• Korean Journal of Optics and Photonics
• /
• 제15권6호
• /
• pp.563-568
• /
• 2004

The high temperature proton exchange (HTPE) method was used to fabricate optical waveguides based on LiNbO$_3$, which gives rise to low propagation loss and high polarization extinction ratio. To characterize the refractive index distribution of the fabricated waveguides, the guided modes of each waveguide were observed using the prism coupling method and then the refractive index profile was calculated by the inverse WKB method with the least square fitting. Finally, we showed how the HTPE parameters such as the temperature of PE, the concentration of lithium additive, and the time of PE effect the refractive index profile.

• Korean Journal of Optics and Photonics
• /
• 제14권1호
• /
• pp.44-50
• /
• 2003

This paper describes the thermal effect at Nd:YAG using a laser-diode side-pumping. To detect the depolarization loss and the retardation caused by the thermal effect, a λ/4 plate is inserted between the polarizer and the Nd:YAG laser material. Using a CCD has allowed detection of the variation of the beam pattern that could analyze the change of the refractive index of the Nd:YAG laser material by the thermal effect. Through the change of the probe beam power, we know that 21% of the pumping power was converted into heat in the material. The depolarization loss was 24.7% under a temperature of $25^{\circ}C$ of the laser material and a pumping power of 15 W. The inhomogeneous distribution showed that the retardation angle was 7$^{\circ}$ in the center of the material and 19$^{\circ}$ on the edge of it. It is confirmed that the thermal effect is analyzed at the each point of the laser material and it suggests an effective method to reduce the thermal effect on the LD side-pumped laser material.

• Journal of the Korean Institute of Telematics and Electronics D
• /
• 제34D권7호
• /
• pp.56-61
• /
• 1997

I $n_{0.53}$G $a_{0.47}$As/I $n_{0.52}$A $l_{0.48}$As pseudomorphic high electron mobility transistor (P-HEMT) structures were grown on semi-insulating InP substrates by molecular beam epitzxy method. The hall effect measuremetn was used to measure the electrical properties and the photoluminescence (PL) measurement was used to measure the electrical properties and the photoluminescence(PL) measurement for optical propety. By the cross-sectional transmission electron microscopy (XTEM) investigation of the V and X shape defects including slip with angle of 60.deg. C and 120.deg. C to surface in the sampel, the defects formation mecahnism in the I $n_{0.52}$A $l_{0.48}$As epilayers on InP substrates could be explained with the different thermal expansion coefficients between I $n_{0.52}$A $l_{0.48}$As epilayers and InP substrate.d InP substrate.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• 제24권9호
• /
• pp.2313-2318
• /
• 2000

The method of photoelasticity allows one to obtain principal stress differences and principal stress directions in a photoelastic model. In the classical approach, the photoelastic parameters are measured manually point by point. This is time consuming and requires skill in the identification and measurement of photoelastic data. Fringe phase shifting method has been recently developed and widely used to measure and analyze fringe data in photo-mechanics. This paper presents the test results of photoelastic fringe phase shifting method for the stress analysis of a curved beam plate. The technique used here requires four phase stepped photoelastic images obtained from a circular polariscope by rotating the analyzer at 0˚, 45˚, 90˚ and 135˚. Experimental results are compared with those of ANSYS and calculated by the simple beam theory. Good agreement among the results can be observed.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• 제28권3호
• /
• pp.245-250
• /
• 2004

This paper proposes a new method of measuring an air interface distance between a solid immersion lens(SIL) applied magneto-optic technology and the disk surface. For applying near-field recording (NFR) technology to the magneto-optic storage devices for the next generation, it is positively necessary to maintain the small air gap under about 100㎚. We design an apparatus that consists of some optical components such as a prism, a polarizer and an analyzer. By using the Fresnel reflection coefficient equation, Jones matrices calculation and Malus's law, we establish a mathematical model for understanding the characteristics of the system. The simulations are based on the mathematical model and through the simulation results which is made with various cases we can estimate the performance of the new optical gap sensor system. Experimental results, which are also based on the mathematical model for specific cases, are in good agreement with simulated ones and demonstrate the possibility as the new optical gap sensor.

• Korean Journal of Optics and Photonics
• /
• 제9권2호
• /
• pp.96-99
• /
• 1998

In this study, a novel long term stabilization method of optical feedback for the resonant cavity coupled semiconductor lasers is proposed, and its utility was shown experimentally. The proposed method is realized by using the pahse discriminator of optical feedback with high gain. The phase discriminating signal was obtained by the polarization spectroscopic technique using reflection light from the external reflector, which is a confocal Fabry-Perot cavity. Experimental result shows that stable control state can be maintained up to 20 hours. The period can be increased by reducing size of the system and/or fixing position stably of optical parts used, which were arranged on an optical table by using magnetic bases in this experiment. The proposed long-term stabilization method of optical feedack of a resonant external cavity coupled semiconductor laser is very useful for the field of high sensitivity measurement, and for the use in the laboratory level in particular.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 한국정보통신학회 2015년도 추계학술대회
• /
• pp.681-684
• /
• 2015

Magnetization is very important in the ferro-magnetic physics and provides useful informations in the application field of magnetic devices. Generally, the only first acquired domain pattern is not helpful to recognize domain pattern. Many images are needed to visualize domain pattern through image processing. These images were obtained a 8-bit digital camera. The operation was the subtraction of pixel values of multi domain imanges from the images with 255 of pixel value, which was obtained in the saturated state of magnetic materials. The magnetic domain images was visualized gradually with increasing the number of subtracion operation. LABVIEW was used as an image processing tool and the optic microscope with a polarizer was used in this experiment.

• Elastomers and Composites
• /
• 제41권2호
• /
• pp.108-115
• /
• 2006

A series of thermotropic polyurethanes containing biphenyl units was synthesized by polyaddition reaction of diisocyanates such as 2,6-tolylene diisocyanate, 2,5-tolylene diisocyanate, 2,4-tolylene diisocyanate, 1,4-phenylene diisocyanate, and hexamethylene diisocyanate with 4,4'-Bis(9-hydroxynonoxy)biphenyl (BP9). 4,4'-bis(9-hydroxynonoxy)biphenyl exhibited a smectic type mesophase. Mesophase was found for all synthesized liquid crystalline polyurethanes except 1,4-PDI/BP9 based polyurethane. Structures of the monomer and the corresponding polymers were identified using FT-IR and $^1H-NMR$ spectroscopies. Their phase transition temperatures and thermal stability were also investigated by differential scanning calorimetry and optical polarizing microscopy.

• Korean Journal of Optics and Photonics
• /
• 제6권3호
• /
• pp.228-232
• /
• 1995

We have made modulation doped SMQW-PBH-DFB-LD for high speed optical communications. The waveguide and barrier layers were doped by Zn with the concentration of $1.2 \times 10^{18}cm^{-1}$. Mean threshold current and slope efficiency were 24.88 mA (minimum 16 mA) and 0.197 mW/mA (maximum 0.275 mW/mA) respectively. Linewidth enhancement factor ($\alpha$) of MD-SMQW-PBH-DFB-LD was reduced than that of SMQW-PBH-DFB-LD. Linewidth enhancement factor of 1.8 owes to the large gain coefficient of modulation doped active layer. The resonance frequency was linearly increased with the square root of optical power. The resonance frequency in small signal modulation was measured as 8 GHz and -3 dB modulation bandwidth was 10 GHzat $46mA(I_{th}+30mA)$..

• Proceedings of the Korean Vacuum Society Conference
• /
• 한국진공학회 2013년도 제45회 하계 정기학술대회 초록집
• /
• pp.225.2-225.2
• /
• 2013

실리콘기반의 광전변환 소자는 소자공정의 편의성, 소자 신뢰성, 화학적 안정성, 그리고 저가경쟁력 등의 이점 때문에 수 십 년간 널리 연구되어 왔다. 그러나, 실리콘 재료의 경우 높은 굴절률로 인해 표면에서 높은 광 반사도를 가지고 있다. 일반적으로, 태양전지의 광전변환 효율은 빛이 서로 다른 유전율을 가진 계를 통과할 때 발생하는 계면반사로 인한 물리적인 한계를 가진다. Indium Tin Oxide (ITO)는 발광 다이오드, 태양전지, 그리고 광 검출기 등의 광소자에 적용하기 위해 수 년간 투명전도 산화막 재료로서 연구되어 왔다. ITO의 뛰어난 광학적, 전기적 특성은 높은 투과도와 낮은 전기 전도도를 요구하는 소자 응용에 대해 유망한 후보로 거듭나게 했다. 게다가, ITO의 굴절률은 대략 2정도이다. 그 결과, ITO는 반도체 기반 태양전지의 무반사 코팅 소재로서도 장점을 가지고 있다. 본 연구는 전자빔 증착법으로 경사입사 증착을 하여 실리콘 기반 태양전지에 증착될 ITO 박막의 굴절률을 조절한다. 여기서, 실리콘의 굴절률은 대략 3.5정도이다. 그러므로, 더 나은 광학적 특성을 가지기 위해 다층으로 올려진 ITO 박막이 점진적인 굴절률 변화를 가지는 것을 필요로 한다. 점진적 굴절률 변화를 가진 무반사 박막이 실리콘 태양전지의 특성에 미치는 영향을 평가하기 위해 광전변환 효율을 측정하였다. 증착된 박막의 굴절률과 표면형상은 각각 타원편광분석과 Atomic Force Microscopy (AFM)을 통해 분석되었다. 또한, 소자의 단면형상은 Scanning Electron Microscopy (SEM)으로 측정되었다.