• Journal of KIISE:Software and Applications
• /
• v.37 no.11
• /
• pp.851-858
• /
• 2010

Most mobile devices use a NAND flash memory as their secondary memory. A compressed code of the firmware is stored in the NAND flash memory of mobile devices in order to reduce the size and the loading time of the firmware from the NAND flash memory to a main memory. In order to use a demand paging properly, a compressed code should be decompressed very quickly. The thesis introduces a new dictionary based compression algorithm for the fast decompression. The introduced compression algorithm uses a different method with the current LZ method by storing the "exclusive or" value of the two instructions when the instruction for compression is not equal to the referenced instruction. Therefore, the thesis introduces a new compression format that minimizes the bit operation in order to improve the speed of decompression. The experimental results show that the decoding time is reduced up to 5 times and the compression ratio is improved up to 4% compared to the zlib. Moreover, the proposed compression method with the fast decoding time leads to 10-20% speed up of booting time compared to the booting time of the uncompressed method.

• Journal of the Korea Society of Computer and Information
• /
• v.11 no.6 s.44
• /
• pp.113-123
• /
• 2006

Flash memory has been increasingly used in handhold devices not only for data storage, but also for code storage. Because NAND flash memory only provides sequential access feature, a traditionally accepted solution to execute the program from NAND flash memory is shadowing. But, shadowing has significant drawbacks increasing a booting time of the system and consuming severe DRAM space. Demand paging has obtained significant attention for program execution from NAND flash memory. But. one of the issues is that there has been no effort to bound demand paging cost in flash memory and to analyze the worst case performance of demand paging. For the worst case timing analysis of programs running from NAND flash memory. the worst case demand paging costs should be estimated. In this paper, we propose two different WCRT analysis methods considering demand paging costs, DP-Pessimistic and DP-Accurate, depending on the accuracy and the complexity of analysis. Also, we compare the accuracy butween DP-Pessimistic and DP-Accurate by using the simulation.

• Journal of KIISE:Computer Systems and Theory
• /
• v.27 no.6
• /
• pp.583-591
• /
• 2000

Caching mechanisms have been studied extensively to buffer the speed gap of hierarchical storages in the context of cache memory, paging system, and buffer management system. As the wide-area distributed environments such as the WWW extend broadly, caching of remote objects becomes more and more important. In the wide-area distributed environments, the cost and the benefit of caching an object is not uniform due to the location of the object; which should be considered in the cache replacement algorithms. For online operation, the time complexity of the replacement algorithm should not be excessive. To date, most replacement algorithms for the wide-area distributed environments do not meet both the non-uniformity of objects and the time complexity constraint. This paper proposes a replacement algorithm which considers the non-uniformity of objects properly; it also allows for an efficient implementation. Trace-driven simulations show that proposed algorithm outperforms existing replacement algorithms.

• KIPS Transactions on Computer and Communication Systems
• /
• v.1 no.3
• /
• pp.219-228
• /
• 2012

As the wireless Internet become more widely accessible, variety of Internet services can be used without limitation of location. However, existing mobility management methods such as MIP and PMIP of IETF requires the load of heavy protocol stack on the mobile nodes or the addition of components such as LMA and MAG. In this paper, we proposed the location management technique in the PMIPv6 and Fast Handover technique. according to the moving pattern of the node, the location management technique proposed in order to adjust the paging area dynamically. The Fast Handover technique applied MIH technology and it reduced the handover signal processing time between heterogeneous network. The location management cost in the environment which the node moves in order to evaluate this and handover delay time was calculate. The proposal technique was efficiently more evaluated than PMIPv6 with the smallest 29% and maximum 83%.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.10 no.3
• /
• pp.401-411
• /
• 1999

IMT-2000 will provide worldwide mobile telecommunication services with the extended coverage areas such as polar regions and mountainous district. GMPCS also provides global telephony and paging services via satellite network at the altitude of 500~12,000 km. "Big LEO" which is one of the GMPCS systems using frequency above 1 GHz and IMT-2000 will share the frequency range of 1 to 3 GHz. Therefore, there exists possible interference between the two systems which can cause the performance degradation of both systems. In this paper, the radio-propagation modeling and interference analysis methods are presented and these methods are used to analyse the effect of the interference between IMT-2000 and GMPCS on system performance.rformance.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.36 no.1
• /
• pp.37-42
• /
• 2012

LIFT (laser-induced forward transfer) is an advanced laser processing method used for selectively transferring micron-sized objects. In our study, this process was applied in order to deposit solder balls in microsystem packaging processes for electronics. Locally melted solder paste could be transferred to a rigid substrate using laser pulses. A thin glass plate with a solder cream layer was used as a donor film, and an IR laser pulse (wavelength = 1070 nm) was used to transfer a micron-sized solder ball to the receptor. Mass balance and energy balance were applied to analyze the shape and temperature profiles of the solder paste drops. The transferred solder bumps had measured diameters of 30-40 ${\mu}m$ and thicknesses of 50 ${\mu}m$ in our experiment. The limits and applications of this method are also presented.

• Journal of the Society of Cosmetic Scientists of Korea
• /
• v.44 no.2
• /
• pp.125-131
• /
• 2018

Ascorbic acid (Vitamin C) has been widely used in skin care formulations. Due to its remarkable effects on anti-oxidation, collagen biosynthesis and whitening, ascorbic acid is considered as an effectible anti-aging active ingredient. But, the instability problems of ascorbic acid in cosmetic formulation such as oxidation, browning and changes in smell is the difficult issue to be overcome for the application of high concentration of ascorbic acid. We tried to stabilize the ascorbic acid in non-aqueous liquid formulation that contains polyol solvent at first. The non-aqueous system was effectible to reduce oxidation. But, ascorbic acid was crystallized in the non-aqueous formulation at the low temperature below $5^{\circ}C$. We tried to develop way to stabilize the ascorbic acid in aqueous solutions to solve the crystallizing problem. In this study, we search the optimal ratio of antioxidant combination, such as zinc sulfate, glutathione and curcuma longa (turmeric) root extract. Formulations were stored at - $16^{\circ}C$, $5^{\circ}C$, $25^{\circ}C$, $40^{\circ}C$, $50^{\circ}C$ and cycle($5-40^{\circ}C$) (in incubator) for a period of eight weeks to investigate their stability. In the stability analysis, the test parameters consisted of color, scent, phase separation and sedimentation. Ascorbic acid stability was checked by HPLC analysis.

• The KIPS Transactions:PartA
• /
• v.8A no.4
• /
• pp.469-478
• /
• 2001

In the virtual memory system, page replacement policy exerts a great influence on the performance of demand paging. There are LRU(Least Recently Used) and LFU (Least Frequently Used) as the typical replacement policies. The LRU policy performs effectively in many cases and adapts well to the changing workloads compared to other policies. It however cannot distinguish well between frequently and infrequently referenced pages. The LFU policy requires that the page with the smallest reference count be replaced. Though it considers all the references in the past, it cannot discriminate between references that occurred far back in the past and the more recent ones. Thus, it cannot adapt well to the changing workload. In this paper, we first analyze memory reference patterns of eight applications. The patterns show that the recently referenced pages or the frequently referenced pages are accessed continuously as the case may be. So it is rather hard to optimize page replacement scheme by using just one of the LRU or LFU policy. This paper makes an attempt to combine the advantages of the two policies and proposes a new page replacement policy. In the proposed policy, paging list is divided into two lists (LRU and LFU lists). By keeping the two lists in recency and reference frequency order respectively, we try to restrain the highly referenced pages in the past from being replaced by the LRU policy. Results from trace-driven simulations show that there exists points on the spectrum at which the proposed policy performs better than the previously known policies for the workloads we considered. Especially, we can see that our policy outperforms the existing ones in such applications that have reference patterns of re-accessing the frequently referenced pages in the past after some time.

• The Korean Journal of Emergency Medical Services
• /
• v.13 no.3
• /
• pp.41-58
• /
• 2009

Objective : The purpose of this study is to identify actual operations and issues of wireless paging system operation for the aged living alone as the end users of wireless paging system primarily in Gwangyang city, and thereby to explore possible advanced and integrated ways to promote social safety network for the aged. Methods : The survey tool used in this study was a structured questionnaire form consisting of question items. The researcher hereof conducted this survey by means of direct visit and interview during two seasons, i.e. from February to August, 2008 and from December 2008 to March 2009, respectively. Results : 1) For general demographic characteristics, it was found that 90.9% of all respondents were women and 61.2% of all respondents were at age 75 to 84. for health conditions, it was found that more than 90% of all respondents often took medicines due to their unhealthy body, and most of respondents suffered from musculoskeletal diseases 79.3% and circulatory diseases 61.6%. for walking capacity, it was found that 45.5% of all respondents used walking aids, and disable respondents (11.5% of all respondents) were represented primarily by those with physical disability (52.6% of disable respondents). for actual use of medical institutions, it was found 47.3% of all respondents relied on local clinics, since they preferred neighborhood hospitals or clinics they can trust for medical care. for social activities and supports, it was found that 43.6% respondents had 'needs for assistance at times' and 33.9% respondents have 'no need for assistance'. And it was found that the major difficulties in living alone at old age were represented primarily by health problems 37.8% and economic difficulties 33.5%. 2) For characteristics related to wireless paging system, it was found that 90.3% respondents used wireless paging system recommended by firemen, and 28.5% respondents used this system. and it was found that 59.6% respondents used this system once, and 85.2% respondents used it because of acute or chronic diseases. more than 90% respondents thought that they knew about wireless paging system and considered themselves safe, but 83.6% respondents didn't attach a remote control on their upper clothes, and even 49.1% respondents turned off the power of wireless paging system due to their concern about electricity bill and noise. 3) It was found that 83.6% respondents felt it necessary to use wireless paging system, and wireless paging users felt more satisfied with using the system than non-users, and 50.7% showed high satisfaction at certain psychological benefits like 'confidence in coping with critical situations' and 'a sense of relief'. In addition, it was found that some respondents who answered that 'they didn't turn off the paging system as they knew how it works' and those who answered that they knew 'how to use it' showed relatively high satisfaction. And some respondents who kept it well and felt it necessary also showed high satisfaction. 4) It was found that the level of satisfaction our respondents felt with using wireless paging system varied significantly availability($x^{2}$ = 12.759, p = .002), psychological advantages($x^{2}$ = 12.174, p = .002), knowledge about how to use system($x^{2}$ = 7.021, p = .016), power on/off($x^{2}$ = 13.221, p = .001), level of knowledge about system($x^{2}$ = 21.002, p = .000), maintenance($x^{2}$ = 9.871, p = .007) and level of necessity($x^{2}$ = 34.939, p = .000) on the statistical basis.