• Title/Summary/Keyword: 편광분리기

Search Result 37, Processing Time 0.023 seconds

두 개의 모드가 간섭하는 광도파로를 이용한 편광 분리기의 제작

  • 한기관
    • Proceedings of the Optical Society of Korea Conference
    • /
    • 1989.02a
    • /
    • pp.123-126
    • /
    • 1989
  • 두 개의 모드가 간섭하는 LiNbO3 광도파로를 이용하여 기존의 편광 분리기와는 달리 두 개의 전극에 의해 두 편광의 출력을 임의로 조절할 수 있는 편광 분리기를 제작하였으며, 두 전극에 각각 52V, 72V를 걸어주어 20dB 이상의 분리도를 얻을 수 있다.

  • PDF

Polarization Splitter Made of the Side-Polished Fiber Coupler Including a thin Metal Intermediate Layer (얇은 중간 금속층을 포함한 측면 연마 광섬유 결합기를 이용한 편광 분리기)

  • 김광택;이준옥
    • Journal of the Institute of Electronics Engineers of Korea SD
    • /
    • v.40 no.9
    • /
    • pp.651-657
    • /
    • 2003
  • We have demonstrated an in-line polarization splitter based on a side-polished fiber coupler including a thin metal intermediate layer. The experimental results revealed that the metal layer with proper thickness prevents TE polarization component from optical coupling between two contacted side-polished fibers, whereas it allows TM polarization component to the coupling. The design and fabrication techniques about the polarization splitter exploiting the side-polished fibers have been presented. The fabricated polarization splitter exhibited 18dB and 23dB of isolation ratio for TE polarization and TM polarization, respectively. The measured insertion loss for TE and TM polarization was 0.7dB and 1.3dB, respectively.

Polarization beam splitter made of side-polished polarization maintaining fiber coupler including a thin metal layer (얇은 금속층을 포함한 측면 연마 편광 유지 광섬유 결합기를 이용한 편광 분리기)

  • 문정원;윤대성;김효겸;김철호;김광택
    • Proceedings of the Optical Society of Korea Conference
    • /
    • 2003.07a
    • /
    • pp.18-19
    • /
    • 2003
  • 측면 연마 광섬유 결합기는 비록 제작 공정이 다소 복잡하지만 다양한 응용이 가능하기 때문에 많은 연구가 진행 되어 왔다. 특히 최근에는 광센서나 초고속 광통신망에 편광 유지 광섬유를 이용한 광학소자의 필요성이 증가 하고 있다. 본 논문은 얇은 중간 금속 층을 가지는 측면 연마 편광 유지 광섬유 결합기를 이용한 편광 분리기에 관한 실험 연구 결과를 보고한다. (중략)

  • PDF

Design of polarization beam splitter using MacNeille prism for broadband visible and large incident angle (맥닐 프리즘을 이용한 넓은 가시광 영역, 큰 각 입사 편광광속분리 프리즘의 설계)

  • 박범호;이장훈;황보창권;문일춘;강건모
    • Proceedings of the Optical Society of Korea Conference
    • /
    • 2000.08a
    • /
    • pp.174-175
    • /
    • 2000
  • 1946년 S M MacNeille에 의해 연구된 유전체 다층 박막을 이용한 편광광속분리기는 브르스터 각 편광광속분리기(Brewster angle polarizing beam splitter) 혹은 맥닐 프리즘(MacNeille prism)으로 알려져 있으며 지금도 많은 광학계에서 사용되고 있다. 맥닐 프리즘은 두 개의 프리즘 사이의 빗면에 높은 굴절률( $n_{H}$ )을 갖는 물질과 낮은 굴절률( $n_{L}$ )을 갖는 물질을 λ/4 광학두께로 교번으로 한 고반사 다층박막 구조를 갖는다. 각 층의 경계면에서 브르스터 각으로 입사할 경우 p-편광파는 투과하고 s-편광파는 부분적으로 반사한다. 편광광속분리 정도는 p-편광파와 s-편광파의 투과율( $T_{p}$, $T_{s}$ ) 혹은 반사율( $R_{p}$, $R_{s}$ )의 비로 나타내며 이를 소광비(extinction ratio)라 한다. (중략)(중략)략)

  • PDF

Implementation of Plasmonic Polarization Beam Splitter based on an Asymmetric Grating Profile (비대칭 격자구조에 기초한 플라즈마 편광 빔 분리기의 구현)

  • Kwang-Chun Ho
    • The Journal of the Institute of Internet, Broadcasting and Communication
    • /
    • v.24 no.2
    • /
    • pp.155-160
    • /
    • 2024
  • The polarization-selective beam splitter grating can be widely used in numerous optical information processing systems. In this paper, to design a high-efficiency plasma polarization beam splitter (PBS), the structure composed of an Ag metal layer in Littrow mounting is implemented. To achieve high diffraction efficiency in the transmitted 0th-order TE polarization and the reflected 0th-order TM polarization, the grating depth and grating ratio of presented PBS is optimized by using rigorous Modal Transmission-Line Theory. From the optimized results, PBS has advantages of wide band properties for incident wavelength and angle, and the efficiency is higher than 95% for both TE and TM polarization. Therefore, this highly efficient PBS wideband grating with high extinction ratio can be used as an excellent optical diffraction device.

Polarization splitting characteristics of the side-polished fiber coupler with a thin metal interlayer (금속층이 포함된 측면 연마 광섬유 결합기의 편광 분리 특성)

  • 김광택;황보승
    • Korean Journal of Optics and Photonics
    • /
    • v.13 no.3
    • /
    • pp.228-234
    • /
    • 2002
  • We report theoretical investigation on the polarization selective coupling characteristics of a side-polished fiber directional coupler with a thin metal interlayer. Based on normal mode theory the coupling properties of the device under various structural conditions are analyzed. It is shown that the coupling strength between TE modes weakens rapidly with increase or metal interlayer thickness, whereas that between TM modes becomes stronger. The design conditions of the polarization splitter using the coupler to achieve high extinction ratio and low insertion loss are presented.

Optimized design of the multimode interferenced-polarization splitter with a photodefinable polyimide (감광성 폴리이미드 재료를 가정한 다중모드 간섭 편광분리 소자의 최적설계)

  • Hong, Jung-Moo;Ryoo, Hyun-Ho;Jeong, Jae-Wan;Lee, Seung-Gol;Lee, El-Hang;Park, Se-Geun;O, Beom-Hoan;Woo, Deok-Ha;Kim, Sun-Ho
    • Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
    • /
    • 2002.04b
    • /
    • pp.101-104
    • /
    • 2002
  • The beam splitter is important in optical communication systems. in this work, thc quasi-state based on four-mode interference in thc MMI coupler is proposed, and so, device length is shorten to be 1/5 of general designed length. We designed thc polarization splitter based on thc concept of quasi-state. Thc analysis has been accomplished by thc effective index method(EIM) and thc mode propagation analysis(MPA) for given structure.

  • PDF

Coherent Optical Components Technology (코히어런트 광통신 부품 기술)

  • Kwon, Y.H.;Kim, D.J.;Kim, J.H.;Choe, J.S.;Youn, C.J.;Choi, K.S.;Nam, E.S.
    • Electronics and Telecommunications Trends
    • /
    • v.25 no.5
    • /
    • pp.47-58
    • /
    • 2010
  • 최근의 코히어런트 광통선 기술의 발전에 힘있어, 차세대 대용량 광통신 분야에 있어서 기술혁신이 이루어지고 있다, 코히어런트 광통신 기술은 100Gbps급의 전송망에서 표준으로 채택되었을 뿐만 아니라, 그 이상의 속도를 가지는 광통신망을 실현할 유일한 대안으로 그 중요성이 더해 갈 것으로 전망된다. 본 고에서는 그 중에서 직교위상변조기, 편광변환기, 편광분리기, 광하이브리드 및 밸런스 광검출기 등의 핵심 광부품기술의 현황 및 전망에 대해서 기술하였다.

Temperature measurements using optical retarder (광 위상지연기를 이용한 온도측정)

  • 전상민;김용평
    • Korean Journal of Optics and Photonics
    • /
    • v.13 no.3
    • /
    • pp.240-244
    • /
    • 2002
  • We proposed a novel temperature sensor based on the phenomena that the phase difference between principal polarization states in an optical retarder is a function of temperature. The polarization state of an optical beam is changed as it passes through the optical retarder, with the change dependent on the temperature. The temperature of the optical retarder is determined by comparison of the power difference between principal polarization states. A temperature sensor was successfully implemented using a polarization maintaining fiber of length 100 mm as the optical retarder. The change rate of phase difference on temperature was 0.236$^{\circ}C$$_{-1}$ and the measurement error was $\pm$0.038$^{\circ}C$ over the temperature region of -2.6$^{\circ}C$~3.4$^{\circ}C$.