• KOREAN POULTRY JOURNAL
• /
• v.37 no.8 s.430
• /
• pp.111-113
• /
• 2005

장마철이 끝나고 폭염이 시작되는 8월이면 어김없이 찾아오는 닭 생산성 저하, 농가에서 태양열을 효과적으로 차단한다면 생산성 유지에 도움될 것이다. 특히 단열 시설이 부족한 계사에서는 단열에 대한 아쉬움이 더욱 커지기 마련이다. 그래서 이번 호에는 무리한 투자비용을 아끼면서 단열 효과를 누릴 수 있는 초단열용 페인트 첨가제를 보급하는 SEN21를 찾았다.

• Journal of Conservation Science
• /
• v.25 no.4
• /
• pp.421-430
• /
• 2009

This research was carried out focusing on the urgent treatment and related studies for paint scribbling on Samjeondobi Monument (Historic Sites No. 101) in 2007. Before the preliminary test, the paint lacquer used on the surface of Samjeondobi Monument was analyzed. The paint lacquer turned out to be the paint lacquer spray composed of $Pb_3O_4$ used for the red pigment in the market. It was proved that the poultice used with the organic solvent was the best way to remove the paint pollutants following the preliminary test for the removal of paint pollutants which was performed with various removal methods by the laser, etc. However, the removing the paint pollutants was found in difficulty in contrast to the preliminary tests because the paint on the spot was hardened so rapidly over time that there was difference from the situation of the laboratory. For that problem, the poultice method with ethylene dichloride of main component from Remover (goods in the market) was the most efficient, therefore the pollutants were removed with the solution of alkyds resin and nitrocellulose and the rest part was removed by the $Laponite^{(R)}$ RD.

• Clean Technology
• /
• v.28 no.1
• /
• pp.18-23
• /
• 2022

Using air as an insulator due to its low heat transfer coefficient has been studied and has been widely commercialized to save energy in the field of thermal insulation technology. In this study, we analyzed the heat insulating effect of hollow silica nanoparticles mixed in non-uniform size, and the maximum heat insulating efficiency of these particles given the limited number of particles that can be mixed with a medium such as paint. The hollow silica nanoparticles were synthesized via a sol-gel process using a polystyrene template in order to produce an air layer inside of the particles. After synthesis, the particles were analyzed for their insulation effect according to the size of the air layer by adding 5 wt % of the particles to paint and investigating the thermal insulation performance by a heat transfer experiment. When mixing the particles with white paint, the insulation efficiency was 15% or higher. Furthermore, the large particles, which had a large internal air layer, showed a 5% higher insulation performance than the small particles. By observing the difference in the insulation effect according to the internal air layer size of hollow silica nanoparticles, this research suggests that when using hollow particles as a paint additive, the particle size needs to be considered in order to maximize the air layer in the paint.

• Journal of Adhesion and Interface
• /
• v.20 no.1
• /
• pp.9-14
• /
• 2019

The change of three different reagents for electrical conductive paint using aircraft coating with elapsing time of exposure to different condition was investigated. Three different reagents were poured into the vial bottles, stored in air condition and room temperature and observed with elapsing days. In addition, adhesion property of paint was tried using cross cut tape test after storage of $N_2$ atmosphere. The weight of each different reagent was measured along with elapsing time. To confirm the change of chemical component with exposure of air atmosphere, FT-IR was performed. The weight of part A and Part B decreased slightly whereas the weight of part C decreased rapidly and the precipitation was remained. The part B was cured after exposure of $N_2$ atmosphere and the 2250 cm-1 from FT-IR peak decreased slowly at the same time. It was considered that the water contained in air accelerated the reaction of -NCO functional groups and it caused the curing whereas $N_2$ atmosphere not contained water and it resulted in the retardancy of curing.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2015.05a
• /
• pp.283-283
• /
• 2015

1,4-dioxane은 페인트, 광택제 및 코팅제의 제조시에 첨가되는 화학물질로 인간에 대한 발암 가능성과 수중에서의 지속성으로 인해 EPA priority pollutant로 지정되어 있다. 이에 최근 고도산화법을 이용한 처리가 계속적으로 연구되고 있으며, UV/$H_2O_2$ 공법을 통하여 수계에서 발견되는 난분해성 유기 오염물의 제거가 효과적인 것으로 밝혀졌다. 하지만 고도산화공정(AOP)은 다량의 에너지 소모와 산화제 투여로 인한 높은 운전비용이 현실적인 적용에 장애가 되고 있다. 한편 상대적으로 저렴한 비용으로 1,4-dioxane을 처리할 수 있다는 장점으로 인하여 생물학적 분해에 대한 많은 연구가 진행되어 왔다. 하지만, 1,4-dioxane에 대한 많은 연구들이 주로 분해미생물의 분리동정 및 회분식 분해특성에 대한 연구들 위주로 보다 실질적인 연속적 처리반응조의 운전결과들은 거의보고 되지 않고 있다. 본 연구는 Lab scale 연속처리반응조의 장기운전 후 pilot plant 현장적용에 앞서 인공폐수와 합성폐수에서의 분해효율 비교 회분식 실험을 통해 합성폐수내 생물학적 분해에 영향을 미치는 inhibitor의 영향을 확인하였으며, 미생물의 배양 조건에 따른 분해효율 비교 회분식 실험과 modeling을 통하여 현장운영 효율을 예측하였다. 이를 반영하여 추후 진행예정인 pilot plant의 현장 적용성 검토 및 최적 설계인자 도출, 장기운전에서의 효율성 증대를 목적으로 한다.

• Journal of the Korean Applied Science and Technology
• /
• v.38 no.6
• /
• pp.1533-1542
• /
• 2021

Eco-friendly polyurethane can be defined as a highly utilized material used in various fields. The various structural properties of the synthesis of isocyanates and polyols provide versatility and customization for use in the manufacturing field. The characteristics of polyurethane vary widely from soft touch coatings to hard building materials like rocks. These mechanical, chemical and biological properties and ease of alignment are drawing tremendous attention not only in the field of research but also in related industries. In order to improve the performance of water-dispersible polyurethane materials, it can be derived through processes such as adjusting the blending of raw materials and adding additives and nanomaterials. This study highlights the basic chemical structure of eco-friendly water-dispersible polyurethane in the fields of medical science, automobiles, coatings, adhesives, paints, textiles, marine industries, wood composite materials, and clothing.

• Journal of the Korean Wood Science and Technology
• /
• v.37 no.6
• /
• pp.537-545
• /
• 2009

The objective of this study was to investigate potential usage of environmentally friendly building materials, liquid mortar and dry cement mortar mixed with charcoal, based on the test of their physical and chemical properties. From the test results of physical and chemical properties of the liquid mortar mixed with charcoal, liquid mortar containing over 20% of charcoal, the consistency viscosity and the non-volatile content met a standard requirement. Drying time was delayed with increase in charcoal contents in the liquid mortar, however they were fully cured within 60 minutes in all treated levels. Other properties were acceptable at standard requirement. From the results, it was found that the proper charcoal addition level to the liquid mortar was 25%. In the results on dry cement, it was found that samples containing 5% of charcoal showed the maximum compressive strength, whereas samples containing over 20% of charcoal did not reach the minimum requirement of KS standard. Water retention ability constantly increased as the charcoal ratio increased. The conventional dry cement mortar adsorbed 59.5% of it, in the test of adsorption rate on ammonia gas, whereas cement mortar containing 10% of charcoal showed 71.6% of ammonia gas adsorption.

• Economic and Environmental Geology
• /
• v.56 no.3
• /
• pp.229-238
• /
• 2023

Bentonite is a type of rock that has been used as a traditional mineral medicine. It has a variety of pharmacological activities, and is used in traditional Korean medicine to treat jaundice, diarrhea, and hemostasis. In modern medicine, it is used as a raw material and additive for medicines such as antacids, gastrointestinal protective agents, and laxatives. Bentonite produced in Korea was produced through diagenesis or hydrothermal alteration of tertiary volcanic debris distributed in the Pohang and Gyeongju areas. It is mainly used for industrial purposes such as papermaking, paint, civil engineering, casting, and animal feed. Recently, technology is being developed to use it in cosmetics and pharmaceuticals. In this study, the geochemical characteristics of bentonite were identified by analyzing the main components and trace elements of 40 and 21 types of bentonite produced in the Gampo Gyeongju and Yeonil Pohang area. Also it were classifed by formation envrionment of bentonite deposits in the Gampo and Yeonil. As a result of the study, bentonite from the reserch area may be cased by argillic alteraton that alkali elements are removed form basaltic rocks by hydrothermal fluids and AI-CCPI alteration indices wrere also indentified argillic alteraton. It was found that there is a correlation between the behavior characteristics of heavy metal elements (P b, Cr, As) and the hydrothermal alteration of bentonite in the reserch area.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.16 no.1
• /
• pp.888-894
• /
• 2015

Inorganic composite particles have excellent physical and chemical characteristics and have been applied in various industries. Recently, many studies have examined the optical properties, such as light scattering, refraction, transmission characteristics, by coating organic-inorganic materials on a substrate, such as mica. Mica is widely applied as a pigment, plastics, painted products, and ceramics because of its high chemical stability, durability and non-toxicity. Magnesium oxide has a range of properties, such as high light transmittance, corrosion resistance and non-toxicity, and it is used as an optical material and polymer additives. To use the optical properties of mica and magnesium oxide, mica was coated with magnesium hydroxide by a dissolution and recrystallization process. In this study, the optimal conditions for the haze value of the particles were found by adjusting the amount of precursors and pH. Magnesium hydroxide layers were formed on the surfaces of mica and converted to MgO after calcination at $400^{\circ}C$ for 4 h. The results showed that the value of MgO-coated mica haze can be controlled easily by the amount of the magnesium hydroxide and pH. The optical properties of the inorganic composite powder were analyzed using a hazemeter and the highest haze value was 85.92 % at pH 9. The physicochemical properties of the synthesized composite was analyzed by SEM, XRD, EDS, and PSA.