• Journal of the Mineralogical Society of Korea
• /
• v.16 no.2
• /
• pp.191-198
• /
• 2003

The ochreous precipitates, reddish brown and brownish yellow in color, are pre- cipitated in the stream bottom of acid mine drainage (AMD) in the Donghae coal mine area. X-ray diffraction analysis shows that the reddish brown precipitate consists mainly of ferrihydrite with small amount of goethite, while the brownish yellow precipitate of schwertmannite. Thermal experiments show that ferrihydrite and schwertmannite partially convert to poorly-crystallized hematite at $400^{\circ}C$ and to well-crystallized hematite at $700^{\circ}C$.

• Journal of the Computational Structural Engineering Institute of Korea
• /
• v.25 no.4
• /
• pp.279-285
• /
• 2012

In this paper a computational method for a homogenized peridynamics description of unidirectional fiber-reinforced composites is presented. For these materials, dynamic brittle fracture and damage are simulated with the proposed peridynamic model. Compared with observations from dynamic experiments by Coker et al.(2001), the peridynamic computational model can reproduce various characteristics of dynamic fracture and supersonic or intersonic crack growth in asymmetrically loaded unidirectional fiber-reinforced composite plates. Also we analyze the same model in the symmetric loading condition and figure out that the asymmetric loading leads to a much higher propagation speed. Consistent results have been reported in the experiments.

• Journal of the Computational Structural Engineering Institute of Korea
• /
• v.27 no.4
• /
• pp.297-303
• /
• 2014

Using the bond-based peridynamics and the parallel computation with binary decomposition, an adjoint shape design sensitivity analysis(DSA) method is developed for the dynamic crack propagation problems. The peridynamics includes the successive branching of cracks and employs the explicit scheme of time integration. The adjoint variable method is generally not suitable for path-dependent problems but employed since the path of response analysis is readily available. The accuracy of analytical design sensitivity is verified by comparing it with the finite difference one. The finite difference method is susceptible to the amount of design perturbations and could result in inaccurate design sensitivity for highly nonlinear peridynamics problems with respect to the design. It turns out that $C^1$-continuous volume fraction is necessary for the accurate evaluation of shape design sensitivity in peridynamic discretization.

• Journal of Navigation and Port Research
• /
• v.36 no.8
• /
• pp.683-689
• /
• 2012

The logistics industry is growing rapidly with China's economic development in recent years. Particularly, the intermodal freight system is becoming the main issue to reduce the logistic costs under the situation that the quantity of cargo transported between Korea and China is continuously increasing. Shift from road transportation to eco-friendly modes such as rail and coastwise shipping is also increasing. The present study suggests technical aspects related to the implementation of intermodal transport system centered on train ferries between two countries with already employed Chinese infrastructure into consideration. Technical assessment of intermodal train ferry system entails not only the vessels but supporting facilities and technologies as well. Port and rail facilities and operating skills for efficient modal shifting, and their standardization is indispensible to the realization of an intermodal train ferry system between the two countries.

• Journal of the korean academy of Pediatric Dentistry
• /
• v.35 no.1
• /
• pp.47-56
• /
• 2008

Risperidone is a widely prescribed atypical antipsychotic agent. Approved by the FDA as the first drug to treat irritability associated with autism in children, it is also used to treat tic disorder and Tourette's syndrome. Its adverse reactions related to dentistry include dry mouth, the mechanism of which is yet to be identified. The aim of this study is to identify, at the cellular level, how and to what extent risperidone affects intracellular free calcium concentration ($[Ca^{2+}]_i$), an primary intracellular factor in the regulation of fluid secretion in salivary gland cells. The human salivary gland cell line (HSG) was grown in MEM supplemented with 10% BCS. In order to measure $[Ca^{2+}]_i$, Fura-2/AM was loaded in the HSG, and fluorescence at 340 nm/380 nm excitation was measured in the 500 nm emission ratio. After every experiment, a calibration experiment was conducted in order to readjust the ratio to the actual $[Ca^{2+}]_i$. Changes in $[Ca^{2+}]_i$ were measured in the presence of carbachol, ATP and histamine. The researcher then explored how the pretreatment of risperidone affected such changes. Findings of this study include: 1. In HSG, $[Ca^{2+}]_i$ increased due to the addition of carbachol, ATP and histamine. The presence of risperidone inhibited the action of histamine on this process, while making little effect on that of carbachol and ATP. 2. A quantification of $[Ca^{2+}]_i$ in relation to histamine of different concentrations indicates that the effect of histamine was concentration dependent with an $EC_{50}$ of $3.3{\pm}0.5\;{\mu}M$. 3. The inhibitory effect of risperidone on histamine-induced $[Ca^{2+}]_i$ was concentration-dependent with an $IC_{50}$ of $104.4{\pm}14\;nM$. 4. Risperidone inhibits histamine-induced Ca2+ release from endoplasmic reticulum and influx of extracellular $Ca^{2+}$ in HSG cells(p<0.05).

• Journal of the Korean Chemical Society
• /
• v.31 no.4
• /
• pp.369-372
• /
• 1987

Five N-(2-acetyl-2-benzoyl-1-phenylethyl) piperidine derivatives (2a-2e) were synthesized from piperidine, benzoylacetone and benzaldehyde derivatives. Five ${\beta}$-acetyl-${\beta}$-benzoylstyrene derivatives (3a-3e) were synthesized from their adducts of piperidine derivatives. The structures of these compounds were confirmed by means of elemental analyses, ir and nmr spectra.

• The Journal of Korean Academy of Prosthodontics
• /
• v.49 no.2
• /
• pp.128-137
• /
• 2011

Purpose: Resonance frequency analysis, Periotest, and removal torque (RT) test were known as the methods to assess implant stability. The results of these methods are affected by the bone condition, implant diameter and shape. The purpose of this study is to access the meaning and the correlationship of the resonance frequency analysis, Periotest and RT test in osseointegration simulated acrylic resin when the engaged bone thickness and peri-implant bone defect are changed. Materials and methods: To simulate osseointegration, the fixture was fixed to an aluminum mold with a screw. Acrylic resin powder and liquid were poured into the mold for polymerization. The engaged resin thickness with implant was controlled. Simulated cortical bone thicknesses were 1, 3, 5 and 10 mm. Additional 1, 3 and 5 mm peri-implant bone defects were simulated. Three types of implants were used; 4 mm diameter implants of straight shape, 4 mm diameter implants of tapered shape and 5 mm diameter implants of tapered shape. Five fixtures per each type were tested in respective bone condition. Resonance frequency analysis and Periotest were evaluated in all bone conditions. Peak removal torque was measured at simulated cortical bone thicknesses of 1 and 3 mm. The statistical analysis was performed with the Kruskal-Wallis test, Mann-Whitney U test, and Spearman test using a 95% level of confidence. Results: With increasing engaged bone depth, the Implant Stability Quotient (ISQ) values increased and the Periotest values (PTVs) decreased (P<.001, P<.001). With increasing peri-implant bone defect, ISQ values decreased and PTVs increased (P<.001). When the diameter of implant increased, ISQ values increased and Periotest values (PTV) decreased (P<.001). There was a strong correlation between ISQ values and PTVs (r = -0.99, P<.001). Furthermore, the peak removal torque values had weak correlations with both ISQ values and PTVs (r = 0.52, P<.001 ; r = -0.52, P<.001). Conclusion: This study confirmed favorable implant stability with increasing engaged bone depth and implant diameter and decreasing peri-implant bone defect. ISQ values and PTVs showed strong correlation with each other and not with the peak removal torque values.

• Economic and Environmental Geology
• /
• v.56 no.3
• /
• pp.301-310
• /
• 2023

Ferrihydrite is an iron oxide mineral that is easily found in the natural environment, including acid mine drainage, and has a low crystallinity and high specific surface area, resulting in high reactivity with other ions, and can remove environmentally hazardous substances. However, because ferrihydrite is a metastable mineral, there is a possibility of releasing adsorbed ions by phase transformation to other minerals having low surface area and high crystallinity. In this study, the adsorption characteristics of arsenate, chromate, and selenate on ferrihydrite and the oxyanion removal efficiency of ferrihydrite were studied considering mineral phase transformation. At both pH 4 and 8, the adsorption of oxyanions used in the study were in good agreement with both Langmuir and Freundlich adsorption models except for selenate at pH 8. Due to the difference in surface charge according to pH, at pH 4 a higher amount of ions were adsorbed than at pH 8. The adsorption amount were in the order of arsenate, chromate, and selenate. These different adsorption models and adsorption amounts were due to different adsorption mechanisms for each oxyanions on the surface of ferrihydrite. These adsorption characteristics were closely related to changes in the mineral phase. At pH 4, a phase transformation to goethite or hematite was observed, but only a phase transformation to hematite was observed at pH 8. Among the oxyanion species on ferrihydrite, arsenate showed the highest adsorption capacity and hardly caused phase transformation during the experimental period after adsorption. Contrary to this, chromate and selenate showed faster mineral phase transformation than arsenate, and selenate had the lowest retardation effect among the three oxyanions. Ferrihydrite can effectively remove arsenate due to its high adsorption capacity and low phase transformation rate. However, the removal efficiency for other two oxyanions were low by the low adsorption amount and additional mineral phase transformation. For chromate, the efficient removal is expected only at low concentrations in low pH environments.

• Korean Chemical Engineering Research
• /
• v.54 no.1
• /
• pp.52-56
• /
• 2016

As an effective method for extraction of succinic acid, aqueous two-phase systems based on piperidinium ionic liquids were used in this study. Effects of the alkyl chain length of cation in piperinidium ionic liquids on phase diagram and extraction efficiencies were investigated. Experimental results show that aqueous two phase systems can be formed by adding appropriate amount of piperidinium ionic liquids to aqueous $K_2HPO_4$ solutions. It can be found that the ability of piperidinium ionic liquids for phase separation followed the order [OMPip][Br]>[HMPip][Br]>[BMPip][Br]>[EMPip][Br]. The biphase-forming ability of piperidinium ionic liquids was higher than that of imidazolium and pyrrolidinium ionic liquids in the presence of $K_2HPO_4$. 75~95% of the succinic acid could be extracted into the ionic liquid-rich phase in a single-step extraction. There was little difference in the extraction efficiency of succinic acid by piperidinium ionic liquids comparing to other ionic liquids such as imidazolium and pyrrolonidium ionic liquids. This aqueous two phase system by piperidinium ionic liquid is suggested to have effective application for the separation of succinic acid.

• Pediatric Gastroenterology, Hepatology & Nutrition
• /
• v.5 no.2
• /
• pp.129-135
• /
• 2002

Purpose: The purpose of this study was to investigate the relationship between Helicobacter pylori (H. pylori) infection and iron-deficiency anemia in pubescent children, susceptible to iron deficiency due to the high iron requirements for growth. Methods: Hemoglobin, serum iron, total iron-binding capacity, serum ferritin, and serum IgG antibodies to H. pylori were measured in 937 children (475 boys and 462 girls). Their ages ranged from 10 to 18 years. The prevalences of H. pylori infection were compared between groups, based on the presence or absence of anemia, hypoferritinemia, iron deficiency, and iron-deficiency anemia. The levels of hemoglobin, serum iron, total iron-binding capacity, transferrin saturation, and serum ferritin were obtained according to the presence or absence of H. pylori infection. Results: The prevalences of anemia, iron deficiency, iron-deficiency anemia, and H. pylori infection were 8.1%, 9.1%, 3.1%, and 20.8%, respectively. The H. pylori-positive rates in anemia, hypoferritinemia, and iron-deficiency group were 34.2%, 29.5%, and 35.3%, respectively, compared to 19.6% in the non-anemia group, 19.2% in the non-hypoferritinemia group, and 19.4% in the non-iron deficiency group. The H. pylori-positive rate in the iron-deficiency anemia group was 44.8% in comparison with 20.0% in the non-iron-deficiency anemia group. Hemoglobin and iron levels did not show any significant differences between the H. pylori-positive and -negative groups, whereas the serum ferritin level decreased significantly in the H. pylori-infected group. Conclusion: H. pylori infection is thought to be associated with iron deficiency in pubescent children.