• Proceedings of the Korean Society of Propulsion Engineers Conference
• /
• 1995.05a
• /
• pp.23-29
• /
• 1995

Fafbric 4종, 수지2종과 상용화된 프리프레그 2종에 대한 내열특성에 관하여 비교 연구 하였다. Fabric의 특성은 알려진 바와 같이 PAN계 카본 fabric의 경우 내삭마성은 우수하나 단열성능이 떨어지고, Rayon계의 경우는 그 반대이다. 공정성면에서는 rayon spun yarn으로 제직한 경우가 가장 우수한 것으로 나타났다. Spun PAM으로 제직한 경우는 직조후 탄화공정을 채택함으로써. 노즐재료로서 PAN계 탄소섬유의 사용을 가능하게 하였지만 즉 공정성은 좋으나 단열성 및 내삭마성 모두가 떨어졌다. F940수지의 경우는 SC1008과 페놀수지의 화학적특성은 다소 차이가 있으나 물리적특성이나 열적특성은 거의 유사한 것으로 나타났다. 프리프레그의 제조는 각수지와 Fabric의 조건에 맞게 R/C, V/C를 조정하여 코팅하였다. 토오치 테스트등 결과들을 종합해보면 전체적인 노즐재료로서의 성능은 아직은 Rayon계 카본이 우수한것으로 판단할수 있으나, 보다 정확한 평가를 위해서는 실제 노즐 테스트가 필요하다.

• Resources Recycling
• /
• v.17 no.5
• /
• pp.19-27
• /
• 2008

In this study, the porosity and electrical resistivity of the formed coke produced by sintering the mixture of domestic anthracite and phenolic resin were mainly investigated, when the effect of the amount of binder, the hydration temperature and time, the hardening temperature and time, sintering temperature and time, the particle size of anthracite, the grade of anthracite, and the mixing ratio of phenolic resin on the physical properties of the coke were studied. As a result, It was found that the electrical resistivity and porosity of the formed coke are varied in the range of $0.3\sim1.2\Omega{\cdot}cm$ of $10\sim30%$, respectively, in accordance with the variation of factors.

• KSBB Journal
• /
• v.13 no.2
• /
• pp.220-222
• /
• 1998

Three microbial consortia were screened for their ability to degrade phenolic resin, resole as a sole carbon source. These microbial consortia were derived from soil samples collected from a phenolic resin manufacturing plant site. Among the consortia, the test consortium, designated as MS2, displayed approximately 70% degradation of the substrate, 100 mg of resole per liter, within the fist twelve days of incubation but the degradation was inhibited. During the incubation period, pH was decreased from 7.0 to 2.7, and the resole degradation became inhibited under the conditions. UV-scans of spent culture showed that the wavelength of maximum absorption was 261 nm for resole.

• Environmental engineer
• /
• s.40
• /
• pp.50-53
• /
• 1989

본 회사는 제비표 페인트 제조회사인 건설화학과 대일본 잉크화학공업(주)와 합작회사로서 1971년에 설립되어 공업용 접착제인 페놀수지를 국내 최초로 생산하여 자동차, 도료, 전자산업 발전에 이바지하였고, 각종 도로 경기장을 우레탄 수지를 생산하므로서 88올림픽 경기를 통하여 국제적으로 품질의 우수성을 인정받은 바 있습니다. 현재 반월공장은 대지가 12,523평, 건평 4,694평, 종업원 280명으로서 안양에서 '88. 10.12 이전하여 본사와 공장기능

• Journal of Korea Foresty Energy
• /
• v.24 no.1
• /
• pp.33-38
• /
• 2005

To find a new use of wood tar which is obtained from the manufacturing process of wood charcoal, a resol type of phenol adhesive using wood tar was made and some adhesion tests on plywood were examined. Phenol adhesive synthesized with pine tar was almost same as an original phenol adhesive in physical properties such as solid content and viscosity and tensile-shear adhesive strength of plywood made of phenol adhesive synthesized with pine tar was not much lower than the original one in non-waterproof and waterproof tests. Phenol adhesive synthesized with oak tar, however, was different from original phenol adhesive in physical properties. Adhesive strength of plywood made of oak tar was $50\%$ lower than the original one on waterproof tests. The amount of emitted formaldehyde increased as the amount of wood tar increased.

• Journal of Adhesion and Interface
• /
• v.12 no.3
• /
• pp.88-93
• /
• 2011

Optimal dispersion and fabrication conditions of carbon nanotube (CNT) embedded in phenolic resin were determined by electrical resistance measurement; and interfacial property was investigated between plasma treated carbon fiber and CNT-phenolic composites by electro-micromechanical techniques. Wettability of carbon fiber was improved significantly after plasma treatment. Surface energies of carbon fiber and CNT-phenolic nanocomposites were measured using Wilhelmy plate technique. Since surface activation of carbon fiber, the advancing contact angle decreased from $65^{\circ}$ to $28^{\circ}$ after plasma treatment. It was consistent with static contact angle results of carbon fiber. Work of adhesion between plasma treated carbon fiber and CNT-phenolic nanocomposites was higher than that without modification. The interfacial shear strength (IFSS) and apparent modulus also increased with plasma treatment of carbon fiber.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.17 no.9
• /
• pp.27-33
• /
• 2016

Phenolic resin has excellent heat resistance and good mechanical properties as a thermosetting resin. However, its thermosetting characteristics cause it to produce a non-recyclable waste in the form of sprue and runner which is discarded and represents up to 15~20% of the overall products. Forty thousand tons of phenolic resin sprue and runner are disposed of (annually). The (annual) cost of such domestic waste disposal is calculated to be 20 billion won. In this study, discarded phenol resin scraps were pulverized and treated by silanes to improve their interfacial adhesion with HDPE. The sizes of the pulverized pulverulent bodies and fine particles were (100um~1000um) and (1~100um), respectively. The pulverized phenol resin was treated with 3-(methacryloyloxy) propyltrimethoxysilane and vinyltrimethoxy silane and the changes in its characteristics were evaluated. The thermal properties were evaluated by DSC and HDT. The mechanical properties were assessed by a notched Izod impact strength tester. When the silane treated phenol resin was added, the heat distortion temperature of HDPE increased from $77^{\circ}C$ to $96^{\circ}C$ and its crystallinity and crystallization temperature also increased. Finally, its impact strength and tensile strength increased by 20% and 50%, respectively, in comparison with the non-treated phenol resin.

• Proceedings of the Korean Fiber Society Conference
• /
• 1987.06b
• /
• pp.8-8
• /
• 1987

• Fire Protection Technology
• /
• s.47
• /
• pp.15-24
• /
• 2009

• Korean Chemical Engineering Research
• /
• v.55 no.2
• /
• pp.220-224
• /
• 2017

In this study, we investigated a new recycling method of phenol resin, which is widely used to make electric insulation boards and adhesives, into carbon particles by using supercritical fluids. Because phenol resin is insoluble and infusible, most of the phenol resin wastes are buried in the ground or incinerated, which leads to environmental pollution. Therefore, development of a new method to recycle phenol resin waste is an urgent issue. In this study, phenol resin waste was treated with four sub/supercritical solvents: ethanol, acetone, water, and methanol. For all the sub/supercritical solvents, the phenol resin wastes were broken down into carbon nano particles at much lower temperatures than that required in the existing carbon particle manufacturing processes. We investigated the difference of morphologies and physical properties of recycled carbon particles according to the use of various solvents. As a result, carbon nano particles with the same amorphous structure were obtained from phenol resin waste with the usage of various sub/supercritical solvents at much lower temperature.