lung radiation surgery was evaluated compared with the conventional method in which the whole tumor motion range is considered in the delineation of PTV (Planning target volume). The four dimensional CT simulation images were acquired for the five NSCLC (Non-small cell lung cancer) patients for radiation surgery. The respiratory gated plan was prepared with the 50% phase CT images and the conventional method was planned based on the ITV (Internal target volume) which include all the target volumes created in each phase CT images within a whole respiratory period. The DVH (Dose volume histogram) of OAR (Organ at risk) which calculated in each method was compared for the evaluation of the plan properness. The relative decrease of OARs' DVH were verified in the application of respiratory gated method. The average decrease rate were $16.88{\pm}9.97%$ in the bronchus, $34.13{\pm}19.15%$ in the spinal cord, $28.42{\pm}18.49%$ in the chest wall and $32.48{\pm}16.66%$ in the lung. Based on these results, we can verified the applicability and the effectiveness of the respiratory gated method in the lung radiation surgery.

• Economic and Environmental Geology
• /
• v.39 no.6 s.181
• /
• pp.699-710
• /
• 2006

Batch scale experiments to investigate the efficiency of the solidification process for metal mine tailing treatment were performed. Portland and MSG (micro silica pouting) cements were used as solidifier and three kinds of mine tailings (located at Gishi, Daeryang, and Aujeon mine) were mixed with cements to paste solidified matrices. Single axis com-pressible strengths of solidified matrices were measured and their heavy metal extraction ratios were calculated to investigate the solidification efficiency of solidified matrices created in experiments. Solidified matrices ($5cm{\times}5cm{\times}5cm$) were molded from the paste of tailing and cements at various conditions such as different tailing/cement ratio, cement/water ratio, and different cement or tailing types. Compressible strengths of solidified matrices after 7, 14, and 28 day cementation were measured and their strengths ranged from 1 to $2kgf/mm^2$, which were higher than Korean limit of compressible strength for the inside wall of the isolated landfill facility ($0.21kgf/mm^2$). Heavy metal extractions from intact tailings and powdered matrices by using the weak acidic solution were performed. As concentration of extraction solution for the powdered solidified matrix (Portland cement + Gishi tailing at 1:1 w.t. ratio) decreased down to 9.7 mg/L, which was one fifth of As extraction concentration for intact Gishi tailings. Pb extraction concentration of the solidified matrix also decreased to lower than one fourth of intact tailing extraction concentration. Heavy metal extraction batch experiments by using various pH conditions of solution were also performed to investigate the solidification efficiency reducing heavy metal extraction rate from the solidified matrix. With pH 1 and 13 of solution, Zn and Pb concentration of solution were over the groundwater tolerance limit, but at pH $1{\sim}13$ of solution, heavy metal concentrations dramatically decreased and were lower than the groundwater tolerance limit. While the solidified matrix was immerged Into very acidic or basic solution (pH 1 and 13), pH of solution changed to $9{\sim}10$ because of the buffering effect of the matrix. It was suggested that the continuous extraction of heavy metals from the solidified matrix is limited even in the extremely high or low pH of contact water. Results of experiments suggested that the solidification process by using Portland and MSG cements has a great possibility to treat heavy metal contaminated mine tailing.

• Journal of Nuclear Fuel Cycle and Waste Technology(JNFCWT)
• /
• v.9 no.3
• /
• pp.131-139
• /
• 2011

This study was carried out to examine the stability of $Na_2CO_3-H_2O_2$ carbonate solution with aging time in the dissolving solution after oxidative dissolution of U by a carbonate solution, the Cs/Re filtrate after selective precipitation of Cs and Re (as a surrogate for Tc), and the acidification filtrate after precipitation of U by acidification, respectively. The compositions of dissolving solution were not changed with ageing time, and the selective precipitation of Re and Cs was also not affected without regard to the aging time of dissolving solution. The successive removal of Cs and Re from a carbonate dissolving solution was possible. However, the recovery yield of U by acidification was decreased with increasing the aging time of the dissolving solution and the Cs/Re-filtrate, respectively, because U was converted from the uranyl peroxocarbonato complex to the uranyltricarbonate in the solution aged for a long time. Accordingly, it is effective that a dissolving solution and a Cs/Re filtrate are treated within the aging of 7 days, respectively, in order to recover U more than 99%. On the other hand, the recovery of U was carried out in order of the oxidative dissolution of U selective precipitation of Re and Cs precipitation of U by acidification. Almost all of U and a part of FP were co-dissolved in oxidative dissolution step. Over 99% of Re and Cs from the FP co-dissolved with U could be removed by a TPPCl (tetraphenylphosphonium chloride) and a NaTPB (sodium tetraphenylborate), respectively. U was precipitated nearly 100% by acidification to pH 4. Therefore, it was confirmed that the validity of recovery of U by precipitation methods from a SF (spent fuel) in the $Na_2CO_3-H_2O_2$ solution.

• Journal of the Korean Society of Food Culture
• /
• v.14 no.4
• /
• pp.289-304
• /
• 1999

The purpose of this study was to examine the consumers' acceptance of irradiated foods according to sociodemographic characteristics and the factors to distinguish subjects with differential levels of their willingness to buy them. Data were collected from the 365 women living in Youngnam area by the self-administered questionnaire. The results from this study were as follows. First, consumers were concerned regarding food safety issues in general and particularly preservatives. Second, many subjects had not heard of the irradiated foods and showed wait-and-see attitude in the willingness to accept them. Consumers' willingness to purchase them were higher than any other cases if radiation would not remain in foods. Third, the results from the discriminant analyses showed that the concern toward food safety, perceived innovativeness, willingness to pay more for organic foods, and knowledge of irradiation were the factors to distinguish groups with differential levels of willingness to purchase the irradiated foods. The results from the study imply that accurate and scientific information about food irradiation should be given to the consumers.

• Journal of the Korea Organic Resources Recycling Association
• /
• v.11 no.3
• /
• pp.87-95
• /
• 2003

Although extensive studies were conduced on hydrogen fermentation of organic wastewaters, little is known about biohydrogen production from organic solid wastes. The leaching-bed reactor treating food waste by heat-shocked anaerobic sludge was, therefore, operated at D of 2.1, 3.6, 4.5 and $5.5d^{-1}$ to find optimal D for hydrogen production. Successful operation of a reactor can be accomplished when it is operated at proper dilution rate (D). Operation at high D leads to the washout of biomass in the reactor while operation at low D leads to product inhibition due to the accumulation of excess VFA. These appear to limit the production of hydrogen to reach a higher level. All the reactors showed that, on day 1-3, hydrogen production was dominant and VFA concentration was higher than ethanol. Butyrate and acetate were major components of VFAs over the whole operation, though lactate was very high on day 1-2. Compared with other D values, D of $4.5d^{-1}$, resulted in higher butyrate/acetae (B/A) ratios during the fermentation. The trend of B/A ratios was similar to the hydrogen production, suggesting that butyrate formation favored hydrogen production. Ethanol increased significantly from day 4 when hydrogen Production stopped. It indicated that heat-shocked sludge was able to induce a metabolic flow from hydrogen-and acid-producing pathway to solvent-producing pathway. Operation at D of $4.5d^{-1}$ led to higher fermentation efficiency (58%) than those (51.5, 55.3 and 53.7%) at 2.1, 3.6 and $5.5d^{-1}$. The COD removed was convened to hydrogen (10.1%), VFA (30.9%), and ethanol (17.0%).

• Progress in Medical Physics
• /
• v.18 no.1
• /
• pp.27-34
• /
• 2007

Respiration sating radiotherapy technique developed In consideration of the movement of body surface and Internal organs during respiration, is categorized into the method of analyzing the respiratory volume for data processing and that of keeping track of fiducial landmark or dermatologic markers based on radiography. However, since these methods require high-priced equipments for treatment and are used for the specific radiotherapy. Therefore, we should develop new essential method whilst ruling out the possible problems. This study alms to obtain body surface motion by using the couch based computer-controlled motion phantom (CBMP) and US sensor, and to develop respiration gating techniques that can adjust patients' beds by using opposite values of the data obtained. The CBMP made to measure body surface motion is composed of a BS II microprocessor, sensor, host computer and stopping motor etc. And the program to control and operate It was developed. After the CBMP was adjusted by entering random movement data, and the phantom movements were acquired using the sensors, the two data were compared and analyzed. And then, after the movements by respiration were acquired by using a rabbit, the real-time respiration gating techniques were drawn by operating the phantom with the opposite values of the data. The result of analysing the acquisition-correction delay time for the data value shows that the data value coincided within 1% and that the acquistition-correction delay time was obtained real-time $(2.34{\times}10^{-4}sec)$. And the movement was the maximum movement was 6 mm In Z direction, In which the respiratory cycle was 2.9 seconds. This study successfully confirms the clinical application possibility of respiration gating techniques by using a CBWP and sensor.

• The Journal of Korean society of community based occupational therapy
• /
• v.1 no.1
• /
• pp.79-89
• /
• 2011

The number of the disabled person had been increased for the industrial accident and the environmental pollution. Especially, developmental disability has the high prevalence rate between 5% and 10% of the whole children. The children with a developmental disability can be treated by the physical therapy, the occupational therapy, the psychology therapy, speech therapy, and art therapy. Visual preception which is function to recognize the external environment through the optic organ could be related to most behaviors on the everyday life. But because the children with disability could not develop the visual-preception enough, they came to have difficulties in executing daily life project. For this reason, it is most important to understand the estimation and the cure on the visual-preception in the pediatric occupational therapy. To improve the visual-preception power, we have many kind of methods including sensory integration, training program for the visual-perception and art-craft program. Particularly, the art-craft which is the representative activity for making something by hands, can be applied to anyone. As the study on the brain has been activated, it was proved that handicraft actives could have an good effect on the brain function and using brain. When the fine motor exercise and more delicate and accurate motion were carried, these motions need the essential help of the visual-perception. So it could be expected that using the repetitive hand function by art-craft makes the brain function improve, when a activity that needs a fine motor exercise and more delicate, accurate motion was carried, It also indicates that the art-craft program has a clear treatment value. Though the intervention between visual-perception development and visual-perception disability have a majority in the field of occupational therapy, there is a few study yet. Therefore, this study tried to look back on the necessity of applying the art-craft program to the children with disability as the prestudy for preliminary validity of the master's thesis.

• Journal of the Korean Society of Food Science and Nutrition
• /
• v.39 no.4
• /
• pp.613-623
• /
• 2010

The purpose of this study was to examine parents' perceptions towards the importance and performance levels of foodservices quality at kindergartens. The questionnaire was developed to measure the thirty-one quality attributes of foodservice operations. A questionnaire survey was conducted to 500 parents and the return rates were 62.4%. The survey period was from July 15 to August 8, 2008. The parents had a high level of perception toward the need for foodservice, earning 4.46 points out of 5 point. Their perceptions of foodservice quality were examined by six dimensions of importance and performance level. While the parents gave 4 points or greater of 5 points to most quality attributes of importance level, they gave 4 points or less out of 5 points to most quality attributes of performance level. As for the importance and performance level of the quality dimensions of foodservice, parents regarded sanitation as the most important dimension. IPA showed that 'ventilation', 'sanitation of tableware' and 'sanitation of dining tables and chairs' were included as 'focus' areas. The overall satisfaction level for foodservice was 3.74 out of 5 points A higher level of satisfaction was shown at self-operated foodservice system of kindergartens. According to multiple regression analysis, 46.3% of the variance in the respondents' overall satisfaction scores was explained by factors such as food, menu and price, facilities, sanitation, atmosphere and foodservice effects.

• Journal of Technology Innovation
• /
• v.25 no.2
• /
• pp.153-179
• /
• 2017

Korean government has granted fixed indirect cost rates to several exceptional R&D programs which is lower than the predetermined rate by the government. It has been needed to evaluate the validity of exceptional R&D programs and determine the optimal indirect costs rate of the programs. This study analyzes the cost structure and explores drivers of indirect costs of exceptional R&D programs and evaluates the validity of current indirect costs rates. Finally, we propose the formulas for indirect costs rates of exceptional R&D programs. We analyze the cost structure of the exceptional R&D programs. Equipments and material costs are 50% in infra building program. Scholarship to students is 43% in HRD program. Equipments and material costs are 50% and R&D activity costs are 31% in international R&D program. Main cost components of evaluation program are salary(37%), R&D execution costs(21%) and R&D activity costs(19%). We propose three formulas of indirect costs for exceptional programs. 1) The cost items with exceptionally large amount are excluded in the base of formula for indirect costs. 2) Fixed indirect cost rate is applied for specific R&D programs. 3) Upper bound is set for the cost items with exceptionally large amount in the calculation of indirect costs rate. Our proposal is expected to contribute to the improvement of the efficiency of national R&D programs.

• Journal of Korean Home Economics Education Association
• /
• v.32 no.3
• /
• pp.27-48
• /
• 2020

The purpose of this study is to develop a theme-selection activity in 'clothing life' in relation to SDGs(Sustainable Development Goals) for the free semester program. After analyzing the contents of the 'clothing life' area of middle school home economics textbooks based on the SDGs, the content system and learning goals were set. Then a program was developed and the validity and the feasibility of the program were verified. As a result of the analysis of textbooks, the contents of 'clothing life' included all the three basic dimensions of social development, economic growth, and environment protection, yet focus only on 1 or 2 goals of each area. Based on the results of the analysis, a 'Righteous(義) Clothing(衣) Life' program was developed. The developed program consists of teaching-learning process plans and teaching-learning materials in eight class periods, including 'The future everyone dreams of' based on SDG12, 'Two faces of fast fashion' based on SDG1, SDG5, SDG8, SDG10, 'Living as Homoclimatus' based on SDG13, and 'The future we create' based on SDG9 and SDG12. Through the expert evaluation process for the developed program, the program's teaching and learning adequacy and feasibility were reviewed and feedback was actively reflected to correct and supplement the program. Through this study, it is expected that it will contribute to laying the foundation for establishing home economics as a subject that educates citizens who practice sustainable life, and a pivotal subject in education for sustainable development.