• 한국신재생에너지학회:학술대회논문집
• /
• 2010.11a
• /
• pp.152.2-152.2
• /
• 2010

LFG는 매립된 폐기물 중 유기성분이 혐기성조건에서 미생물에 의해 분해가 되면서 발생하며, 이러한 매립지가스는 주변 지역의 자연 및 생활환경에 악영향을 미치기 때문에 소각 등의 방법으로 LFG를 처리하고 있다. 일반적으로 매립지로부터 발생하는 가스의 량은 폐기물 1톤 당 $150{\sim}250m^3$로서 매립 후 2~3년 후에 최대량이 발생하며 매립 후 20~30년 후까지 지속적으로 발생함으로 안정적인 LFG의 공급이 가능하며, 메탄함량이 50%인 경우 약 $5,000kcal/m^3$의 높은 발열량을 가지므로 대체에너지원으로 이용할 경우 환경적인 문제 해결 및 신재생에너지원으로 활용할 수 있다. LFG 자원화 할 경우 가장 안정적인 방안으로 발전 및 중질가스로 활용하는 것이나, 발전의 경우 최소 200만톤 이상의 매립용량을 갖추어야 경제적인 사업성을 확보할 수 있으며, 중질가스로 활용하는 경우 인근에 가스 수요처를 확보해야 하는 어려움이 있다. 만약 중 소규모의 매립장에서 발생하는 LFG를 안전하고 경제적인 조건으로 저장 및 수송할 수 있다면 중 소규모의 매립지에서 발생하는 LFG도 활용할 수 있을 것으로 기대되며, 안전하고 경제적인 저장과 수송기술을 통하여 발전이 아닌 중질가스로의 활용도 가능하게 될 것이다. 또한 여러 곳의 매립장에서 발생한 LFG를 한 곳으로 집중시켜 고질가스로 전환하는 설비비용을 절감할 수 있으며, 정제된 고질가스를 이용하여 발전보다 경제적인 자동차 연료나 도시가스로 활용할 수 있을 것이다. 본 연구에서는 LFG의 저장과 수송기술 중 GTS 기술을 통하여 저장과 수송에 제약이 크고 많은 비용이 소비되는 기체 상태의 에너지원을 하이드레이트화 시킴으로서 중 소규모 매립지에서 상대적으로 적은 비용으로 가스저장과 지상수송이 가능하게 할 수 있다. 본 연구의 결과로 LFG 에너지화 실증화 플랜트를 설계/제작 하였으며, 메탄+이산화탄소+물 하이드레이트 형성 실험 결과 4.56 Mpa, 277.2 K 조건에서 3시간을 한 사이클로 하는 공정운전을 가지는 것을 확인하였다. 이때 생성된 슬러리상의 하이드레이트를 고압으로 배출하여 펠릿으로 형성시켰으며, 형성된 하이드레이트 펠릿의 경우 92.27%의 메탄을 포함하는 것을 확인하였다.

• Food Engineering Progress
• /
• v.14 no.2
• /
• pp.99-105
• /
• 2010

Proximate composition of whole hemp seed, paste viscosity of whole hemp seed pellets, bulk density, color, compression force, water solubility and absorption index and bowl life of whole hemp seed flakes manufactured by extrusion process were determined to evaluate whole hemp seed as flake additive. Extrusion process conditions were 35% of moisture content and 90, 100 and 110$^{\circ}C$ of barrel temperature. Content of moisture content, crude protein, crude fat, crude ash from whole hemp seed were 5.67${\pm}$0.02%, 25.93${\pm}$0.16%, 28.21${\pm}$0.56% and 7.70${\pm}$0.08%, respectively. The pellets hemp seed at 100 or 110$^{\circ}C$ had higher paste viscosity as compared to those pellet at 90$^{\circ}C$. The bulk density values of all hemp seed flakes were between 0.24 to 0.43 g/mL, depending on the barrel temperatures. The hardness of flake increased with decreasing percentage of hemp seed in flakes. An increase in barrel temperature from 90$^{\circ}C$ to 110$^{\circ}C$ resulted in increase of WSI and decrease of WAI. The bowl life of hemp seed flakes was increased from 5.8 to 15.5 min with the decrease in percentage of hemp seed. The highest overall quality was showed in flake added with 20% of hemp seed.

• Korean Journal of Food Science and Technology
• /
• v.39 no.2
• /
• pp.146-151
• /
• 2007

Resistant starch (RS) content, paste viscosity, water solubility and absorption index, bulk density, color, compression force, and bowl life of Goami flakes manufactured by extrusion process were determined to evaluate Goami (high fiber rice) as a food material. Various extrusion process conditions included barrel temperature (90, 110, $130^{\circ}C$) and moisture content (50, 55%). RS content in the extruded pellet and defatted flake ranged from $8.00{\sim}8.56%$ and $6.57{\sim}9.53%$ respectively. RS content increased as moisture increased from 50% to 55%. Peak viscosity, trough viscosity, final viscosity, and setback viscosity of the extruded pellet and defatted flake decreased with steeping for 1 hr, and the breakdown viscosity significantly increased. The water solubility and absorption index increased in the flake compared to Goami and extruded pellet. The water solubility index of the extruded pellet was lower than that of Goami, while its water absorption index was higher than Goami. The bulk density of the flake ranged from $0.35{\sim}0.44$ g/mL. The bowl life of the flake was $12.4{\sim}19.4$ min, which was longer than commercial breakfast cereals on the market.

• Journal of the Korean Wood Science and Technology
• /
• v.43 no.1
• /
• pp.122-134
• /
• 2015

This study was conducted to investigate the potential of torrefied larch wood as a raw material of pellets. First of all, larch chip was torrefied at the temperatures of 230, 250 and $270^{\circ}C$ for 30, 50 and 70 min. Secondly, moisture content, moisture absorption, higher heating value and ash content of the torrefied chip were measured to examine the effects of torrefaction conditions on the fuel characteristics of larch. Thirdly, surfaces of the torrefied chip were observed by light microscope (LM), field emission scanning microscope (FE-SEM) and SEM-energy dispersive spectroscopy (EDXS). With the increases of torrefied temperature and time, contents of lignin increased and those of hemicellulose reduced. Moisture content of torrefied larch chip was greatly lower than that of non-torrefied chip. Moisture absorption of the torrefied chip decreased as torrefaction temperature increased. As torrefaction temperature increased, higher heating value and ash content of larch chip increased. However, durability of torrefied-larch pellets was remarkably lower comparing to non-torrefied-larch pellets. When surface of larch chip was observed by LM and FE-SEM, surface color and cell wall of the chip was getting darker and more collapsed with the increases of torrefaction conditions. Through the analysis of SEM-EDXS, distribution and quantity of lignin existing on the surface of larch chip increased with the increases of torrefied conditions. In conclusion, $270^{\circ}C$/50 min might be an optimal condition for the torrefaction of larch with the aspect of fuel characteristics, but torrefaction condition of $230^{\circ}C$/30 min should be considered according to the durability of torrefied-larch pellets.

• Journal of Korea Foresty Energy
• /
• v.22 no.2
• /
• pp.54-59
• /
• 2003

Recently, densified pellet fuel from wood biomass is widely used at North America and Europe as a regenerable and clean carbon neutral bioenergy. High-pressure compaction of sawdust of Hyunsasi-poplar (Populus alba ${\times}$ P. glandulosa) to form a densified fuel was studied. Calorific and elemental analysis were carried out to assess Hyunsasi-poplar clones as fuels. Hot-press process was adopted for compaction of sawdust and compaction was performed under temperature from 100 to 180$^{\circ}C$, at pressure of 250 to 1000 kgf/$\textrm{cm}^2$, and for 2.5 to 10 minutes. Densified fuels were evaluated by its oven-dry density and fines after 5-minute shaking test. The target density and fines of densified fuels were over 1.2 g/$\textrm{cm}^2$ and below 0.5%, respectively. When the press-temperature is over 160$^{\circ}C$, densified fuels with density eve. 1.2 g/$\textrm{cm}^2$ and with fines below 0.5% can be produced. And the pressure over 750 kgf/$\textrm{cm}^2$ was effective for this production. It was found that the optimum press condition for preparation of densified fuel was 180$^{\circ}C$ -1000 kgf/$\textrm{cm}^2$ minutes.

• Resources Recycling
• /
• v.21 no.1
• /
• pp.75-81
• /
• 2012

Porous pellets for immobilizing heavy metals were manufactured from coal tailings and iron oxide powder. Coal tailings was pulverized and mixed with iron oxide powder. The mixed powder was granulated into spherical pellets and roasted. Over $1100^{\circ}C$, residual coal in coal tailings reduced iron oxide to ZVI(Zero-Valent Iron). The pellets have 34.63% of porosity, 1.31 g/mL of bulk density, and 9.82.urn median pore diameter. The pellets were reacted with synthetic solutions containing each heavy metals: arsenic(V), copper(II), chrome(VI), and cadmium(II), respectively. On the test of immobilizing heavy metal, the pellets made at $1100^{\circ}C$ were superior to the other pellets made under $1000^{\circ}C$. Immobilizing over 99.9% of 10ppm heavy metal solutions required I hour for arsenic, 2 hours for chrome, and 4 hours for copper. However, immobilizing capacity of cadmium was inferior to that of the other metals and it was decreased in reversely proportion to initial concentration of the solutions.

• Journal of Energy Engineering
• /
• v.19 no.4
• /
• pp.215-220
• /
• 2010

Hydrogen is a clean and efficient energy source and is expected to take an important role in future energy demand. A possibly good route to produce hydrogen is by using biomass and organic wastes as a source through thermo-chemical conversion technology. In this study, pyrolysis of wood Pellet(Oregon pine) has been carried out in batch type fixed-bed reactor in $N_2$ atmosphere during 20 minutes to determine the optimum hydrogen generating conditions. At the influence of temperature, hydrogen yield was increased with increasing temperature. For the influence of Steam/Biomass Ratio(SBR), hydrogen yield was increased by steam addition at low temperature condition. However, effect of steam addition was insignificant over at SBR = 1. The hydrogen yield was increased with increasing SBR at high temperature condition. From result of $H_2$/CO and $H_2/CH_4$ ratio, dominant reaction was steam reforming in this experimental condition. The optimum condition for hydrogen production was determined as follows: $H_2$ yield = 38.3 vol.% (56.01 L/min kg) at $900^{\circ}C$, SBR=3.

• Journal of the Korean Ceramic Society
• /
• v.42 no.4
• /
• pp.237-244
• /
• 2005

We prepared the cylindrical $\gamma-alumina$ pellets of 5 mm in diameter and 10 mm in average length using amorphous alumina and pore generating agent. The pellets were immersed in an aqueous solution of the mixture of $Fe(NO_{3})_{3}{\cdot}9H_{2}O$ and $CH_{3}COOH$. They were then hydrothermally treated at $200^{\circ}C$ for 3 h in autoclave, dried and calcined. For the application as an environmental catalyst, we investigated the decomposition characteristics of aniline and the initiation characteristics of $OH^{\cdot}$ conversion action in $O_{3}$ environment with or without the $Fe_{2}O_{3}$ supported y-alumina catalyst and $O_{3}$ molecule.

• Food Engineering Progress
• /
• v.15 no.3
• /
• pp.257-261
• /
• 2011

Biodegradable plastics were developed using biodegradable pellets made of corn stalk and rice husk and their safety as food packages and their biodegradability against light (ultraviolet (UV)), heat, and fungi were evaluated. Four kinds of 50-${\mu}m$ biodegradable plastics were produced by extruding the mixtures of the biodegradable pellets, low-density polyethylene (LDPE), high-density polyethylene (HDPE), and linear low-density polyethylene (LLDPE) with different compositions. Developed biodegradable plastics were safe to be used as food packages. The initial tensile strength and percentage elongation of the plastics were similar to those of LDPE, but the values decreased with increased their exposure time to UV and heat. The fungal biodegradability of the biodegradable plastics was higher than that of LDPE. The biodegradability of the biodegradable plastics shows the potential for them to be used as sustainable food packages.

• Proceedings of the Korea Society for Energy Engineering kosee Conference
• /
• 2010.04a
• /
• pp.188-188
• /
• 2010

수소 에너지는 화석연료의 한정된 매장량과 연소시 발생되는 환경문제를 해결하기 위해 가장 이상적인 대체에너지로서 주목을 받고 있다. 그러나 현재까지의 기술로는 경제성 있는 수소 제조가 쉽지 않다. 그 방법 중 바이오매스 및 유기성폐기물의 가스화를 통한 수소제조분야는 자원의 재순환, 페기물 처리, 열원의 이용, 직접적인 $CO_2$ 삭감 등의 부수적인 효과가 높아 경제성 있는 수소제조법으로 평가되고 있다. 이에 본 연구에서는 수소 생산을 목적으로 하는 가스화기와 초고온개질기로 구성된 Twin-Bed 가스화 시스템을 개발하고, 이를 이용한 Wood pellet(미송)의 가스화 특성 및 생성 가스의 초고온개질 특성을 고찰하는 것을 목적으로 한다. 가스화기의 시간변화에 따른 생성 가스 수율에 대한 결과, 생성 가스 수율은 약 20분경과 후 안정화되었으며, 실험 2시간 동안의 $H_2,\;CH_4,\;CO,\;CO_2$의 평균 수율은 각각 17.77, 11.94, 42.13, 28.16 Vol.%의 결과를 보였다. 가스화기로부터 생성된 가스는 down-draft 형태의 고온개질기로 도입시켜, $1100^{\circ}C$의 초고온에서 개질반응을 수행하였다. $CH_4$의 경우 11.95 Vol.%에서 0 Vol.%로 거의 대부분 분해되었으며, $H_2$는 17.77 Vol.%에서 25.46 Vol.%로 약 65.8% 증가하는 결과를 나타냈다. 또한 수소 생성량은 평균 5 L/min kg-Biomass이었다. 냉가스 효율은 72.1%로서 나타나, 일반적으로 폐기물의 냉가스 효율인 약 50% 전후의 결과에 비하여 높은 효율을 보였다.