• Proceedings of the Optical Society of Korea Conference
• /
• 1996.09a
• /
• pp.46-46
• /
• 1996

• Proceedings of the KIEE Conference
• /
• 1987.07b
• /
• pp.1333-1337
• /
• 1987

본 연구는 머리운동 제어 시스템에 대한 생체 물리학적인 모델링과 시뮬레이션을 통하여 모델의 동특성을 조사하였으며, 생체운동(머리-안구)의 상호 관계를 비교하였다. 결과를 요약하면 다음과 같다. 1) 시스템을 구성하고 있는 매개변수의 변화가 출력에 미치는 영향을 조사하기 위해 감도해석법을 써서 감도계수를 구한 결과, 입력 제어신호의 펄스높이(PH), 동근의 펄스폭(PW1), 길항근의 펄스폭(PW2)이, 시스템의 출력특성을 결정하는 가장 중요한 매개변수 임을 알 수 있었다. 2) 비 선형 제어모델의 선형화를 통하여 선형모델의 응답특성과 크나큰 차이가 없음을 알았다. 3) Main-Sequence도를 작성하여 실험 데이터와 비교한 결과, 거의 일치함으로서 모델의 타당성을 입증하였다. 4) 머리운동이 시간최적으로 응답하기 위해서는 bang-bang 제어법칙이 적용되어야 함을 알았다. 5) 머리운동이 목표점에 도달하는 순간에는 길항근의 역제통 펄스가 가해 짐으로서, 길항근이 궤적의 마지막 부분을 지배함을 알았다. 6) 머리-안구운동의 main-sequence도를 비교 함으로서 상호관계를 규명하였다. 앞으로는 이 모델링 법을 개선확장하면, 비행시 파일럿의 생체 시뮬레이션, 헬멧 조준 사격 시스템등의 항공공학, 생체의용공학 연구 및 제어입력을 생체신호로 하는 로봇틱스 연구에 본 연구 방법은 유용하리라 생각된다.

• Journal of the Korean Society for Railway
• /
• v.15 no.2
• /
• pp.116-121
• /
• 2012

DC/DC switching power converters produce DC output voltages from different DC input sources. The converter is used in regenerative braking of DC motors to return energy back in the supply, resulting in energy savings for the systems containing frequent stops. The DC/DC converter is composed of a PWM-IC (pulse width modulation integrated circuit) controller, a MOSFET (metal-oxide semi-conductor field-effect transistor), an inductor, capacitors, and resistors, etc. PWM is applied to control and regulate the total output voltage. In this paper, radiation shows the main influence on the changes in the electrical characteristics of comparator, operational amplifier, etc. in PWM-IC. In the PWM-IC operation, the missing pulses, the changes in pulse width, and the changes of the output waveform are studied by the simulation program with integrated circuit emphasis (SPICE) and compared with experiments.

• The Journal of the Acoustical Society of Korea
• /
• v.16 no.2
• /
• pp.5-9
• /
• 1997

In this paper, when we use the chirp signal as input signal of ultrasonic signal system the technique for determining the bandwidth of the chirp signal that maximizes the amplitude of the compressed ultrasonic echo signal has been studied. In ultrasonic signal processing systems, the signal-to-noise ratio of the echo signal can be too low due to damping and scattering of the ultrasonic wave during transmission. Method of pulse compression using chirp signal is a means to increase the signal-to-noise ratio in ultrasonic pulse-echo systems. Simulation and experimental results showed that the output signal of ultrasonic system was increased by pulse width of chirp signal and the optimum-bandwidth of the chirp signal was 1.15 times larger than the bandwidth of the ultrasonic system.

• Korean Journal of Optics and Photonics
• /
• v.11 no.5
• /
• pp.353-359
• /
• 2000

A harmonically mode-locked fiber ring laser cavlty was theoretically analyzed. The measured charactenstlcs of a 10 GHz erbium-doped fiber ring laser were used as a basis of the theoretical analysis. From the nonlinear Schroedinger equation of an actively mode-locked erblUm-doped fiber laser. the effects of the components inside the laser cavity have been analyzed includmg nonlinear effects from group-velocity dispersion (GVD) and self-phase modulation (SPM). Usmg the analysls. we have designed a laser cavity with minimum pulsewidth and chirp by changing the intracavity optical intensity and the bandwidth of the filter. In the new design, the chirp i, reduced by 2 times and the pulsewidth by 2A times. compared to the laser used in the experiment. iment.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.42 no.3
• /
• pp.649-660
• /
• 2017

In electronic warfare, the pulse amplitude, one of information of a pulse signal emitted by an enemy, is used for estimating distance from the source and for deinterleaving mixed source signals. An estimate of pulse amplitude is conventionally determined as the maximum magnitude of a Fourier transformed signal within its pulse width which is estimated pre-step in an electronic warfare receiver. However, when frequency modulated signals are received, it is difficult to estimate their pulse amplitudes with this conventional method because the energy of signals is dispersed in frequency domain. In order to overcome this limitation, this paper proposes an enhanced pulse amplitude estimation method which calculates the average power of the received pulse signal in time domain and removes the noise power of the receiver. Simulation results show that even in case the frequency modulated signal is received, the proposed method has the same performance as estimating the pulse amplitude when unmodulated signal is received. In addition, the proposed method is shown to be more robust to an estimation error of pulse width, which affects the estimation performance of pulse amplitude, than the conventional method.

• Journal of the Korea Society of Computer and Information
• /
• v.6 no.2
• /
• pp.8-13
• /
• 2001

We demonstrate a pulsed CO$_2$laser with long pulse duration of millisecond order in the low pressure less than 30 Torr. A new power supply for our laser system switches the voltage of AC power line(60㎐) directly. The power supply doesn't need elements such as a rectified bridge, energy-storage capacitors. and a current-limiting resistor in the discharge circuit. In order to control the laser output power, the pulse repetition rate is adjusted up to 60㎐ and the firing angle of SCR gate is varied from 30˚ to 150˚. A ZCS(Zero Crossing Switch) circuit and a PIC one-chip microprocessor are used to control the gate signal of SCR precisely. The maximum laser output is 23W at the total pressure of 18 Torr, the pulse repetition rate of 60㎐, and SCR gate firing angle of 90˚. In addition, the obtained laser pulse width is approximately 3㎳(FWHM)

• Journal of the Institute of Convergence Signal Processing
• /
• v.10 no.3
• /
• pp.193-197
• /
• 2009

In this paper, we study on design of vehicle control system which is based on ${\mu}C/OS-II$, We component a electric motor drive system for simulator because the most of vehicle part use electric motor for actuator. We use the XC2287 microcontroller which is often used vehicle body controller because XC2287 guarantee high confidence and durability in vehicle industry. The electric motor control system derive PWM from general I/O port in XC2287 microcontroller. The signal is supplied at electric motor after amplifying that using driver circuit. The user control duty of PWM signal through controlling potentiometer which is connected to XC2287. through that, the user control speed of electric motor. we synchronize both input process via controlling potentiometer and PWM output process using semaphore. we verify porting of ${\mu}C/OS-II$ via experimentation.

• Korean Journal of Optics and Photonics
• /
• v.1 no.1
• /
• pp.22-27
• /
• 1990

The cavity-length detuning characteristics of the hybridly mode-locked dye laser have been studied with a collinear autocorrelator. In the optimum condition, the pulse width is 0.65 ps about three times as short as that of the synchronously mode-locked dye laser. As the cavity length is increased, the pulse width becomes broader than that at the optimum cavity length because of the effect of spontaneous emission. Also, the spectrum width becomes broad, therefore the time bandwidth product ($\Deltat\Deltav$) is increased. The peak power of autocorrelation is maximum at $\Deltat=5.0\umm$ longer than the optimum cavity length. On the other hand, as the cavity length is decreased, the pulse width becomes broader and the satellite pulses appear because of the gain recovery. Also the spectrum width becomes narrower than that at the optimum cavity length. In particular, at the mismatched cavity length the center of the lasing spectrum moves to shorter wavelengths. ngths.

• Proceedings of the KIPE Conference
• /
• 2015.11a
• /
• pp.48-49
• /
• 2015

본 논문에서는 3상용 6팩 인버터 모듈을 이용한 가극성 커플드 인덕터를 갖는 영전압 스위칭 펄스-폭변조 단상 풀-브릿지 인버터를 제안한다. 모듈을 이용하기 때문에 시스템의 조밀한 설계가 가능하여 영전압 스위칭 구현에 있어 큰 영향을 미칠 수 있는 기생 성분들을 줄이는데 용이할 수 있다. 본 논문에서 제안된 회로의 동작 원리와 특성들을 다룰 것이며 시뮬레이션을 통하여 가능성을 검증하였다.