• Journal of the Korean Society of Propulsion Engineers
• /
• v.19 no.2
• /
• pp.1-8
• /
• 2015

Dual pulse rocket motor is a variant of solid rocket motor with two propellant grain separated by a pulse separation device. The major performance of such a rocket motor is influenced by the change in the hole area of pulse separation device to nozzle throat area ratio. In this study, we performed flow analysis to investigate the internal flow characteristics according to the pulse separation device hole area to nozzle throat area ratio change. Gases used flow analysis were used combustion gas of HTPB/AP composite propellant and nitrogen gas. Flow analysis results of the dual pulse rocket motor were validated by comparison with experimental results of pneumatics. Commercial CFD code ANSYS FLUENT 14.5 is used in this study to simulate flow analysis.

• Proceedings of the KIPE Conference
• /
• 2015.07a
• /
• pp.483-484
• /
• 2015

본 논문에서는 새로운 형태의 철도 차량용 추진 시스템인 리니어펄스모터의 구조적 특징을 분석하고 그 구조적 특징으로 발생하는 문제점의 해결방안을 제시한다. 따라서 지상에 포설되는 2상의 고정자 상권선 중 A상 권선 상부에 B상 권선이 적층되어 포설되는 특징으로 인하여 발생하는 일종의 토크 리플 성분을 저감하기 위한 기법을 제시하며 모의실험 및 실제 실험을 통하여 제시한 토크 리플 저감 기법의 타당성을 검증한다.

• Proceedings of the KSME Conference
• /
• 2001.06c
• /
• pp.519-524
• /
• 2001

These days, $Al_[2}O_{3}$ ceramic use all over the industry because dynamic function and special properties to compare traditional material. But $Al_[2}O_{3}$ ceramic is high hardness and brittleness materials. For this reason, it is very difficult to process. Therefor, In this paper, it was investigated that laser process parameter, which can produce appropriate quality of $Al_[2}O_{3}$ ceramic microhole machining utilized Nd:YAG laser and Excimer laser.

• The Transactions of the Korean Institute of Power Electronics
• /
• v.5 no.3
• /
• pp.238-245
• /
• 2000

본 논문은 펄스 인버터용 TIG(Tungsten Inert Gas) 아크 용접기를 구현하는 용접전원장치의 성능에 관하여 알아본다. 용접전류는 펄스형태로 제어되고 또한 안정된 아크와 좋은 용접성능을 얻을 수 있다. DC 고전압 아크 스타트 시스템을 채용한 TIG 아크용접기에 대해 토치와 용접전원 사이의 연장 케이블이 50m 나 되어도 아크 스타트이 실패 없이 용접을 행할 수 있음을 알 수 있었다. 따라서, 이 DC 고전압 아크 스타트방식을 이용한다면 용접 전원장치와 용접장이 멀리 떨어져 있는 조선소와 같은 장소에서 요용하리라 생각된다. 이를 확인하기 위하여 시뮬레이션 및 실험을 행하였다.

• Asia-Pacific Journal of Business Venturing and Entrepreneurship
• /
• v.2 no.1
• /
• pp.153-169
• /
• 2007

It is as result that study to apply mini magnet nerve curer in peripheral nervous system disease treatment. Design and embodied action power and Control Unit in cylinder form of magnet roof object firstly. Yielded service area about special quality of probe of roof object cylinder style and treatment area dimension and distance of treatment pulse secondly. Embody pulse forming course energy value by Probe's form by third, could embody treatment pulse by disease. Specially, through a special quality experiment, saved Damping pulse form and treatment pulse form etc. variously. Lately, embodied this to aid a little in disease treatment that follow that there is no invasion that there is no stimulation by medicine development. Go amplitude treatment pulse (traditional magneto-therapy of greatly great that strong) does curative effect greatest at short time and becomes thought that demand is magnified greatly at the future in this research.

• The Transactions of the Korean Institute of Power Electronics
• /
• v.6 no.5
• /
• pp.377-385
• /
• 2001

The mixed gas of Hydrogen and Oxygen is gained from water electrolysis reaction. It has constant volume ratio 2 : 1 Hydrogen and Oxygen, and it is used as a source of thermal energy by combustion reaction. This gas has better characteristics in the field of economy, efficiency of energy, and environmental intimacy than acetylene gas and LPG used for gas welding machine. So several studies of this gas are actively in progress nowadays. The object of this study is the optimization of power condition in the side of electricity for the Hydrogen-Oxygen gas generator, Firstly chemical analysis of electrolysis is conducted, and the relation of electrical energy and chemical energy is quantitatively investigated through Faraday's laws of electrolysis. After that, pulse power supply is designed for basic experiment which could be applied to the analysis of Hydrogen-Oxygen gas generator. In the basis of above steps, comparison and analysis of Hydrogen-Oxygen gas generator was conducted as variable frequency using pulse Power supply.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.14 no.12
• /
• pp.6114-6118
• /
• 2013

This study examined the ultrasonic pulse reflection method(UPRM) for testing each ultrasonic pulse waveform model(UPWM) based on weld defects. The sharp crack of a clear signal was generated. The echo height of the defective probes changed according to the location. In a long crack in a circle around the defective probes, the Swivel scanning echo height when using the particle was reduced drastically. The peaks in the echo were thin because the needle was pointed. The porosity defects arising from a single echo was sharp and crisp, but a number of pores of the collective reflection overlapped and ajagged echo was observed. Slag, slag inclusions, cracks, and defects at the Swivel scan of each particle using the echo shape showed difference in the degree. Cracks were revealed as sudden changes in the echo height of the slag inclusions: increase ${\rightarrow}$ decrease ${\rightarrow}$ increase ${\rightarrow}$ decrease. In addition, the location of a number of defects in the dense pore geometry, such as a typical echo sundry, revealed the shape in the slag. Poor penetration of the defect echo, revealed the cracks to have a sharp-edged, crack-like shape with an echo.

• The Transactions of the Korean Institute of Electrical Engineers B
• /
• v.53 no.3
• /
• pp.180-187
• /
• 2004

A conventional power supply of a microwave oven has a 60Hz transformer and high voltage capacitor(HVC). Though it is very simple and has low cost, it has several problems such as large size, heavy weight and low efficiency To improve these problems, various high frequency inverter type power supply have been investigated and developed in recent years. But these cost is higher than the conventional one due to additional control circuit, fast switching devces. In this paper, a novel pulse power supply for microwave oven using high frequency transformer embedded HVC(High Voltage Capacitor) is proposed for down-sizing, cost reduction and efficient improvement. To verify the effectiveness of the proposed transformer, an equivalent circuit of transformer embedded HVC is derived and it's characteristic is described. And the validity of the proposed pulse power supply embedded HVC-high frequency transformer is shown by simulations and experiments accroding to various operating conditions.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 1992.10a
• /
• pp.96-100
• /
• 1992

각종 금형 중 사출금형과 프레스 금형이 전체의 80~90%를 차지하고 있으며, 이들 금형을 가공할 때 방전가공이 주로 이용되되 있다. 금형재료 중에서 합금공구강(STD 11)은 열처리하였을 때 경도가 매우 커서 프레스 금형의 다이오와 펀치 등에 널리 사용되고 있다. 이것은 Wire-EDM 이나 Die Sinking EMD으로 가공하고 있다. 따라서 본 연구에서 프레스 금형의 다이와 펀치 등에 널리 사용되는 열처리된 STD11을 사용하여 가공 제특성에 영향을 주는 가공조건, 즉 방전전류펄스폭 및 방전전류파 고치를 변화시켜 이에 따른 공작물 가공량, 전극소모비, 표면조도, 가공단면의 열변질층 및 경도 변화 등 방전가공비의 성상을 조사하여 STD11의 최적의 방전가공조건을 찾고자 하는 것을 목적으로 하였다.

• Proceedings of the KIPE Conference
• /
• 1998.07a
• /
• pp.154-157
• /
• 1998

In this paper, the inverter TIG(Tungsten Inert Gas) welding system with high power efficiency by means of pulse current control of welding process is presented. In TIG welding, pulse current control is utilized in order to attain less apatter and high welding performance. The four factors which determine the welding performance of the pulse current are frequency, base current, peak current, and peak current duty current, and peak current duty ratio. In this paper, we analyze these factors should be controlled to achieve minimum power input. To demonstrate the practical significance of our results, we present some experimental results as well as simulation results.