• Proceedings of the KIPE Conference
• /
• 2010.07a
• /
• pp.117-118
• /
• 2010

본 논문은 저온플라즈마를 이용한 탈황탈질 시스템에서 고압펄스압축을 위해 사용되는 자기스위치의 자동제어방법에 관한 것이다. 자기스위치를 부하변동에 따라 자동제어 함으로써 플라즈마 반응기에 전달되는 에너지의 전달효율을 최적화 시킬 수 있다.

• Proceedings of the Optical Society of Korea Conference
• /
• 2001.02a
• /
• pp.242-243
• /
• 2001

고출력 펨토초 레이저 기술은 커렌즈 모드록킹 기술, Ti：sapphire 이득매질의 개발, chirped pulse amplification (CPA) 등의 도움으로 1980년대 후반부터 급속히 발전해 왔다. 생성된 펨토초 펄스의 시간적 특성을 정확히 알아내기 위한 방법들도 많이 연구되어 주파수 분해 괌게이팅(FROG)이나 주파수위상 간섭계(SPIDER) 등의 방법들이 기존의 자체상관계를 대체하게 되었다. 극초단 레이저 펄스는 넓은 스펙트럼을 갖고 첨두출력이 높기 때문에 매질이나 광학계를 지나면서 군지연분산, 자체위상변조 등의 효과에 의한 시간적 위상변화가 쉽게 생긴다. (중략)

• Korean Journal of Optics and Photonics
• /
• v.17 no.6
• /
• pp.556-563
• /
• 2006

We present a comprehensive study of a chirped pulse Ti:sapphire regenerative amplifier system operating at 1 kHz. Main constituents of the system are described in detail. The amplifier stage was first converted to a repetition rate-tunable kHz gain-switched nanosecond Ti:sapphire laser. Operation characteristics at different repetition rates such as build-up times of laser pulses, pump power-dependent output powers and pulse durations, damage thresholds, and tunability ranges were studied. Based on the results achieved, the switching time of the Pocket's cell used and the round trip numbers in the regenerative amplifier were optimized at 1 kHz. The output pulses with a pulse width of 50fs from a home-made Ken lens mode-locked Ti:sapphire oscillator were used as seed pulses. The pulses were expanded to 120ps in a grating stretcher prior to coupling into the 3-mirror amplifier cavity. After amplification and recompression, a stable 1kHz Ti:sapphire regenerative amplifier system, which delivers 85-fs, $320-{\mu}J$ pulses, was fully constructed.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.17 no.11
• /
• pp.2479-2485
• /
• 2013

In this paper, we present a design for solid-state radar SSPA with sequential bias. We apply to variable extension pulse generator to eliminate signal distortion which is caused by bias rising/falling delay of power amplifier. There is an optimum impedance matching circuit to have high efficiency of GaN-power device by measuring microwave characteristics through load-pull method. The designed SSPA is consisted of pre-amplifier, drive-amplifier and main-amplifier as a three stages to apply for X-Band solid-state radar. Thereby we made a 200W SSPA which has output pulse maximum power shows 53.67dBm and its average power is 52.85dBm. The optimum design of transceiver module for solid-state pulse compression radar which is presented in this dissertation, it can be available to miniaturize and to improve the radar performances through additional research for digital radar from now on.

• Korean Journal of Air-Conditioning and Refrigeration Engineering
• /
• v.5 no.2
• /
• pp.94-101
• /
• 1993

Recently, efforts of decreasing energy consumption are continously increased and user's preference is also diversified in refrigeration and air conditioning systems. Thus, in order to satisfy these demands, high efficiency, high intelligence, and energy saving for those systems are essential. As the basic study for diverse functions and intelligence of those systems, we investigated the response characteristics through the compressor capacity control concerned with superheat and refrigeration room temperature. And, response characteristics are investigated experimentally by using micro computer based PWM inverter control method. Experimental result of the conventional on-off control method is given in order to be compared to the results of inverter control method. The results obtained through this study are summarized as follows. It is shown from the experimental results of the on-off control method that the range of temperature variation around the steady state ($-18^{\circ}C$) is very large (about $7{\sim}8^{\circ}C$) and the settling time bringing the steady state is not found. In the inverter control method, we can see that the refrigeration room temperature after reaching the setting temperature is very stable without fluctuation and a robust control for disturbance such as opening the door has been realized.

• Journal of Biomedical Engineering Research
• /
• v.23 no.1
• /
• pp.61-72
• /
• 2002

In this parer, a new harmonic imaging technique is Proposed and evaluated experimentally. In the Proposed method. a weighted chirp signal with a hanning window is transmitted. The RF samples obtained on each array element are individually compressed by correlating with the reference signal defined as the 2nd harmonic component($2f_0$) of a transmitted chirp signal generated in a square-law system. The correlator output will then consist of the compressed version of the $2f_0$ component generated in tissue and the crosscorrelation sequence of the fundamental($f_0$) and 2f$_{0}$components. The Proposed method uses the compressed $2f_0$ component to form an image. for which the crosscorrelation term should be suppressed below at least -50dB. The Proposed method has two process, 2f$_{0}$-correlation and $2f_0$-correlation(PI) . $2f_0$-correlation can successfully eliminate the $f_0$ component with a single transmit-receive events and therefore is more efficient than the conventional Pulse inversion method in terms of the frame rate. 2i)-correlation(Pl) Performs pulse compression after applying pulse inversion method for the 2nd harmonic image with high resolution and SNR. Another advantage of the proposed method is that the SNR of 2nd harmonic imaging can be improved without limitation by increasing the duration of the chirp signal. The proposed method was verified through both the computer simulations and actual experiments .ts .

• Korean Journal of Air-Conditioning and Refrigeration Engineering
• /
• v.15 no.9
• /
• pp.738-743
• /
• 2003

In the present study, the heating and cooling characteristics of system air-conditioner using a PWM compressor or a BLDC inverter compressor are investigated by the psychometric calorimeter using air enthalpy method. Cooling and heating capacities, power inputs and COPs are measured at the low, moderate, high loads under the cooling and heating standard conditions. At cooling conditions, the capacity of the PWM system is larger than that of the inverter case. Due to large power input, however, low COPs are measured under total load ranges. At heating conditions, the capacity of the PWM method is a little larger than that of the inverter case, except high load range. Since power input is low, large COPs are measured at moderate and high load ranges, which are different from cooling data. This shows that the PW system compared with the inverter case has good energy consumption efficiency at moderate and high load ranges except low load range. And when the system A/C is operated under the cooling and heating standard conditions, COPs are nearly uniform at total load ranges.

• Proceedings of the IEEK Conference
• /
• 2003.07e
• /
• pp.2196-2199
• /
• 2003

With the development of digital signal processor(DSP), digital pulse compressor (DPC) is commonly used in radar systems. A DPC is implemented by using finite impulse response(FIR) filter algorithm in time domain or fast Fourier transform(FFT) algorithm in frequency domain. This paper compares the computation complexity tot these two methods and calculates boundary Fm filter taps that determine which of the two methods is better based on computation amount. Also, it shows that the boundary FIR filter taps for DSP, ADSP21060, and those for computation complexity have similar characteristic.

• Proceedings of the KIEE Conference
• /
• 2006.07c
• /
• pp.1546-1547
• /
• 2006

오늘날 전자기파의 영향은, 제어장비의 내부에 있는 기판의 전자 부품에 전자기적인 충격을 주어 장비의 오동작이나 고장을 일으키는 등 심각한 문제들이 제기 되고 있다. 이러한 임펄스 전자기파는 제어 장치에 연결된 제어전선으로 타고 들어와서 전자장비 내부의 부품들과 반사,공진등을 일으켜서 결국에는 PCB(printed circuit board)에 손상을 입혀서 그 장치들을 사용 못하게 할 수가 있다. 주파수가 광대역인 50MHz 에서 800MHz 까지의 EMI(electro magnetic interference)환경을 만들 수 있는 장치를 제작 하였다. 이러한 UWB(ultra wide band)장치는 고전압펄스를 압축 성형하여, 동작시간이 아주 빠른 ultra fast 스위치를 통해서, 펄스의 기림 시간이 수백ps의 파형을 만들어, 안테나로 전송하여 공간으로 방사시키는 장치에 대해 설계 제작하여 실험한 결과에 대해 논하고자 한다.

• Journal of Biomedical Engineering Research
• /
• v.23 no.1
• /
• pp.49-60
• /
• 2002

Receive dynamic focusing with an array transducer can provide near optimum resolution only in the vicinity of transmit focal depth. A customary method to increase the depth of field is to combine several beams with different focal depths, with an accompanying decrease in the frame rate. In this Paper. we Present a simultaneous multiple transmit focusing method in which chirp signals focused at different depths are transmitted at the same time. These chirp signals are mutually orthogonal in a sense that the autocorrelation function of each signal has a narrow mainlobe width and low sidelobe levels. and the crossorelation function of any Pair of the signals has values smaller than the sidelobe levels of each autocorrelation function. This means that each chirp signal can be separated from the combined received signals and compressed into a short pulse. which is then individually focused on a separate receive beamformer. Next. the individually focused beams are combined to form a frame of image. Theoretically, any two chirp signals defined over two nonoverlapped frequency bands are mutually orthogonal In the present work. however, a tractional overlap of adjacent frequency bands is permitted to design more chirp signals within a given transducer bandwidth. The elevation of the rosscorrelation values due to the frequency overlap could be reduced by alternating the direction of frequency sweep of the adjacent chirp signals We also observe that the Proposed method provides better images when the low frequency chirp is focused at a near Point and the high frequency chirp at a far point along the depth. better lateral resolution is obtained at the far field with reasonable SNR due to the SNR gain in Pulse compression Imaging .