• Resources Recycling
• /
• v.28 no.2
• /
• pp.31-39
• /
• 2019

The pelletizing of printed circuit board (PCB) sludge was researched for copper recovery in pyrometallurgical process. This pelletizing was carried out by using self-manufactured compression-type apparatus after pre-treatments (drying, water scrubbing, size classification) were proceeded. The physical properties (compression strength and drop-breakage test) were tested with a change of sludge sizing and the number of compression. In the case of using the undersized sludge of #140, its properties were improved to 0.6 MPa and 9.3 times. Moreover, they increased to 0.82 MPa and 19.0 times by using the #140 ~ 325 sludge. These imply that the packing density increases due to the elimination of large-sized sludge (#140), and also the weight of required binder decreases by the removal of fine-sized sludge (#325).

• Journal of Animal Environmental Science
• /
• v.8 no.3
• /
• pp.191-198
• /
• 2002

This study was conducted to determine changes in internal temperature and chemical composition during the composting of broiler litter(BL) and to evaluate the feasibility of use of a small-scale pelletizer for the pelleting of composted BL. BL was composted for 4 weeks in an wooden cell with a size of 1 m length $\times$ 1 m width $\times$ 1.2 m height. Internal temperature reached to peak(68$^{\circ}C$) at the fourth day and thereafter gradually reduced. Among chemical components in BL, composting reduced organic matter content and increased dry matter and indigestible protein(ADF-CP) contents. When BL was pelleted using an economical small-scale pelletizer, the proper die diameter was 8~18 mm and the proper moisture content of composted BL was 20~25%. Beyond these proper conditions, addition of heat and pressure or pellet aids may be necessary. Pelleting of BL resulted in nearly threefold increase of bulk density, significant moisture evaporation, and little change in chemical components except for increased indigestible protein. In conclusion, BL may be converted into a feed with low to medium nutrition by the composting and pelleting process.

• KOREAN POULTRY JOURNAL
• /
• v.20 no.10 s.228
• /
• pp.68-71
• /
• 1988

• Journal of Life Science
• /
• v.13 no.4
• /
• pp.428-432
• /
• 2003

This study was carried out to develop and investigate integrated mechanization system for culture of carrot. Compared with the conventional hand planting, use of a mechanical planter for pelleted seeds resulted in a saving of planting time by 225 hours. An additional saving of 460 hours was obtained for thinning the seedlings. Besides seeds could be saved by 72%, planting and thinning be done only in 35 hours per ha field when the pelleted seeds were planted with a planter. Work hour reduced by adopting the mechanical planting of pelleted seeds sharply contrasted to that of 720 hours required for hand-planting the thinning hours, resulting in a reduction of labor by more than 95%. SMP followed pelleting tended not only to increase the percentage of seedling emergence in the field but to induce an a day earlier germination.

• Journal of Nuclear Fuel Cycle and Waste Technology(JNFCWT)
• /
• v.17 no.2
• /
• pp.203-212
• /
• 2019

Disposal nonconformity of radioactive wastes refers to radioactive wastes that need to be treated, solidified and packaged during operation or decommissioning of NPPs, and are typically exemplified by particulate radioactive wastes with dispersion characteristics. These wastes include the dried powders of concentrated wastes generated in the process of operating NPPs, slurry and sludge, various powdered wastes generated in the decommissioning process (crushed concrete, decontamination sludge, etc.), and fine radioactive soil, which is not easy to decontaminate. As these particulate wastes must be packaged so that they become non-dispersive, they are solidified with solidification agents such as cement and polymer. If they are treated using existing solidification methods, however, the volume of the final wastes will increase. This drawback may increase the disposal cost and reduce the acceptability of disposal sites. Accordingly, to solve these problems, this study investigates the pelletization of particulate radioactive wastes in order to reduce final waste volume.

• Journal of Bio-Environment Control
• /
• v.13 no.1
• /
• pp.8-15
• /
• 2004

Seedling mechanization of lettuce is known to be difficult due to the small seed size and the irregular seed shape. The purpose of seed pelleting is to make seedling mechanization possible by enlarging the seed size. After that, it can reduce seedling and thinning labours and can also save seeds. According to the results, there were significant differences on the percent germination and day to 50% final germination in accordance with the pelleting polymer. Among the pelleting polymer, gemination of seeds using polynimyl alcohol (PVA) was generally smooth, and followed by polyvinyl pyrrolidone (PVP), hydroxyethyl cellulose (HEC), methyl cellulose (MC), and wteen 80. The germination rate was also different according to the pelleting particulate matters. Generally, percent germination and speed of seed using the mixture of diatomaceous earth, talc and calcium carbonate were higher and faster than using other polleting materials, respectively. Thus, it should be suitable pelleting particulate matter for the pelleting of lettuce seeds. On the other hands germination of seeds using limestone, calcium oxide and benonite were low. The seed size of lettuce after pelleting was 33 times as large as the raw seed size. During the process of seed pelleting, netrient addition induced the decrement on the germination and the delay of germination speed. Also, there was differences in the germinability of pelleted seeds in accordance with the addition of nutrient sources. MS medium was generally lower than monosodium phosphate in inhibition of seed germination. Germination of pelleted seeds after priming was higher than the seeds without the treatment, and also showed the trend of early germination.

• Journal of the Korea Organic Resources Recycling Association
• /
• v.13 no.4
• /
• pp.118-127
• /
• 2005

The best way to treat livestock manure is a recycling the manure to arable land as an organic fertilizer. In this study, fermented cow manure compost and pig manure compost were used as a raw materials for pelletizing. The changes of physicochemical properties of each composts and pellets were investigated. The aim of this research was to improve availability of livestock manure compost. In pelletizing process of fermented livestock manure compost, the optimal water content to make pellet was around 40%. When clay was mixed by volume more than 15% as a bonding agent, the condition of pelletizing process was beginning to improve. On a dry matter basis, the contents of N, P and K of fermented pig manure compost were 2.05%, 1.89% and 1.31%, respectively. After pelletizing, the contents of compost pelleted with the pig manure compost were 1.96% 1.73% and 0.89%, respectively. The same parameters of cow manure compost were 2.52%, 1.01% and 2.98%, respectively. After processing, the contents of compost pelleted with the cow manure compost were 2.45%, 1.10% and 2.93%, respectively. After pelletizing, there were little change in the content of heavy metals such as Pb, Cd, As and Hg. When pelleted compost dried naturally was submerged in water, it was completely dissolved in 30 minutes. On the other hand, Pelleted compost dried with the mechanical convection oven set $70^{\circ}C$ for 24 hours was completely dissolved in 960 minutes. The volume and weight of pelleted compost were decreased with time. After 30 days of storing, the weight of pelleted compost was decreased by 15% compared with its original weight. The volume of it was decreased by 17~25% in the same time.

• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.50 no.spc1
• /
• pp.239-241
• /
• 2005

Alisma plantago seeds have some difficulties for mechanical sowing because of small, irregular and shrunken shapes. Thus it was intended to make seed pelleting for Alisma piantago seeds to solve these problem. The main object of this study was to find the best materials for Alisma plantago seeds pelleting. The most desirable shapes which provide a spherical and smooth surface of the pelleted seeds that enhance mechanical singling was made from the mixture of SDZ + DE + CA $0.4\%$. The pelleted seeds were easily broken after absorbing water and the germination rate of those was $95.3\%$ in lab.

• Proceedings of the Korean Radioactive Waste Society Conference
• /
• 2006.11a
• /
• pp.43-44
• /
• 2006

• Journal of Animal Science and Technology
• /
• v.45 no.1
• /
• pp.87-100
• /
• 2003

This study was conducted in order to determine a proper level of molasses addition through the analysis of changes in appearance, nutritive and silage parameters before and after ensiling or deepstacking of broiler litter, to evaluate the effect of pelleting processed broiler litter and to develop methods to enhance palatability of broiler litter and reduce the adjustment period by ‘Hanwoo’ steers. Molasses addition was effective in ensiling and deepstacking of broiler litter and the proper addition level was about 5%. Changes in nutritive values of broiler litter by ensiling and deepstacking with or without molasses treatment were not great. Adding 5% molasses at deepstacking of broiler litter did not affect(P<0.05) in vitro digestion of dry matter and organic matter. Pelleting of broiler litter resulted in significant(P<0.05) moisture evaporation, organic matter reduction and nearly threefold increase of bulk density. Pelleting or molasses addition of broiler litter improved palatability by ‘Hanwoo’ steers and reduced the adjustment period by half(8-9 d).